The difference between a 2-point and 4-point sway control system has to do with the amount of locations where friction is used on the system to limit and stop trailer sway. A 4-point system like the Equal-i-zer # EQ37120ET you referenced uses friction at the ends of each spring bar on the trailer frame as well as where they mount in the head. A 2-point system will generally just have friction spots at the ends of the spring bars.
A 4-point system will technically provide a bit more sway... view full answer...
Yes, you can add the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel and Gooseneck Trailer Hitches, # RP30126, along with the optional part number # RP30138 if you want to include the Gooseneck Hitch connection; this will be the relative equivalent of your 2014 Ford F-250 Super Duty being delivered from the factory with OEM puck system installed. (This fits 2011 - 2016 Ford F-250 or F-350 Super Duty Trucks.)
This installation will allow you to use any 5th wheel hitch... view full answer...
For your 2016 Ford F-53 chassis you will need a hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07. This class V receiver can be welded or bolted to the frame on your F-53 motorhome chassis. These brackets are 7" tall to keep the receiver up tight to the frame. If you are needing more drop the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 has 16" tall brackets.
Both these receivers are rated for up to 1,600lbs of tongue weight and... view full answer...
If your 2018 Thor Class C is built on a 2017 model year Ford E-Series E350 Cutaway Chassis with V8 or V10 engine then you can use the Roadmaster Reflex Steering Stabilizer # RM-RBK24-RSSC.
This and all other kits for the 2017 chassis are shown on the linked page.
The RV will have both a Ford chassis VIN and a Thor VIN and the one for the chassis will let you confirm its model year. Often RVs are built on a prior year platform.
At this time we do not have confirmed fit for the 2018 model... view full answer...
We do offer options in both Class IV and Class V hitches, shown on the linked page, that fit the base Ford E450. I contacted Thor Motorcoach to try to confirm the net towing capacity of your 2002 Class C built on a 2002 Ford E450 cab and chassis, but since there are several series and multiple models of Class C made on that same platform Thor needs the VIN in order to confirm the actual net towing capacity of any given vehicle. It is possible your Thor owner's manual will indicate this... view full answer...
We do have spacers available for your Firestone Air Helper Springs # F35FV on your 2022 Ford F-350. In order to determine the correct spacer you will want to measure the distance between where the upper and lower brackets would be located on your vehicle.
For vehicles with a 2" lift and from 7.5" to 8.5" between upper and lower brackets you will need the Lift Spacers for Firestone Ride-Rite Air Helper Springs - 2" Spacers - Qty 2 # F2366. For vehicles with a 3" lift and from 8.5" to 9.5"... view full answer...
Yes, we have the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1800B-2 that are held in place with the Rhino-Rack Roof Rack Legs # RL150S10. Or if you are looking for a Pioneer platform the Rhino-Rack Pioneer Platform Rack # RR43QX is the one you need.
Both systems attach to the gutter tracks along your 2010 Ford E-350 Van. view full answer...
All you need is the correct adapter to connect a Roadmaster Falcon 2 Tow Bar part # RM-525 to a Blue Ox base plate kit. For that you would need the part # RM-031.
This will replace the ends of the tow bar arms with ones that will adapt to the lugs of the base plate. view full answer...
The wiring harness by itself from kit # 118243 is not available as a separate part but what you could do is use # PK11998 but one end would have to be hardwired to the truck's wiring. It ahs the following wire colors and functions:
Red - Left Turn and Stop
White - Ground
Blue - Electric Brakes
Green - Right Turn and Stop
Black - Battery
Brown - Running Lamps
Yellow - Backup Lamps view full answer...
On your 2016 Ford F-150 there is not a different air helper spring kit for if it is a single cab short bed truck or if it has an extended/crew cab, they all share the same kits which is why we do not make mention of the style of bed/cab on our website.
With that said the only thing that affects fitment is if your truck is a 2WD or 4WD.
Out of all of the air helper spring kits for your F-150 I recommend the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2582... view full answer...
The Air Lift LoadLifter 5000 that fits your 2020 Ford F-350 dually is the part # AL76KV. The link is down below or you can click this # AL76KV. view full answer...
Since nobody makes a higher class hitch for the 1998 Mercury Mystique the only option is a universal weld-on hitch. I recommend the Draw-Tite Ultra Frame # 41990-07. This is a Class V hitch with a 2" receiver and 7" tall brackets. We recommend taking this to a certified welder for installation. It is also worth noting that upgrading the hitch capacity does not increase the towing capacity of your vehicle. Although the hitch can handle 16,000 lbs you will still be limited by the max towing... view full answer...
We do sell the mounting brackets like # BWRVR2505 separate from the base rails. Please note that this is a custom-fit part so it is make/model/year specific. It is designed to fit the 2020 Chevrolet and GMC 2500 and 3500 Heavy Duty long and short bed trucks without the OEM prep package. Also be aware that these brackets are designed to work with base rails # BWRVR3210. We do not recommend mixing bracket and rail manufacturers--both elements should always come from the same manufacturer. view full answer...
We sure do!
You are correct that the Replacement Rear Latch Assembly for Extang Express Soft Tonneau Cover - Driver's Side # EX1072 is for the driver side, for the matching passenger side assembly you will need the # EX1073. view full answer...
I talked to Snap and Zap and they said that they are in the process of creating custom tow mirrors for the 2021 Ford F-150 and they could be available in a few months. For the time being, you could use a universal style mirror such as K-Source Universal Towing Mirrors - Clip On - Qty 2 # KS3891-2. I have attached a video for these tow mirrors. view full answer...
I may have a few options for you but unfortunately we do not have any of the real deep/cowboy style bumpers. We have the Westin Fey Surestep # 21007-92230 or the Westin Fey Diamondstep # 21000-92230 if you were wanting to go with a more rugged or traditional look. view full answer...
The molded polymer plastic step pad on the Westin Fey Surestep Deluxe XLT Rear Bumper # 21007-92230 for your 1986 Ford pickup is designed only for that bumper piece and isn't available to cover up where the hitch ball is meant to be installed.
Since you're also needing a hitch receiver with a higher towing weight capacity I recommend checking out the Curt Trailer Hitch Receiver # 14001 which has up to 10K towing and 1K tongue weight ratings, plus the crosstube is hidden for a cleaner-looking... view full answer...
We offer several hitch-type winch mounts that fit a 2-inch hitch. These include the Curt # C31009 with handles, Curt # C31010 without handles, the Draw-Tite # 6495 and Bulldog # BDW20011 among others. All are shown on the linked page.
Most winches will bolt right up to these mounts since they use industry-standard mounting hole spacing but it is possible that a certain winch might req view full answer...
We have universal-fit towing mirrors for your 2017 Ford Expedition but they will not be the same as the custom-fit ones that are made specifically to fit an F-150 pickup.
Popular choices are the K-Source 2-mirror sets # KS3990 and # KS3891-2. Both offer tool-free clip-on installation. Mirrors # KS3990 are a dual lens design while # KS3891-2 have a single large mirror glass. Both offer manual adjustment. view full answer...
Yes, the Husky Liners Classic Custom Auto Floor Liners # HL33251 that you mentioned also do fit a 2010 E-450 RV chassis like your Phoenix Cruiser 2551. view full answer...
Go To Results