Expert Answers about Tesla

• Do I have to Splice Wires on My Tesla Model X Wiring Harness?
• The Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit item # 119250KIT for your 2016 Tesla Model X does not require cutting or splicing wires but it isn't plug and play. It uses zero-contact interface sensors to identify the current flowing through each wire by simply clamping onto it. I have linked a couple of videos so you can see how the system works.
  view full answer...


• Hitch Receiver and Wiring Harness Installation Options for a 2016 Tesla Model X
• Yes, we do have installers in your area. You will want to go to the product page for the Draw-Tite Max-Frame Trailer Hitch Receiver item # 76143, you were looking at, and click on the link below the picture that says "Locate installers near me". You will type in your zip code and find multiple options in your area. I can confirm that the Draw-Tite item # 76143 does fit your 2016 Tesla Model X. It has a maximum gross trailer weight of 5,000 lbs and a maximum tongue weight of 750 lbs. If...
  view full answer...


• Does Draw-Tite Trailer Hitch For 2016 Tesla Model X Hide Under Bumper
• I have added a couple photos showing the Draw-Tite hitch on a Tesla Model X, one that is during the install and the other the completed install. So the body of the hitch is indeed hidden behind the bumper fully, but the receiver will still show and will not be hidden on your 2016 Tesla Model X. The correct part number for the hitch that fits your '16 Model X is the following: - Draw-Tite Max-Frame Trailer Hitch Receiver # 76143
  view full answer...


• Will the EcoHitch for a 2022 Tesla Model Y Trigger Backup Sensors
• In regards to the EcoHitch Invisi Trailer Hitch Receiver part # EH39FR which is a fit for a 2022 Tesla Model Y, the installation won't affect the reverse/backup sensors. That said, the system could be triggered when using a bike rack and placing the vehicle in reverse. This is not just a protentional problem on this vehicle but for many others as well. That said, it's not a guarantee that it will happen. I checked out some of our reviews for this hitch and there were not any reported instances...
  view full answer...


• Does Draw Tite Hitch for 2021 Tesla Model Y Have Nylon Washer to Prevent Corrosion
• The Draw Tite hitch part # DT58MR that you referenced does not have nylon washers that would go between the hitch and the vehicle to prevent galvanic corrosion. EcoHitch actually only recommends using the isolators if you are in the "rust belt" or in an environment that tends to cause vehicles to rust out.
  view full answer...


• Installing Stealth Hitches Rack Receiver on 2020 Tesla Model 3
• The installation of the Stealth Hitches Rack Receiver # 391TES317 on your 2020 Tesla Model 3 is a somewhat involved process, but the good news is that it does not require any type of drilling, or any type of visible modifications so your Tesla is going to completely keep its factory appearance. I have added a link to the installation instructions for you to check out which has all the details of the installation of this hitch on a Tesla Model 3. You will need to remove the bumper beam...
  view full answer...


• Is Cutting a Hole In the Bumper Required for the EcoHitch Stealth Hitch On a 2020 Tesla Model 3
• The EcoHitch Stealth Trailer Hitch Receiver part # EH84GR is an excellent option for a 2020 Tesla Model 3. The newer models has a hitch knockout panel under the rear bumper which is where the receiver tube will exit so no cutting or drilling will be required for this step. The older models did not have this knockout panel which is where the note is from.
  view full answer...


• Is Aftermarket Factory Cover Plate Available for Hitch Installation on 2018 Tesla Model 3
• Since you do not have the removable factory cover plate the only option is to cut the gravel guard and leave the hole there when installing the # 391TES317. This won't really be noticeable or cause any harm to the vehicle. Unfortunately, nobody makes any kind of replacement panel you could use. You might be able to get a shop to rig something up using the piece from cutout but I don't know how effective that would be. The only other option would be to talk to Tesla and swap out the whole...
  view full answer...


• Using Quick Splice Connectors of Stealth Hitch Trailer Wiring for 2019 Tesla Model 3
• Using scotch locks or quick splices to connect two circuits is actually pretty easy. Basically you set the two wires in the channels of the quick splice and then close the flap of the connector and apply pressure so that the blade of the connector pierces just the insulation of the wiring and then creates a connection between the circuits since the blade is conductive. Testing the circuits is pretty easy. What you'll need is a circuit tester like # PTW2993 to prove the wires of the vehicle...
  view full answer...


• Does Bumper Beam Get Reinstalled When Installing etrailer Trailer Hitch on 2023 Tesla Model 3
• You definitely want to reinstall the bumper beam on your 2023 Tesla Model 3 when installing the hitch that fits: - etrailer Trailer Hitch Receiver # e33ZR The hitch does not replace the bumper beam for impact structure so reinstalling it is the safest thing to do.
  view full answer...


• Is Fascia Cutting Required When Installing EcoHitch Trailer Hitch on 2020 Tesla Model 3
• This is a great question. On your new 2020 Tesla Model 3, there is indeed a factory cutout/panel already present on the fascia that allows fitment for the drop-down receiver on the EcoHitch Stealth Trailer Hitch Receiver # 306-X7373. This means you won't have to cut the fascia during installation or be left with an exposed area when the receiver is removed, as this factory panel can be snapped back into place. On older models of the Model 3 this portion did need to be cut, but starting...
  view full answer...


• How To Install Tekonsha 119250KIT on 2016 Tesla Model X
• Installing a wiring harness like the Tekonsha # 119190KIT is not going to be a vehicle specific process; the biggest challenge is going to be finding the correct wires on your vehicle. In most cases the wires you're looking for are going to be located behind the tail lights on your vehicle- on a Tesla you can access the wiring through the vehicle's trunk, by removing some trim and pulling back carpet to access the wires. You will need to have someone in the vehicle activating the brake...
  view full answer...


• What Position Should Handle be When Installing Receiver of Stealth Hitch For 2019 Tesla Model 3
• When installing the receiver of the Stealth Hitches Hidden Rack Receiver # 391TES317 in your 2019 Tesla Model 3, the handle should be turned clockwise so the longer portion is facing towards the front of the vehicle. That can be a bit difficult to explain without seeing, so I've added a cut out for you below so you can see how the handle should be of the Stealth Hitches Hidden Rack Receiver # 391TES317. The button is part of the latching mechanism; it is a visual indicator that will go...
  view full answer...


• Is the Hollywood Racks Trail Rider Bike Rack Secure From Theft
• The Hollywood Racks Trail Rider Bike Rack for 2 Bikes # HR200Z does come with bike and rack locks so it will keep opportunistic thieves honest, yes. It's important to note that given enough time, talent, and resources any lock can be beat though so if someone comes prepared to break the locks on the bike then this isn't a 100% guarantee. If you live in (or plan on visiting) a place that makes you a little nervous, then adding a cable lock like part # e98891 can help give more visuals...
  view full answer...


• Can Hole in Bumper Fascia from Installing EcoHitch Be Covered on 2021 Tesla Model 3
• The EcoHitch # EH84GR is indeed a fit for the 2021 Tesla Model 3, it'll work great for you. When the removable receiver is detached, the hole in the underside of the bumper fascia can indeed be covered using part # 306-XA2002. I've provided a photo showing the # 306-XA2002 cover installed. I've linked to install videos for both the hitch and the # 306-XA2002 cover.
  view full answer...


• Do You Need to Cut Bumper on 2020 Tesla Model 3 for EcoHitch Receiver
• On previous models of the Tesla model 3, which the EcoHitch Stealth Trailer Hitch # EH84GR was also confirmed to fit, it was indeed a requirement that a section of the bumper fascia be cut to allow space for the drop-down receiver. A separate piece would then be recommended to cover this opening when the hitch wasn't in use to avoid exposure to the elements. The good news though is that with your 2020 Model 3, Tesla has made this process much simpler by adding a factory panel right where...
  view full answer...


• Installing EcoHitch Stealth Receiver on 2020 Tesla Model 3
• On your 2020 Tesla Model 3 you actually won't have to cut any fascia when installing the EcoHitch Stealth Trailer Hitch Receiver # EH84GR. Up through the 2018 model year, a square opening did need to be cut on the Tesla Model 3 to allow clearance for the drop-down receiver on the EcoHitch, however starting with the 2019 model Tesla added an integrated panel that can be easily taken off (and snapped back on) that provides the needed opening for the receiver. This allows for an easier install...
  view full answer...


• Installing EcoHitch Stealth Receiver # EH84GR on 2018 Tesla Model 3
• I see exactly what you are referring to with regards to the plates that need to be removed on the Tesla Model 3 when installing the EcoHitch # EH84GR. There is no need to worry though about rust or corrosion in that area because the mounting brackets for the hitch will essentially be taking their place. Using the included nylon washers and bolts the hitch brackets will create a tight seal at that location to prevent anything from creeping in between them and the frame. Once the hitch is...
  view full answer...


• Installation Instructions for Draw Tite Hitch for 2016 Tesla Model X
• On this page I have linked the install instructions for the Draw Tite hitch part # 76143 which is a confirmed fit for your 2016 Tesla Model X. The instructions are very detailed! Look for the section labelled "Featured Help Information".
  view full answer...


• Recommendation for Having a Trailer Hitch Installed on a 2017 Tesla Model X
• Typically a trailer hitch can be installed by anyone who is comfortable with working on vehicles, but considering the Draw-Tite Max-Frame Trailer Hitch Receiver # 76143 has been rated as a 10 for difficulty I would recommend that you be pretty mechanically inclined. If you have a trusted shop near Seattle then they should have no problem with the installation as they have more equipment than the average guy installing a trailer hitch. I have linked the installation instructions for this...
  view full answer...