Expert Answers about Ford Focus
- Diode Kit for Flat Towing 2012 Ford Focus
- We do have flat towing diode kits for the various versions of the 2012 Ford Focus, such as # RM-154, that you can see on the linked page. You can use the Select Vehicle Style drop-down menu bar at the top of the page to choose your Focus and then see suitable kits.
We also have individual diodes # RM-790 and # RM-690 as well as 2-pack # RM-792 and 4-pack # RM-794. All of these come with spade terminals that accept wire leads.
view full answer... - Is there a Trailer Hitch for the 2005 Ford Focus with Street Appearance Package and No Drilling
- If your 2005 Ford Focus is a sedan then there are no trailer hitches that are confirmed to fit the models that have the Street Appearance package. If you have a hatchback then # 24692 is likely to fit but there is drilling required for the installation. You can see the installation steps in greater detail in the instructions and video I have linked for you.
view full answer... - Hitch, Ball Mount, Trailer Ball, and Trailer Wiring Harness for 2014 Ford Focus Hatchback
- The hitch needed will depend on if your Focus is an ST model. If it is, you'd need the Curt Class I hitch, part # C11431. If it's NOT an ST model, you can use the Curt Class I # C11158, as long as your vehicle isn't an electric model. The recommended ball mount for either of them is part # C45521. Part # 19256 is the recommended 1-7/8 inch trailer ball and part # 118549 is the trailer wiring harness.
You also need part # F-4 for the pin and clip.
view full answer... - Availability of Replacement Key for Wildwood Camper
- Global Link does have a hand in a lot of the keys for campers, but all of theirs use numerals, like 391 for the part # 295-000079 that you referenced.
If you can't find a specific number on the lock cylinder and you aren't sure that your original number was then you might need to go ahead and replace your entire lock with something like the Entry Door Locking Latch Kit # 295-000019. This installs in cutouts that are 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall so if you have something...
view full answer... - Replacement LED Monitor Light for SMI Stay-IN-Play DUO Supplemental Braking System SM99251
- The SMI Stay-IN-Play DUO Supplemental Braking System # SM99251 includes an LED monitor light for the motorhome to provide visual confirmation of braking in the toad. This is shown by the arrow in the linked photo of the complete SMI kit.
This individual item is offered as a replacement part # SM99612. For extra wire use # 12-1-1.
This light does not electrically integrate into the actual motorhome display but it could be physically placed there if space allows.
Please refer to the linked...
view full answer... - Recommended Plug-And-Play Tail Light Wiring Harness For A 2005 Ford Focus Sedan
- For a 2005 Ford Focus sedan there are no plug-in tail light wiring harnesses so your only option to avoid splicing into the wiring harness would be to use a magnetic light like the Heavy Duty Magnetic Tow Lights # TL21RK. These magnetic lights have a 4-pole connector and 20' of wiring to run from the motorhome to the back of your Focus to completely avoid touching the wiring in your vehicle.
I've attached a short video below to help show you how this is installed.
view full answer... - Availability of a Roadmaster Base Plate to Reese Tow Bar Adapter for Flat Towing a 2004 Ford Focus
- It is possible that you will be able to use the Reese tow bar with the Roadmaster base plates, # 52491-1. If it is the Tow Ready Tow Bar by Draw-Tite, Hidden Hitch, and Reese, # 63180, you will need Roadmaster base plate to Tow Ready tow bar adapter, # RM-025. In order to make the base plate arms removable, you will also need quick disconnects, part # RM-201. I have also included a link to our series of articles on flat towing a vehicle.
You should keep in mind that the Tow Ready tow bar...
view full answer... - 4-Pole Trailer Wiring Harness for 2016 Ford Focus Hatchback
- If your 2016 Ford Focus Hatchback is the ST model you can use the Curt 4-pole wiring harness kit # C56273. This kit include custom-fit connectors to allow plug-in installation at your taillights. The only wire to be spliced is the 12V power wire; an article is included to assist you in routing that one wire.
An install video is linked.
view full answer... - Base Plate Kit Available for Flat Towing the 2012 Ford Focus
- If your 2012 Ford Focus does not have adaptive cruise control then we do offer a couple of base plate options. I have provided a link to the options for your reference.
I recommend the Roadmaster Base Plate Kit # RM-524430-4. There are several components that are associated with a full flat towing setup up and if you do not already have them you will need the base plates like the # 524430-1, a tow bar, safety cables, tow bar wiring, and a supplemental braking system.
For a tow bar system...
view full answer... - Hitch and Cargo Carrier Recommendation for a 2013 Ford Focus
- We have a solution for a cargo carrier that would support a 50 lb power chair but you would need to have a trailer hitch installed first like the part # C11158 which is confirmed to fit your vehicle.
Then for a cargo carrier the part # C18110 would easily support the weight of the chair. I attached a review video for the chair on a similar Focus as yours as well.
view full answer... - Availability of Trailer Hitch for 2015 Ford Focus ST
- The Curt trailer hitch # C11431 is a fit for all ST models. If you want to do a little light towing you will want ball mount # C45520 and pin and clip # F-4. For a 1-7/8 inch ball use # C40001 and for a 2 inch ball use # C40018.
All non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps. The strap you need is sold separately, part # 18050. I attached an install video that shows how it is used.
view full answer...
Go To Results