Both the # C94WR and the # e38KR will fit your 2022 Tucson Hybrid. The hitches are identical with the exception of the finish so I would let that be the deciding factor. The Curt has a glossy finish and the etrailer hitch has a matte black powder coat finish. Personally I prefer the matte black since that gives it an OEM look and does a better job hiding dirt and dings.
If you plan on towing, you will also want the # CU94FR for wiring. This will give you a 4-way to power your trailer's... view full answer...
I took a look at your 2020 Hyundai Tucson Limited and it has two exhaust tips on the passenger side which will work fine with the Curt Hitch # C13240 as that's considered single exhaust by the manufacturer.
The night edition has dual exhaust tips, one on each side of the car which causes the problems with the hitch fitting, and is the only fit exclusion. view full answer...
There are two trailer hitches that will fit your 2023 Hyundai Palisade XRT, the Curt and etrailer:
- etrailer Trailer Hitch Receiver # e95ZR
- Curt Trailer Hitch Receiver # C13427
I went through our customer reviews for you and found a photo that a very nice individual sent us which shows the hitch on the '23 XRT (the XRT can be a little hard to make out which is why I used the arrow). The etrailer and Curt hitches are the same except for the etrailer hitch has a matte black finish compared... view full answer...
It sure will!
The Curt Trailer hitch # C13240 you purchased from us last year fits 2016 - 2021 Hyundai Tucson's with the only sub model not working being the night edition due to the dual exhaust so you won't have any problems moving your hitch between the vehicles.
With that said you'll want to pick up the replacement hardware # RHK because the hardware is torque to yield meaning it stretches once torqued so it's not reusable. view full answer...
I'm not sure what you mean by 'stop bump', but I can explain a quick measurement you can take to ensure that the Hollywood Racks # HLY84FR SE2 bike rack is compatible with your vehicle.
You'll want to have a helper hold a straight edge like a length of 2x4 or a yardstick up against your rear bumper at a 90ยบ angle to the ground and measure the distance between that and the center of the hitch pin hole. In case I've done a poor job explaining that, I'll link to an article that explains it... view full answer...
According to my research, your 2001 Airstream Land Yacht 30 is on a P-30 Workhorse Chassis. If this is the case then I do have an option for you but SuperSprings does not offer a set SumoSprings Solo Custom Helper Springs that will work on the front axle. Instead, we have the Timbren Front Suspension Enhancement System part # TGMFP30W which are very similar to the SumoSprings Solo Custom Helper Springs in that they will work to reduce sway and body roll. The main difference between the... view full answer...
There are bike racks that will work with either the Draw-Tite Trailer Hitch # 24963 or Curt Trailer Hitch # C11486 that fit your 2019 Hyundai Ioniq (non-electric), but the Thule Helium Pro 2 9042PRO very likely will not.
The issue, as noted, is the bumper clearance with this rack. When we installed the Curt hitch on an '18 Ioniq we found it was about 5 inches from the hitch pin hole to the edge of the bumper; since the Draw-Tite installs the same the bumper clearance required will be... view full answer...
There is one trailer hitch receiver that will fit your 2022 Hyundai Kona Electric, which is from Draw-Tite:
- Draw-Tite Trailer Hitch Receiver # DT52GR
I verified for you with the manufacturer that the # DT52GR will indeed fit the Electric version of your '22 Kona, so this is exactly what you will need to carry a bike rack.
Then you could add a bike rack such as the Thule Apex XT 2-Bike Rack # TH9024XT or Saris Bones 2-Bike Rack # SA882. view full answer...
We do have a roof rack for your 2022 Hyundai Ioniq 5. Thule has a roof rack system that works and I recommend using their WingBar Evo crossbars so you'll need the following parts:
53" WingBar Evo Crossbars - Black # TH711420 or Silver # TH711400
Evo Clamp Feet - # TH710501
Fit Kit - # TH68UK
Lock Core Kit - # TH450400 (optional)
I really like the WingBar Evo kit because it looks really sleek, is great quality, easy to install, and it uses dual rubber strips at the top which make mounting... view full answer...
The Rola Sport Series Roof Rack with REX Mounting System 59766 hasn't been confirmed to fit a Hyundai Santa Fe since the 2018 model year, but we still have a roof rack that will work with your 2020 Santa Fe with the flush mounted rails.
What you need is the Thule roof rack system. This has a weight rating of 130 lbs and you'll use the following parts:
47" WingBar Evo - Black # TH711220 or Silver # TH711200
Rapid Podium Feet - # TH460R
Fit Kit - # THKIT4093
Lock Core Set - # TH450400... view full answer...
The 2020 Hyundai Palisade Limited does not come standard with a trailer hitch receiver, that is something that is an option - and an expensive one at that. To add a trailer hitch to your 2020 Palisade you will save yourself a big expense with an aftermarket trailer hitch, the Curt Trailer Hitch Receiver # C13427, which I confirmed with the manufacturer does fit your vehicle.
This hitch is a bolt-on installation so no drilling is needed; this is something that most people are comfortable... view full answer...
Yes, the Rhino-Rack Ski and Snowboard Carrier part # RR576 will work with euro shaped crossbars without any additional accessories so long as they do not exceed more than 3-3/4" wide. Therefore, the Rhino-Rack Ski and Snowboard Carrier should work just fine on a 2013 Hyundai Santa Fe. view full answer...
The towing capacity I'm seeing for a 2020 Hyundai Elantra is only showing up as 750lbs, but this can possibly differ with your specific model so you'll want to doublecheck your owner's manual. 750lbs isn't likely going to be enough to really tow a trailer so you can try to haul items for your business using a cargo carrier and/or a roof rack roof basket or box.
If you don't have a trailer hitch then you can use the Draw-Tite Sportframe Trailer Hitch Receiver # 24939. This has a 1-1/4"... view full answer...
The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # C68JR does fit the 2023 Hyundai Santa Fe.
The reason we have it in our fit guide but Curt does not is because one of our installers put this on a Santa Fe so they directly tested it, which is where our info comes from. view full answer...
Yes the Curt Trailer Hitch Receiver # C94WR will fit your 2022 Hyundai Tucson PHEV Limited. It has been confirmed by Curt to fit all trims of the 2022 Tucson and we also have reviews on our site from installations on the PHEV.
I do recommend installing the Curt T-Connector Vehicle Wiring Harness # CU94FR when you install the receiver. This will give you a 4-way flat connector that will fit most small trailers as well as Auxiliary Lights # C53201. The auxiliary lights are needed if you... view full answer...
It does! I verified for you that the Rhino-Rack roof rack does fit your 2018 Hyundai Santa Fe Sport with a bare roof. The correct parts are the following:
- Rhino-Rack Vortex Aero Crossbars # RRVA137B-2
- Rhino-Rack 2500 Series Legs # RRRLKVA
- Custom DK Fit Kit # DK360
You made a really smart choice going with Rhino-Rack for your '18 Santa Fe Sport because it is the best overall value for a roof rack; Rhino-Rack's quality is equal to similar brands, but at a better price point because... view full answer...
I do have a solution for you. It will allow you to use your old Thule crossbars on your 2016 Hyundai Sonata. Your roof rack will consist of the following items:
Inno Square Crossbars - Steel - Black - 50" Long - Qty 2, part # INB127
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4, part INSUT
Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet, part # INK602
This roof rack will have a maximum weight limit of 120 lbs. Unfortunately, the new Thule feet do not work... view full answer...
The roof rack I recommend for your 2011 Hyundai Elantra Touring is the Inno Roof Rack with Square Crosbars # INB107 and Foot Pack # INFR. This economically priced roof rack clamps to your vehicle's elevated, OEM side rails. The square, steel crossbars can accommodate a variety of accessories including cargo baskets.
Then, Yakima makes some very nice cargo boxes like the Yakima SkyBox Rooftop Cargo Box # Y07336. This box has 18 cu ft of carrying space. The maximum crossbar spread the Yakima... view full answer...
The claws in your picture look similar to the Replacement Large Claw Assembly for Yakima Railgrab item # Y80144. I have attached a graph showing what type of Yakima claws fit what kind of roof rack to assist you in matching up your rails to the correct claws. I have linked our selection of replacement claws.
Yakima also makes a roof rack system for your 2019 Hyundai Sante Fe the roof rack Includes:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 Item # Y00425
BaseLine... view full answer...
Go To Results