I checked with our vendors and there is one solution that will set your 2018 Nissan Titan XD up with both a gooseneck hitch and a compatible sliding 5th wheel hitch. To add a gooseneck hitch you'll need the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit item # BWGNRK1217. This system installs with custom fit brackets and has a 30,000 lbs capacity.
The best part about B&W's Turnoverball system item # BWGNRK1217 is that when you are not towing you can flip... view full answer...
To add a set of crossbars to the raised side rails on your 2023 Nissan Pathfinder's roof, I recommend the roof rack by Rhino-Rack which includes the following parts:
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2 item # RRVA126B-2
Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Raised Factory Side Rails - Qty 4 item # RRSX100
This aero bar roof rack system has a 165 lbs capacity. The included locks will help to prevent theft and the rubberized vortex strips... view full answer...
For maximum versatility you're going to want to go with a class III hitch that has a 2" receiver. I recommend the etrailer Hitch item # e93ZR. This hitch is custom fit for your 2022 Nissan Rogue and installs with included hardware. There are so many more options if you have a 2" receiver over a 1-1/4" one.
All of the hitches for the 2022 Rogue are practically identical visually and size wise. You would be paying more for a class II 1-1/4" hitch item # C57HR and have to deal with compatibility... view full answer...
I checked with Curt and our other vendors and the harness the relays are attached to in the Curt Vehicle Wiring Harness item # C56225 is not available to be purchased separately. You can purchase the relays separately for the 2022 Nissan Frontier with the Curt Relay Kit for Nissan Aftermarket Tow Package item # C57000.
I have linked an installation video below to help you get this set up. view full answer...
The best hitch for your 2021 Nissan Rogue SL is going to be the etrailer Hitch item # e93ZR. This is a class III hitch with a 2" receiver and it is definitely compatible with your Thule Helium Pro Bike Rack item # TH9043PRO.
I have linked an installation video below so you can see the set up process and what it'll look like once installed. view full answer...
Yes, we do. For a 2023 Nissan Rogue you will want the Curt T-Connector Vehicle Wiring Harness item # C44ER. This is a plug in harness that will provide you with a 4-way connector.
If you are planning on towing you will also need a ball mount kit item # C45534. view full answer...
Your ebikes weight is one of the limiting factors in carrying them on the roof of your vehicle. The Yakima ForkLift Roof Mounted Bike Carrier - Fork Mount, part # Y02098, has a weight limit of 40lbs. But if your roof rack has crossbars with a channel my recommendation would be the Inno Fork Lock Roof Bike Rack - Fork Mount - Channel Mounted - Aluminum, part # INXA391.
It is a fork mounted rack that attaches to the channel of your crossbars. It has a weight limit of 50lbs and locks your... view full answer...
The link didn't work but based on your description and the parts available for a 2023 Nissan Frontier I have listed the parts you will need below and added a couple of recommendations as well. I have also linked a couple of installation videos.
Draw-Tite Trailer Hitch Receiver item # 75282
T-One Vehicle Wiring Harness with 7-Way Trailer Connector item # 118266
Mounting Bracket and Installation Hardware item # PK12711U
Pollak 7 Pole to 4 Way Connector Adapter item # PK12716
You are... view full answer...
For your 2022 Nissan Rogue you are going to want the Draw-Tite Max-Frame Trailer Hitch Receiver item # DT85MR. This hitch is custom fit and bolts directly to your Nissan's frame with included hardware.
If you are need of a wiring harness to control your trailer's lighting functions I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # TK76FR.
To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534.... view full answer...
Having a leveling kit on the front and rear of your vehicle will not change your towing capacities. It will impact the ride of your truck, but the towing capacity will not be impacted as that has to do with the engine and transmission as well as other things that the leveling kit doesn't impact.
The manufacturer will list your towing capacities in your owner's manual, so even if a hitch receiver like the # 75282 you referred to is rated higher than the owner's manual the maximum towing... view full answer...
Yes, I was able to find your account and found that you purchased the Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum # EM07705. This ladder rack has a maximum weight capacity of 800lbs. view full answer...
For a sidewind A-frame trailer jack with at least 7 inches of retracted height use the Round A-Frame Trailer Jack # TJA-2000S-B.
This measures 9-1/4" below the A-frame plate (which is the retracted height), and the only other thing you will need is a foot plate, part # JF-101BK. view full answer...
I went out to our studios and found a Rapid Traverse foot from a # TH480R kit and measured from the base to the bottom of where the bar would be. It was just under 3-1/4 inches. Because roofs are generally sloped and fit is different on every vehicle, use this measurement as a guide only to estimate where the bottom of the bar will approximately be.
In addition to the foot pack you will also need the crossbars, # TH711420 in black or # TH711400 in silver, and fit kit # THKIT1538. view full answer...
I checked the owners manual online for the 2014 Nissan Rogue and found that it has an 1,100 pound towing capacity. However, it also says to check the capacity sticker in the driver side door jamb. I recommend checking both the manual and that sticker to determine the capacities of your specific model.
If it does indeed top out at 1,100 pound you will not be able to tow the 2500 pound boat. view full answer...
The Swagman Original 4 Bike Towing Rack, part # S64675 weighs 38 pounds out of its packaging.
Remember when using a hanging rack if you carry any women's, children's or alternative frame bike you will need to use an adapter bar like part # 64005 to ensure that they ride level to the ground. view full answer...
Yes, the Yakima BedRock HD Truck Bed Rack item # Y01160-58 is the complete set but it is just a set of crossbars that go over the bed of your 2023 Nissan Frontier. These attach directly to your bed sides with included adjustable locking clamps. They fit the Frontier's without the utili-track system.
There are no towers because this isn't a ladder rack even though it is categorized under that section. There are only two options for ladder racks that fit without the utili-track system and... view full answer...
There are a couple of reasons why you cannot slide a slider hitch back when using a Sidewinder. First, if you were to do so, you would have to remove the tailgate on the truck because there is no room otherwise. There may not even be enough room with the just a slider and not using a Sidewinder at all.
The second issue is stress. The hitch is set up to have the center of the trailer king pin, or the Sidewinder king pin, over the center or slightly forward of the rear truck axle. Using... view full answer...
The 1,000lb rating for the Blue SumoSprings Solo Custom Helper Springs # SSR-210-40 is for the pair of springs at 50% compression.
The 1,500lb rating for the Black SumoSprings Solo Custom Helper Springs # SSR-210-47 is for the pair of springs at 50% compression. view full answer...
I went out to the warehouse and the thickness of the rough opening in the roof for installing this vent can be from 1-7/8 inches to 3 inches. view full answer...
The Jack Handle # ORJW750SH on the Removable Xtreme Off-Road Swing-Up Trailer Jack # ARK57FR is 6-1/2" long from the center of the handle to the center of the magnetic mount for connecting to the jack. view full answer...
Go To Results