Both the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C94WR and Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # DT22MR are confirmed to fit all models of the 2022 Hyundai Tucson. Both hitches have a maximum gross trailer weight capacity of 3,500lbs and maximum tongue weight capacity of 525lbs. The only real difference between the two is that Curt manufactures their hitches in the US and are known to have a much stronger and reliable powder coating... view full answer...
The Thule Hitching Post Pro - Folding Tilting 4 Bike Rack w Anti-Sway, Item # TH934XTR Is designed for 1-1/4" and 2" Hitches. It is a 4-bike rack but if you have a class I hitch, you can still only carry 2 bikes.
If you do not have a hitch already you can use # 75836. If you do already have a hitch then if it is a Class I hitch you need to stick to the 2-bike limit. It will easily clear the back of your 2016 Hyundai Tucson. I have linked a video review of the bike rack and a video... view full answer...
Yes, we do have a trailer hitch and wiring that fits your 2024 Hyundai Tucson.
Hitch
- etrailer Trailer Hitch Receiver # e38KR
This hitch has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver. The 2" receiver is the most common size used for hitch mounted accessories. It also has a nice matte black finish that I think looks better on your vehicle once installed.
Wiring
- Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236
If you... view full answer...
The Thule Hullavator Pro Kayak Carrier item # TH898 will work with the Thule WingBar Evo Crossbars like item # TH711320. These are just an updated version of the Thule AeroBlade Crossbars. The Hullavator can be attached to the WingBar in one of two ways, with wrap-around clamps or with a t-bolt. If you are using the t-bolt you don't need to cut any of the rubber inside the channel on the WingBar. The rubber is split so you just slide the t-bolt into place and tighten. I have linked a review... view full answer...
You need to add the Rhino Rack Accessory Bars for Pioneer Platforms like with part # RR43137B for a 48 inch option or # RR43232B for 24 so that you could attach the Malone Cargo Box part # MPG901 to the top of it. view full answer...
I checked with Thule and the Thule M.O.A.B. Roof Top Cargo Carrier # TH690 is confirmed to fit the factory cross bars of your 2012 Hyundai Tucson if your vehicle has them.
If you do not have a roof rack check out the link I provided that has all of the roof racks we offer for your vehicle. view full answer...
While the Thule Force XT L cargo box part # TH6357B does have a matte finish it's not textured to the point that stickers wouldn't adhere to it. Stickers would adhere to this box just as well as a glossy finish box. view full answer...
Yes, the Curt Class 3 Hitch # C94WR (13485) will indeed fit the 2024 Hyundai Tucson PHEV. I was able to confirm this directly with Curt. The # C94WR will fit all models of the 2024 Tucson, including the PHEV model.
I have linked out install video below if you want to take a look. view full answer...
Yes, the Malone Hanger 3 Bike Rack # MPG2139 will fit your 2014 Hyundai Tucson.
Please note that if you have any kids bikes or bikes that lack a horizontal top tube then you'll likely need the Bike Adapter Bar # MPG2165 so that the bike sits level and has enough ground clearance. view full answer...
Yes, you will want to get a hitch with a 2" receiver. They give you the most options for accessories and will allow you to get the maximum capacity out of your Tucson. I recommend the etrailer Hitch item # e38KR. This hitch is custom fit and bolts to your Tucson with included hardware.
The etrailer Hitch item # e38KR weighs 31 lbs and is made in the USA. It has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight.
The Hollywood Racks RV Rider Bike Rack item # HLY64FR is a... view full answer...
If your Tucson already has the factory side rails that run front to back, you can install crossbars using the following parts:
53 inch Thule WingBars, part # TH711400 in silver or # TH711420 in black
Evo raised rail feet, part # TH710401
On the other hand if your Tucson has a bare roof, Thule does NOT recommend installing a roof rack on vehicles equipped with the glass roof.
Yakima does not have a prohibition, but they state that the roof and trim are very soft, and that care should... view full answer...
For your 2017 Hyundai Tucson Sport with the Dual Exhaust on the passenger side I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75836.
This hitch has a 525lb tongue weight rating and 3500lb trailer weight rating making it a perfect option for carrying a bike rack, a cargo carrier, or even a ball mount for towing a trailer.
If you are planning on towing with your Tucson you will also need a vehicle wiring harness # 118501, and a ball mount, hitch ball, and hitch pin and clip... view full answer...
The Thule 7604B flush bar system won't fit your 2021 Hyundai Tucson but instead I recommend using the updated WingBar Edge roof rack which is the same thing just with the updated look and features of the new-gen Thule roof rack system. With the older system the bars were a little bigger and you had to trim the rubber T-Slot insert for track mount accessories but the new system has slimmer crossbars and a dual rubber strip that requires no trimming. The parts you need are the following:
WingBar... view full answer...
Yes, this Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part # C94WR is a compatible hitch receiver and confirmed to fit your 2022 Hyundai Tucson Hybrid Limited. view full answer...
Yes, you will indeed be able to open the rear hatch on your 2018 Hyundai Tucson with the Sportrack cargo box you asked about, which is the following part number:
- SportRack Horizon Rooftop Cargo Box # SR7016
The SportRack Horizon # SR7016 was a very solid choice as it presents a really nice overall value. It's got a good amount of cargo space at 16 cu ft, is easy to secure to your roof by tightening handles, and is a better price than similar boxes. view full answer...
According to Rhino Rack, their # RRVA118B-2 Vortex Aero Crossbars will fit a 2009 Hyundai Tucson as long as it has the roof rails running from front to back along the edge of the roof, but you will also need the SX Series Leg Kit, # RRSX100.
The crossbars are also available in a silver finish, part # RRVA118S-2. view full answer...
The Swagman Original 4 Bike Rack # S64400 that you referenced is designed to fit 2 inch hitches. So as long as you have a 2 inch hitch like the Curt Hitch part # C13120 installed on your vehicle it would work well. I attached review videos for both products for you to check out.
If you plan on carrying any women's or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Swagman Easy-Out Women's and Alternative Frame Bike Adapter # 64005 to provide... view full answer...
I did some research and I was unable to find a custom 7-way wiring harness for your 2022 Hyundai Tucson. You do have an option, but it will require some wiring splicing. The Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires, part # ETBC7, will fit your vehicle.
You will also need a brake controller. I like the Curt Echo Wireless Trailer Brake Controller - 1 to 2 Axles - Proportional, part # C51180, because it is wireless. You will not have... view full answer...
The Curt Trailer Hitch Receiver part # C13240 is what I recommend for a 2018 Hyundai Tucson. It will fit models with dual exhaust tips as you can see in the photo below, just not Night Edition models. This hitch will be great for towing or hitch mounted accessories like bike racks such as the Thule Hitching Post Pro Bike Rack part # TH934XTR which is what I recommend. view full answer...
Go To Results