I have a solution for you but the Thule Rapid Traverse foot # 7522249001 you've got mounts to the vehicle with vehicle specific fit kit pieces; it looks like the fit kit is damaged and there is not a fit kit for the 2003 Toyota Matrix since it has raised side rails. The good news is that you can continue to use the Thule Aero style bars you got but you will need different feet.
The feet that are compatible with your aero bars and your Matrix are the Evo Raised Rail Feet for Thule Crossbars... view full answer...
While we do have the parts you need, we do not carry half kits of the Thule system you are looking for. With that being said, you do need a entire two-bar kit. That includes the following:
- Thule SquareBar Evo Crossbars - Steel - 60" Long # TH712500
- Evo Clamp Feet - Qty 4 # TH710501
- Fit Kit for Evo Clamp Feet # TH145182
With these parts, you will be able to use a 2-bar system or the single crossbar that you are looking for. It is important to note that this setup only works with... view full answer...
Assuming you have the gas/hybrid and not the RAV4 Prime plug in hybrid, you'll need the Curt Class III hitch, part # C13416. You'll also need a trailer wiring harness like # C56434, a ball mount and hitch pin like # D-28 and # PC3 and a trailer ball like # 19260 for a 1-7/8 or # 62845 for a 2 inch ball.
According to the owner's manual, your RAV4 Hybrid is capable of towing trailers weighing up to 1750 lbs, so if your loaded trailer weighs less than that, you should be good to go with the... view full answer...
First you will need a receiver like the Draw-Tite Max-Frame Trailer Hitch Receiver # DT55MR. This receiver is rated for up to 675lbs of tongue weight and 4,500lbs of trailer weight with or without a weight distribution hitch. Be sure to not exceed the towing ratings given by Toyota for your Sienna.
For the wiring you will need to start with a Tekonsha T-One Vehicle Wiring Harness # TK69FR which will give you a 4-way flat connector. This 4-way will take care of your brake lights, turn... view full answer...
To install the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR on your 2022 Toyota Tacoma you will need the Plug-and-Play Wiring Harness # RED99FR. This custom harness will connect to the factory brake control connector that is on your Tacoma to eliminate the need to splice into any wiring on your Tacoma.
I recommend using a Mounting Panel # 331-TPSI-002 for your control knob to give the controller a factory appearance. This will allow you to mount the control knob in one of the... view full answer...
I have a solution for you for either way you'd like to mount your awning, so you're in luck!
You can mount a Yakima LockNLoad Platform Rack for Crossbars - Aluminum - 84" Long x 54" Wide # Y05048-39 directly to the crossbars and it would allow you to mount an awning like the Rhino-Rack Batwing Compact Awning - Roof Rack Mount - Bolt On - Passenger's Side - 69 Sq Ft # RR33400. The LockNLoad will give you enough room to carry the awning and also carry your Rota-Pax jug and traction boards,... view full answer...
I recommend using the Curt # C13343 which is a Class III hitch that offers a concealed cross tube for a clean looking installation that keeps the hitch mostly hidden. I really prefer the Curt hitches because of the durable powder coating they have which helps keep your hitch from getting dinged up and rusted over time.
For wiring, I recommend using the Tekonsha T-One Wiring Harness # 118648 since we've found that the Tekonsha converter boxes tend to be a bit more reliable over time. This... view full answer...
The best trailer harness for your 2013 Toyota Prius 4-Door Hatchback is going to be the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118505 you were looking at. This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your trunk, behind the tail lights on both the driver's side and passenger's side. This will provide you with a 4-flat connector to control your accessory lights. I have linked an installation video. view full answer...
The Furrion Chill # FR86PR is indeed the replacement air conditioner you'd want to use. It will allow you to reuse your distribution box and thermostat if the # C-FACR15SA-A01 wiring adapter is used, but doing so will only allow you medium and high fan speeds. To retain the low fan speed option, you'd need to replace the existing Coleman thermostat with the Furrion # FR33PR. view full answer...
When it comes to installing a trailer hitch on your 2006 Toyota Highlander The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch # e98857 is 100% confirmed to fit your vehicle.
The trailer hitch has a matte black powder coat finish that is over a protective base coat that offers a superior rust resistance. The hitch has a bolt-on installation that requires no welding.
The Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236... view full answer...
I did a search for an owner's manual for a 2007 Toyota Tacoma, which has the capacities in it, and so long as the Tacoma has the factory towing package it can tow the nearly 3,900 lb Forest River trailer you mentioned. In order to do that you will need a number of different parts if you don't have them, starting with the hitch:
- etrailer Trailer Hitch Receiver # e98850
If your 2007 Tacoma does not have the factory 7-way, you will need to add wiring, which you can so with the following... view full answer...
No worries! The 2016 Toyota Tacoma and Tundra would both use the same brake controller wiring harness, part # 3031-P. The Prodigy P3 brake controller is an excellent choice, very easy to use. You won't be disappointed. view full answer...
Though all the trailer hitches that we offer for your 2022 Toyota Sienna I recommend The etrailer Trailer Hitch Receiver # e56RR. I like the etrailer hitch over the others because the hitch has a matte black powder coating that will help conceal scratches and scuffs better than the other hitches that we offer. For the wiring harness I recommend The T-One Vehicle Wiring Harness # TK69FR. I like this harness because it has a more reliable converter box that will last longer than the other... view full answer...
The trailer hitch that is going to have the best ground clearance and that will be the most hidden for your 2022 Toyota RAV4 will be the EcoHitch Hidden Trailer Hitch Receiver # EH97FR. The EcoHitch has a completely hidden crosstube with only the 2 inch receiver head showing. The EcoHitch when installed will have a ground clearance of 14 inches. If you ever plan on towing a trailer you will also need a trailer wiring harness as well. I recommend the Curt Vehicle Wiring Harness # C56434.... view full answer...
Out of all the air bags we offer I recommend the Firestone Coil-Rite Air Helper Springs # F4135 for your 2023 Toyota 4Runner. I like the Firestone airbags over the other air bags we carry because they're more durable and are constructed better than the other airbags that we offer. The Firestone springs fit inside the existing coil springs which will help level your Toyota 4Runner. It will also help with improve braking and handling, and also help reduce tire ware.
To make you life easier... view full answer...
For the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 I recommend using the Replacement Load Stops for Thule Aeroblade Load Bars, Ladder Racks, and Thule TracRac CapRac # 753-3761. view full answer...
I recommend going with the Bulldog Winch Rear Wiring Kit # BDW20206 for your 2014 Toyota Tacoma.
This wiring kit is 20' long, is constructed from thick 2 AWG wire so it can be used on heavier capacity winches if need be, and also features a pair of quick connects so you can easily connect the winch to the wiring.
If you're needing a winch tray so you can mount your winch to your vehicle, the Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles # BDW20011 will work with winches... view full answer...
The Curt # C13511 you were looking at is a great choice that will give you a 2 inch receiver that's ideal for towing or carrying a hitch mounted accessory. I really like Curt hitches because of the heavier powder coating they apply, which will stand up a bit better to nicks and scratches; this will be important in prolonging the life of the hitch and keeping it corrosion free.
For the wiring harness I recommend using the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer... view full answer...
Rooftop cargo boxes like the Thule Sidekick # TH78GC require that the vehicle have a roof rack to which they can attach with their included mounting hardware. This cargo box can be used on any other vehicle that has a roof rack as long as that other rack's crossbars are no larger than 3-3/4-inches in diameter and have a center-to-center spread between 23-5/8 and 28-inches.
For a roof rack I recommend the cost-effective Rhino-Rack system consisting of parts # RRVA126B-2, # RRRLKVA, and... view full answer...
Go To Results