Using the etrailer Hitch Mounted Spare Tire Carrier # e98ZR with a Saris Swing Away Hitch Extender # SAR36VR will be the easiest way to access the rear hatch on your 2021 Hyundai Palisade. This setup will require you to swing open the carrier when you access the rear hatch. And if you will be towing the carrier and swing base would need to be removed to tow.
To still be able to tow a trailer with your spare tire attached the Roadmaster Hitch Mounted Spare Tire Carrier # RM-195225 will... view full answer...
Yes, the Curt Echo # C51180 will continue to operate under the last settings that were programed. This is intended as a safety device incase you were to have your phone battery die or lost connection.
You will still be able to access the Echo App on your phone when connected to Apple Carplay. The same is true for Android Auto. view full answer...
Yes, the trailer hitches we offer are compatible with your 2023 Hyundai Palisade XRT.
Attached is a photo another customer sent in of the etrailer Trailer Hitch Receiver # e95ZR installed on their 2023 Hyundai Palisade XRT for you to reference. view full answer...
I would be happy to help you. Both the Curt hitch item # C13427 and the etrailer item # e95ZR are identical hitches except for the powder coat. They each weigh 34 lbs and are confirmed to fit a 2022 Hyundai Palisade. They each have a 5,000 lbs towing capacity and a 750 lbs tongue weight.
Out of these two hitches, I recommend the etrailer item # e95ZR. This hitch has a matte powder coated finish that blends in nicely when installed. The finish also provides great rust protection. view full answer...
The etrailer Trailer Hitch # e95ZR and Curt Wiring # CU94FR are a great start to a towing setup for your 2020 Hyundai Palisade.
When we installed the hitch on a 2020 Palisade we found the hitch height (from the ground to the top inside of the receiver) to measure 13-1/4". Standard trailer couplers will sit somewhere between 16" - 18" but since you're looking at also towing a hydraulic splitter your best bet would be to get an adjustable ball mount so you can make sure you get the correct... view full answer...
We do have the Curt Trailer Hitch Receiver # C13427 which is confirmed to fit your 2023 Hyundai Palisade. For the wiring you will need the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness # C59496. Hyundai removed the factory style connector used on previous years from models which do not have the factory tow package. This ModuLite will allow you to tie into the tail light wiring to add a 4-way flat connector. The Curt Mounting Bracket # C58001 will allow you to secure... view full answer...
The Curt T-Connector Vehicle Wiring Harness # CU94FR is designed to connect to the factory tow package wiring which was removed from your 2023 Hyundai Palisade. This connector was included on all Palisades in previous years. For your Palisade you will need the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness # C59496 to splice into the tail light wiring. view full answer...
I would be happy to help you and understand the concern you have. The Curt item # C13427 has 11" of ground clearance from the bottom of the 2" x 2" hitch receiver. This hitch is confirmed to fit your 2023 Palisade and bolts to it with included hardware.
The etrailer Hitch item # e95ZR has a slightly higher ground clearance at 13-1/2". This hitch is also confirmed to fit the 2023 Palisade.
If you are planning on towing you will also need a wiring harness item # 119250KIT and a ball mount... view full answer...
Yes, I can absolutely help you!
For a hitch I recommend the etrailer Trailer Hitch Receiver # e95ZR. This hitch has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver. The 2" receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. It also features a nice matte black finish, that I personally think looks better when installed than the gloss finish options.
For wiring, the Curt T-Connector Vehicle... view full answer...
The 2023 Hyundai Palisade has a 3 wire taillight setup which is the correct info needed to wire up trailer wiring like the # C59236 that fits your 2023 Hyundai Palisade. view full answer...
While snap up brackets like the Replacement Hook Up Brackets for Curt Weight Distribution Systems # C17208 are somewhat interchangeable, I would still recommend using like branded brackets.
The Pro Series weight distribution hitches are manufactured by the same company as the Reese weight distribution systems.
I recommend going with the Replacement Heavy Duty Snap-Up Bracket for Reese Weight Distribution Systems # 58392 if your weight distribution system has a tongue weight capacity of... view full answer...
The Stealth Hitches Hidden Rack Receiver # 391HYUNPALIS19 is going to be the only receiver we currently offer which will hide behind the rear fascia when not needed. At this time none of our manufacturers have redesigned their receivers to fit behind the removable hitch panel you have on your 2023 Hyundai Palisade. This is likely due to the previous years receivers still fitting with the rear fascia.
The Towing Kit w/ Ball Mount # 391CONVPT5L is needed with the above receiver if you will... view full answer...
For your 2023 Hyundai Palisade I recommend the etrailer Trailer Hitch Receiver item # e45ZR. This class III hitch is custom fit and bolts to your Hyundai with included hardware.
From the ground to the very bottom of the receiver tube of the etrailer Hitch item # e45ZR is 11-1/2". This is the tallest ground clearance we offer for a hitch on your vehicle.
The reason I like this hitch is because of its hidden design. The only thing shown under the bumper is the receiver tube. It also has... view full answer...
You're not the only one who is at a loss, as Hyundai has made a bit of a mess of this whole thing with trailer wiring for the 2023 Hyundai Palisade - not to mention previous years. So I dug into this and there isn't an easy plug-in option for either the wiring or brake controller, regardless of tow package. You can still add a brake controller, you'll just have to do more wiring, and this is exactly what you'll need:
- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector... view full answer...
To install trailer wiring on your 2023 Hyundai Palisade you'll need the T-Connector Wiring Harness # C43FV which tees in behind your tail lights and pulls power directly from your vehicle battery via the included lead wire.
I also recommend picking up the Eclipse Magnetic Mounting Bracket # 306-X6019 so you can secure the 4-Way connector near your hitch receiver like the etrailer Trailer Hitch # e95ZR. view full answer...
While we do have towing mirrors that will fit your 2020 Hyundai Palisade, the one you referenced is not a fit. Instead, there are two options for your vehicle for towing mirrors:
- CIPA Universal Fit Towing Mirrors # CM11952-2
- CIPA Universal Towing Mirrors # 7070-2
These are the same mirror with the exception of the shape, as you can see in the accompanying photos of the mirrors on a 2020 Hyundai Palisade. The # CM11952-2 has a rectangular shape that is wider than the oval of the other... view full answer...
Yes, I recommend the etrailer Trailer Hitch Receiver # e95ZR for your 2023 Hyundai Palisade. This custom fit receiver has a hidden cross tube with a matte black finish for a clean factory appearance.
If you will be towing a small trailer or need to use Auxiliary Lights # C53201 with a hitch mounted accessory, you will need the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness # C59496. This will give you a 4-way flat connector you will be able to tie into your vehicle... view full answer...
Yes it will; I checked with Curt, and according to them all models of the 2024 Hyundai Palisade are compatible with their hitch:
- Curt Trailer Hitch Receiver # C13427
So it will indeed fit your Calligraphy Night Edition. view full answer...
Item # 118701 does not fit a 2023 Hyundai Palisade but I have one that does. It is the Curt T-Connector Vehicle Wiring Harness item # C43FV. This custom-fit T-connector plugs into your Palisade's wiring harness, which is located behind the tail lights. It will provide you with a 4-way connector capable of controlling your trailer or accessories lighting functions. No cutting or splicing required.
I have linked the installation instructions below.
The T-One Vehicle Wiring Harness item... view full answer...
We hate to be the bearer of bad news...
The # e45ZR fits the Kia Telluride only, so unfortunately it wouldn't be a fit for your Hyundai Palisade (even though the vehicles are very similar). The problem lies with the differences between the rear bumpers and where they sit on the vehicle. If were to somehow install the # e45ZR on your Palisade, you'll find that the hitch will be too far recessed under the vehicle and the receiver would sit high up enough that it would sit almost directly... view full answer...
Go To Results