Yes, they all work together.
You have 10 inch electric brakes, part # AKEBRK-35, which are designed for 10 inch hubs like part # AKHD-545-35-EZ-K.
Those hubs use inner bearing # L68149 and outer bearing # L44649 which is exactly what fits onto the spindle # TRU74FR. Plus, the sipndle has a 4-bolt brake flange for the 10 brakes to mount on.
One additional thing to keep in mind is that to install spindle it needs to be completely concentric which is normally done by experienced welders... view full answer...
While there are no clevis adapters with a 1" diameter hole, the 1-1/8" hole on the Clevis Adapter for B&W Tow & Stow 3" Ball Mounts # BWTS35300B will work just fine if you are towing at low speeds like a typical farm application.
If you do plan on towing a trailer with a clevis at higher speeds then it would be better to have one that matches with your 1" pin. We have a few different options here like combining the BulletProof Hitches Adjustable 2-Ball Mount for 3" Hitch # HD306 with... view full answer...
If you're going to use the Timbren Axle-less Suspension System 5200-lbs with brake flanges installed, like the 2" lift model # TASR5200S05 or 4" lift # TASR5200S03 , those are compatible with the Trailer Hub and Drum Assembly - 5.2K and 6K E-Z Lube Axles - 12" - 6 on 5-1/2 - Pre-Greased # AKHD-655-6-EZ-K since they have compatible inner/outer bearings, races and grease seals. However, the # AKHD-655-6-EZ-K are not compatible with the Timbren Axle-less Suspension # ASR5200S01 because the... view full answer...
Yes, there is a hitch available for a 2023 Hyundai Venue. It is the Curt Trailer Hitch item # C57CR. This hitch is custom fit and bolts to your Hyundai with included hardware.
The Curt Trailer Hitch item # C57CR is a class I hitch with a 1-1/4" receiver. It is made in the USA and weighs 29 lbs. This hitch has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.
If you plan on towing you will also need the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258... view full answer...
The Curt Trailer Hitch Receiver part # C57CR is a confirmed fit for a 2021 Hyundai Venue. It offers an easy bolt-on install. It has a class I rating with 1-1/4" receiver tube opening. It can be used for both towing as well as bike racks and cargo carrier. If you have any other questions please just let me know. view full answer...
I checked our website and Swagman's and got the same information. While both the capacity of the Swagman XC2 bike rack item # S64650 and the Curt trailer hitch item # C57CR are within capacity, and will mechanically work together, Swagman says it needs to used on a minimum Class 2 hitch receiver. On some of the older hitches there was a metal piece welded into the rear of the 1 1/4" receivers. This was done so you couldn't insert the 1 1/4" bike rack into the 1 1/4" hitch receiver.
The... view full answer...
Yes, the Thule EasyFold XT 2 E-Bike Platform Rack part # TH903202 is compatible with the 1-1/4" hitch on both your 2012 Chevy Equinox and 2019 Chevy Traverse. The EasyFold is compatible with Class I and II 1-1/4" and 2" hitches so you won't have any issues using it on almost any 1-1/4" hitch regardless of the vehicle. The Thule EasyFold XT 2 E-Bike Platform Rack weighs 45 lbs and can handle 65 lbs per bike. As long as your E-Bikes do not weigh more than 65 lbs then the Thule EasyFold XT... view full answer...
Great question Fred. I recommend to use the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat part # 118617 for the 2018 Dodge Durango without a factory wiring package. The Tekonsha can handle over 1 more amp per circuit of power compared to the Curt wiring harness part # C56336 so you don't overload the vehicle's electrical system. The Tekonsha converters are also known to last longer compared to the other brands. Although both wiring harnesses will work for the 2018 Dodge Durango,... view full answer...
I'll start off by noting that your B78-13 tires with Load Range B are going to be 175/80r13 when using the metric measurement; and it sounds like you currently have hub-centric wheels. If you want to continue using hub-centric wheels, you'll want to use a digital caliper like the # PTW80157 to get a precise measurement on the center bore of the hubs on your trailer and match it with your new wheels.
If you measure your hub bore and find that it is 2.99" (the smallest common size for 13"... view full answer...
The trailer hitch I recommend for your 2022 Hyundai Venue is the Curt Trailer Hitch Receiver # C57CR, which is a Class I hitch with a 1-1/4" receiver and a thicker powder coat than the other hitch options for your vehicle. If you already have a bike rack and cargo carrier system then it's likely for a 2" receiver and their aren't any custom 2" receivers available for your vehicle so you'd have to have one fabricated.
If you don't already have a cargo carrier/bike rack setup, then I recommend... view full answer...
The Malone Cargo 12 isn't a vehicle specific item.
As long as the vehicle's roof rack crossbars are installed so their bar spread (center to center distance between front and rear crossbar) is between 25 and 27 inches apart, the Malone # MPG901 Cargo 12 roof cargo box would work great.
If you don't already have a roof rack, I'd recommend the Malone AirFlow 2 crossbars for roofs with raised side rails, part # MPG215.
If you don't have the raised side rails, Yakima has a rack fit that... view full answer...
The Replacement Wheel Holder for Swagman G10 Bike Rack item # G1025 you mentioned, is designed to work with wheels up to 3" wide and fits the right side.
If you are needing the matching left side wheel holder you will need the item # G1020 which also fits tires up to 3" wide.
We also have the Fat Tire Adapter Kit for Swagman G10 and E-Spec Bike Racks item # S64679 which fits tires up to 5" wide. view full answer...
You'e in luck as there is a trailer hitch receiver that is a fit for a 2020 Hyundai Venue, which is the following:
- Curt Trailer Hitch Receiver # C57CR
This is a Class I hitch with a 1-1/4 inch receiver, and is a complete bolt-on installation with no drilling needed. It also has a really nice concealed look, as you can see from the accompanying photo, so your '20 Venue will maintain it's aesthetic. I have added a link to the installation instructions for you to check out as well.
If... view full answer...
Go To Results