The SumoSprings Solo Custom Helper Springs for a 2023 Nissan Frontier, part # SS46EV for a 1,800 lb capacity and part # SS96EV for a 1,400 lb capacity, measure 4" tall and they come with a 1/2" spacer. You'll want to shoot for about a 1" gap between the jounce spring and leaf springs. If you don't want them to engage as much you can omit the spacer.
Please note, the capacity of the spring correlates to tongue weight and or payload, the closer the capacity of the load to the spring, the... view full answer...
I took a look at the online owner's manual for your 2008 Nissan Frontier and it stated that you can use your bumper hitch and a hitch ball to tow up to 3,500 lbs. So as long as your trailer's total capacity is under that you can tow with your Frontier.
You will also need a 4-way to connect your trailer's lights if you do not already have one. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56225 will be exactly what you need and I've also added a link... view full answer...
Yes, there are. To add a front mount hitch to your 2019 Nissan Frontier you're going to want the Curt item # 31241. This front mount hitch has a 2" receiver and bolts to your Frontier with included hardware. This hitch has a line pull capacity of 9,000 lbs, a vertical load limit of 350 lbs, and it can pull a trailer weighing up to 3,500 lbs.
I really like this hitch because it mounts directly below the front fascia. I have linked an installation video below along with a couple of pictures... view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver # 75282 will have the following bolt hole dimensions for your 2015 Nissan Frontier.
The Bolt holes from drivers side to passenger side frame rails are 43-5/8" on center. The holes running from front of the hitch to back are spaced 3-1/2" on center. I have included the picture with measurements for you to reference. view full answer...
In regards to the Draw-Tite Front Mount Trailer Hitch Receiver part # 65075 which is a fit for a 2016 Nissan Frontier, the distance from the ground to the bottom of the receiver tube opening is around 9-1/2" but this can vary for each application due to tire size, suspension, and load variances. view full answer...
I spoke with my contact at Roadmaster and the ring on the Stowmaster tow bar, # RM-581, has an inner diameter of 2.5 inches and an outer diameter of 4.5 inches. I have included a picture showing these measurements. view full answer...
I reached out to my contact at Camco and she stated that the RV Heated Drinking Water Hose # CAM22903 is rated for 40-50 psi of water pressure. The 50 foot long hose also comes with a 3 year warranty for the electrical components and a 1 year warranty for the hose itself. view full answer...
When installed, the top of the cover itself sits right about flush with the top of the bed sides, but because of the bracing and hinges on the underside of the cover, it will extend down almost 3 inches from the top of the bed sides, according to BAK. I guess the easiest way to determine if your cooler would fit would be to place it in the truck bed, then find a straight piece of lumber, angle iron, etc across the bed sides. Then measure downward to the top of the cooler. If the distance... view full answer...
When selecting a ball mount and 2-inch hitch ball for towing your pop-up camper you will want to choose a ball mount that allows the hitched trailer to remain level. The article I linked for you shows how to choose the right 2-inch ball mount with the correct rise or drop to keep your trailer level. Level trailers tow much better.
I linked our page for 2-inch ball mounts, some of which include the hitch ball, such as Curt # C45036 which offers 2-inches of drop. If you choose a separate... view full answer...
I recommend using the Everchill Frost Free Double Door RV Refrigerator # 324-000119 you were looking at. This unit has dimensions of 23-1/2" Wide x 24-3/4" Deep x 59-5/8" Tall and will be the closest match available compared to the size of refrigerator your trailer currently has. This fridge/freezer combo offers 10 cu/ft of food storage space and does not require a vent.
I've linked one of our helpful review videos on this refrigerator that you may want to have a look at, as well. view full answer...
Since you already have the Roadmaster Nighthawk All-Terrain Tow Bar item # RM-676 you will need the Roadmaster Direct-Connect Base Plate Kit item # RM-344-3B to flat tow your 2006 Nissan Frontier.
Here are some other parts you will need to flat tow your 2006 Frontier:
Wiring - Roadmaster Universal Hy-Power Diode Wiring Kit item # RM-152
RoadMaster 6-Wire Trailer Connector - item # RM-910030-7
Roadmaster Bent Electrical Socket Bracket item # RM-910030-5
Supplemental Braking System -... view full answer...
I would be happy to! To add a hitch to your 2024 Nissan Frontier, I recommend the etrailer item # e98869. This hitch is custom fit and bolts to your Nissan with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight, which can be increased to 8,000 lbs and 800 lbs when used with a weight distribution system.
I really like the etrailer hitch item # e98869 because the crosstube mounts behind your rear bumper... view full answer...
I had our warehouse measure the RV Hand Pump Water Faucet # 37297025 you referenced and from the bottom of the of the chrome mounting plate to the highest part of the unit is 6".
I included a diagram of this measurement for you to take a look at. view full answer...
The diameter of the hitch pin hole for the Curt # 13241 trailer hitch receiver is 5/8 of an inch.
A Pin and Clip, like part # C21500, is designed to fit into the hitch pin hole. You can use part # e98882 for an option that locks. view full answer...
I checked with our vendors and the only option to purchase the relay you need for your 2022 Nissan Frontier is to get the Curt T-Connector Vehicle Wiring Harness item # C56225. This includes the necessary relays that Nissan leaves out when building their trucks. However, it does also include the wiring harness. We don't sell the relays separately and I wasn't able to find them online without the harness unless you go through a Nissan dealer.
I have linked an installation video below to... view full answer...
If I'm understanding you correctly, you're wanting to know whether or not the tailgate can be let down with bikes still on the Thule T1 9041 . Since this is not a tilt away platform, you will likely be unable to lower the tailgate without contacting both the handlebars or the frame of the bike. If you wanted to still access the rear of your truck bed via the tailgate, I recommend going with a tilt-away platform rack like the RockyMounts MonoRail # RKY10007.
This rack tilts away to allow... view full answer...
The maximum psi rating for a wheel (or rim) is based on the valve stem and the tire rather than the wheel itself. The wheel will have a load capacity but is not restricted by the psi. So, you can choose a wheel with the bolt pattern you desire and then choose a tire and valve stem compatible with the tire load rating at whatever psi. The load capacity at that psi is the max psi of the tire as it is always supposed to be run at its max psi when inflated prior to a trip (cold).
For... view full answer...
The canister for the RetraxONE MX Hard Tonneau Cover # RTX98QR is approximately 11" tall so you would need to measure down from the top of your bedrails down 11" to see just how much room is left in the bed of your 2022 Nissan Frontier. view full answer...