I checked with the roof rack manufacturers and was able to find a roof rack that is a confirmed fit for your 2014 Hyundai Veloster, which is from Yakima and consists of the following parts:
- Yakima JetStream Crossbars Black # Y00425
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06180
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06127
This roof rack has aerodynamic bars which are low profile, giving the rack a... view full answer...
The Curt Trailer Hitch Receiver # C11254 that fits your 2014 Hyundai Veloster is also a fit for the 2016 Veloster so you're good to go! Just be sure to pick up new hardware as hitch hardware is designed to only be torqued down once. To replace your hardware you need the part # RHK where you'll enter your hitch info and we'll send you out a hardware kit!
Attached is an installation video for you to check out. view full answer...
With a Class l hitch on your 2012 Hyundai Veloster, you are limited with the tongue weight capacity and any bike carrier you install in the hitch limits you to 2 bikes. You will want to check your owner's manual or with your dealership to make certain you do not exceed the vehicle's tongue weight capacity.
The Saris Freedom 4 Bike Platform Rack, part # SA4414B, is rated to be used with higher rated hitches and would not be a fit for your Veloster.
You will want to make sure any accessory... view full answer...
There is only one option for a roof rack for the 2019 Hyundai Veloster, but it's a great option; have a look at the SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long - Black # 298-SX6000B. This is an easy to install and remove roof rack system that mounts to your vehicle using suction cups that won't damage the vehicle, and it's compatible with most kayak carriers.
For the kayak carrier, I recommend the etrailer J-Style Kayak Carrier - Folding - Universal Mount # e98878, which... view full answer...
I spoke with Curt and they said they have not yet had a 2017 Hyundai Veloster in to test the Curt Trailer Hitch Receiver part # C11254 which is why they do not list this as a fit. However, we have had a customer (see below) who installed this on their 2017 model and confirmed it was in fact a fit. view full answer...
You are correct that the short curved roof line on your 2013 Hyundai Veloster poses a challenge to fitting both roof racks and some roof-mount accessories such as your Yakima Bowdown and Thule Hull-a-Port kayak carriers, as well as other items such as cargo boxes. Also, operation of the rear hatch and optional glass sun roof may be interfered with by either a roof rack itself or by certain accessory items installed on it.
I suggest that your first step be a confirmation with your local... view full answer...
At this time there is not a fit confirmed for 2018 or 2019 Hyundai Veloster models from any of our manufacturers. Unfortunately I cannot view an owners manual to confirm if this is because it is not able to be towed or because it simply has not been fitted yet. I reached out to my contact at RoadMaster and they have not had either model year in to check fit. view full answer...
Yes, Curt trailer hitch # C11254 will also fit your 2014 Hyundai Veloster turbo model. I have linked a video showing an example installation for you.
If you want to tow with the hitch then the correct ball mount is # C45521. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring you can use # C56153.
If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class... view full answer...
To flat tow your 2017 Hyundai Veloster you would need a tow bar, base plate, tow bar wiring, braking system, and safety cables. You'll also need to refer to your owner's manual to ensure that your vehicle is able to be flat towed and follow any preparation steps it has listed to safely tow your vehicle. I have the following recommendations for you below:
Tow Bar: etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates - 2" RV Mount - 6K # e44ZR. This tow bar features... view full answer...
Yakima would be the final authority on the correct components to install one of their roof racks on your 2016 Hyundai Veloster. I checked with them just now and the correct Base Clips would be the part # Y06127 and # Y06180.
The other components you'd need would be the Yakima JetStream crossbars part # Y00425 and Baseline Towers part # Y28TR. view full answer...
Edge products has confirmed for us the fit of the Edge Insight CTS2 Comprehensive Gauge Display # EP84130 on your 2015 Hyundai Veloster R-Spec. This will allow to view various engine parameters including the boost pressure that the turbo is creating.
These types of monitors are great for allowing you to keep an eye on what the vehicle is doing at all times. This is especially helpful for if you are planning on doing any type of racing with the vehicle or making any modifications. view full answer...
Great news! The Curt Trailer Hitch # C11254 is a confirmed fit for all models of the Veloster including your automatic with more of the rectangular exhaust.
We just had the opportunity to video a different model Veloster than yours here at our studio. The installation will be the same just the design of the exhaust will look slightly different. I've linked an image of the photo Curt uses in their instructions which is the exhaust I believe you are referring to.
It's important to note... view full answer...
Rightline Gear Sport Jr. Rooftop Cargo Bag # RL100S50 can still mount to the roof of your 2013 Hyundai Veloster. On the driver's side both straps would have to run through the one door opening with the rear one as far back as you can get it.
But what I would do is use the car clips, # RL100600, to avoid having the straps run through the interior of the vehicle. I also recommend protective pad # RL100650 which will prevent the bag from sliding while also protecting the vehicle roof.
Speaking... view full answer...
If the Blue Ox Tow Bar you have mounts on the motorhome then yes you should be able to use it with the Roadmaster EZ2 Base Plate Kit part # 521633-1 but an adapter will be needed. If you can let me know which towbar you have then I would be glad to see if we have the correct adapter for you. If the Blue Ox Tow Bar you have mounts on the vehicle then no you cannot use it with the Roadmaster EZ2 Base Plate Kit.
With that being said, we do offer the Blue Ox Base Plate Kit part # BX2334 which... view full answer...
The 2-bike trunk-mount carrier you referenced, the Thule Passage # TH910XT, is not a good fit for vehicles like your Veloster that have a rear spoiler at roof level. That spoiler prohibits the use of a traditional trunk rack.
You have two ways that you can still carry bikes on your Veloster. First, you could use the suction-cup type carriers # 298-BK1910-AB but this only carries one bike and is quite costly.
Therefore, my recommendation for you is to install a Curt hitch # C11254 which... view full answer...
No the straps on the Yakima FullBack 2 Bike Rack # Y02634 will not damage the stock spoiler on your 2020 Hyundai Veloster.
The FullBack also includes a dial with vehicle-specific installation settings so you'll just need to turn the dial to the number specified for your vehicle and place the rack on your trunk or hatch. view full answer...
Curt has told us that their hitch part # C11254 fits all models of the 2016 Hyundai Veloster so it would work on the Turbo Rally Edition as well. view full answer...
The Hatch Huggers for Saris Trunk Mount Bike Racks part # SA3035 are required when using the Saris Bike Porter 2 Bike Rack part SA312B on your 2016 Hyundai Veloster because it has a glass hinge line and the hooks included with the Porter 2 could potentially cause damage to the glass. The Hatch Huggers are made of foam so you will not need to worry about damage to your glass hinge.
I have attached a review video of the Hatch Huggers to give you a better ideal of how they work. view full answer...
The Curt Trailer Hitch Receiver # C11550 is designed for a 2019-2021 Hyundai Veloster unless it is the N model. Since Hyundai is only making the N model starting with the 2022 model year we still have yet to see a hitch designed to fit this vehicle, but I could see it potentially happening if the demand is high enough.
To transport something with your 2022 Veloster N you either need a hitch that is fabricated to fit your vehicle or you can use a roof rack. I recommend going with the Yakima... view full answer...
I reached out to Malone and the minimum crossbar spread of their Pilot TC roof bike rack, part # MPG2103, is 24 inches.
They also stated that using the Pilot on a spread of 23.62 inches wouldn't be an issue since it's so close. view full answer...