Installing Stealth Hitches Rack Receiver on 2020 Tesla Model 3

Question

Question:

Would you tell me about installing the Stealth Hitch in a 2020 Tesla Model 3. I'm not sure if this is something I can do myself or if I should take it to an installer.

asked by: Vince E

0

Expert Reply:

The installation of the Stealth Hitches Rack Receiver # 391TES317 on your 2020 Tesla Model 3 is a somewhat involved process, but the good news is that it does not require any type of drilling, or any type of visible modifications so your Tesla is going to completely keep its factory appearance.

I have added a link to the installation instructions for you to check out which has all the details of the installation of this hitch on a Tesla Model 3. You will need to remove the bumper beam for the installation, which is the most extensive part. Installing the hitch is a project that some people do by themselves, but not everyone is comfortable with it so they do take it to a local mechanic to install. If you take a good look at the directions you will be able to make an informed decision about doing the installation by yourself or hiring someone to do it.

expert reply by: Kyle S

0

Answer 1

Hey great question, lets clear up the water so we can see. I have a solution for you linked below: **Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit - Custom Fit - 2" #391TES317T. The EcoHitch Stealth hitch you are referring too is…

view full answer...

Answer 2

The difference in weight between the EcoHitch #306-X7373 and Stealth Hitch #391TES317 is going to be negligible, as both weigh around 45-lbs. If you're planning on towing and go the Stealth Hitch route, you'll need the #391TES317T instead of…

view full answer...

Answer 3

Stealth Hitch offers two hitch fits for the 2021 Tesla Model 3, the #391TES317 and the #391TES317T. Both hitches are identical, the difference is what's included with each hitch. The #391TES317 features a removable receiver that's intended as…

view full answer...

Answer 4

We have three hitches for your Tesla that are totally hidden when not in use. You can check these out: Stealth Hitches Hidden Rack Receiver - Custom Fit - 2" Part #391TES317 Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit - Custom…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 11

What that means is that the cross section of the hitch that runs side to side is completely out of sight once it's installed onto the vehicle. The hitch you looked at, part #C13065, has a hidden cross tube that you can't see with it…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Installing Stealth Hitches Rack Receiver on 2020 Tesla Model 3

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching