Recommended Adapter to Install Yakima Raptor Aero Roof Bike Carrier # Y02093 on 2006 Toyota Sequoia

Question

Question:

I am trying to mount yakima raptor bike racks to my stock 2006 sequoia roof rack. What adaptors do I need?

asked by: Shane

0

Expert Reply:

In order to install Yakima's Raptor Aero Roof Mounted Bike Carrier Y02093 on your 2006 Toyota Sequoia you will use their Universal MightyMounts # Y03590. These adapters allow the Raptor Aero to fit onto just about any factory roof rack crossbar. I verified this item's fit with my contact at Yakima.

expert reply by: Adam R

0

Answer 1

I checked your order notes and it looks like you bought the #SXBS1 back in March of 2012. The Yakima roof bike racks like the part #Y02115 would fit these crossbars well.

view full answer...

Answer 2

Most likely the answer to your question is yes. The Universal MightyMounts #Y03590 is designed to adapt most Yakima roof carriers to fit nearly all styles of roof rack crossbars. That being said since I do not know which carrier you have I cannot say…

view full answer...

Answer 3

Thank you for coming back to etrailer! Yes. The Yakima MegaWarrior Large Roof Rack Cargo Basket - Steel - 52" Long x 48" Wide #Y07080 will fit on aero/elliptical, round, square and most factory crossbars, so it's a great choice to add…

view full answer...

Answer 4

Yes, the Yakima FrontLoader #Y02103 is compatible with the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. The Rhino-Rack crossbars come with a plastic lock core but you can upgrade…

view full answer...

Answer 5

Since the Rhino Rack bars part #RRVA150B-2 that you referenced are aero in shape the adapter you need is the part #Y8860031 which allows the Hullraiser to fit aero shaped bars.

view full answer...

Answer 6

It depends on your bike mount and brand. Yakima has their Universal Mighty Mounts #Y03590 that should help with most of your Yakima carriers. Thule has their Xadapt series: #Xadapt1 and #Xadapt2 for crossbars that have a t-track in them. If not, they…

view full answer...

Answer 7

Thanks for the purchase and I'm happy to confirm that the Yakima HighRoad Roof Bike Rack #Y02114 is 100 percent compatible with the Rhino-Rack Roof Rack #RRVA126B-2, #RRRLKVA and #DK307 you have on your 2017 Ford Focus hatchback. The HighRoad…

view full answer...

Answer 8

Yes, the Universal MightyMounts for Yakima Roof Mounted Accessories part #Y03590 would replace the Yakima SnapAround Mounting Brackets part #Y8810135 so that you can use your Yakima bike rack with the Rhino-Rack Vortex Aero Crossbars like part…

view full answer...

Answer 9

The adapter to change from a square bar to an aero bar on the High Roller is the Mighty Mount 39H Accessory Adapter part #Y03539. This will fit the original bolt and allow you to attach to your roof rack.

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...