We have the Roadmaster Rear Anti-Sway Bar, # RM25VR for the 2021 Ford F-53 chassis but for the front of this chassis an anti-sway bar not available. For front suspension enhancement on this chassis, I suggest the SumoSprings Rebel Custom Helper Springs, # SSF-173-40-2. The springs work independently from one another to support each side of your vehicle. This action helps to reduce body roll when you make a sharp turn. This also helps compensate for an off-center load. view full answer...
Yes, the Phoenix Faucets 4" Dual Handle RV Shower Valve. # PF213351, can be mounted 180-degrees and the handles can be switched.
This is the only faucet that we carry that is both in a chromes finish and use the teapot handles. view full answer...
Good news! The Sumo Spring part number for your Motorhome that you are looking for # SSR-187-54-1 can be found right here on our website. I have included a link to the part on this page for your convenience. view full answer...
All of the RV-rated trailer hitches we offer are the 2-inch size and the highest-rated among them are the adjustable frame-mount types like Curt # C13701. This hitch offers 2-inches of drop for its receiver tube to allow for better clearance with the RV exterior. The B&W custom hitch you referenced, part # BWHDRH25122, is not a fit for your F-53-based Mirada and only adjustable universal-fit hitches like the Curt BWHDRH25122are available.
The Curt hitch is rated for 5K GTW and it can be... view full answer...
We do indeed offer a front anti-sway bar for your 2015 Four Winds Class C motorhome on an E450 chassis. You'll want to use the Roadmaster # RM-1139-176. This part will replace the existing sway bar, but will reuse the factory hardware and end links.
A rear sway bar is also available as part # RM-1139-147. view full answer...
For your 2016 Ford F-53 chassis you will need a hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07. This class V receiver can be welded or bolted to the frame on your F-53 motorhome chassis. These brackets are 7" tall to keep the receiver up tight to the frame. If you are needing more drop the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 has 16" tall brackets.
Both these receivers are rated for up to 1,600lbs of tongue weight and... view full answer...
If you wanted to just install a rear sway bar on your 2016 Ford F53 Thor ACE 27.2 you certainly could do that with the part # RM-1139-146. We often recommend people first install a rear sway bar since it will make the biggest improvement and if they want more stability to then go with a new front sway bar. For that part # RM-1139-148 is what you need. view full answer...
On the Ford F-53 chassis there is a 6 pin connector that has the trailer wiring circuits. I attached a picture that shows what it looks like.
Unfortunately, unless you can locate the OEM 7-way that would have the 6 pin plug on the other end, you'll need to do some splicing.
If the connector you found is active, to splice in a 7-way I'd recommend the Hopkins # HM40975-11998. The pigtail included with the connector uses a different wire color code that usual, see the bottom of the product... view full answer...
The item you reference, the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes, # RM-RBK25-RSSA, is not a confirmed fit for your 2021 Holiday Rambler Admiral, 29M (built on the Ford 1800 GVWR F53 chassis with 7.3L Triton V8). While the # RM-RBK25-RSSA is listed as a confirmed fit for the 2021 F53 24K and 26K chassis it is not listed as a confirmed fit for the 18K chassis, which is what the Holiday Rambler, 29M is built on. I contacted Roadmaster to inquire... view full answer...
For your 2003 Forest River Georgetown RV that is built on the 2002 Ford F-53 chassis we do not offer any front-mount hitch receivers. I did review photos of the RV to see if it has an exposed rear bumper that would allow use of a spare carrier such as the Ultra-Fab Folding Spare Tire Carrier # UF15-954730, but its bumper appears to have a full cover.
If your towed vehicle has a 2 X 2 rear trailer hitch you might consider the Curt Trailer Hitch Mounted Spare Tire Carrier # C31006 which... view full answer...
For your 2015 Thor that is build on a Ford F-53 chassis you would want the Roadmaster Steering Stabilizer # RM-RBK4-RSSA. This is the only stabilizer we offer confirmed to fit your vehicle.
This product has a ton of positive reviews from our customers who have tried it so I would highly recommend it for you. We do not carry the Bilstein brand. view full answer...
We do offer both front- and rear-axle suspension enhancement kits for the 2015 Ford F-53 that can be seen on the link provided. Since it is possible that a 2015 model year RV could be based on a 2014 F-53 you'll want to verify the model year of the base chassis. A separate link is provided for suspension kits for 2014 model year F-53s. The products referenced fit both model years.
For a 2015 F-53 we offer hollow rubber springs # TFFF53B from Timbren.
No air spring kits are offered for... view full answer...
The Phoenix USA Lug Nut Covers # PXQ33T are the closest option to the Phoenix USA Front Hub Cover w/ Pop Out # PXQ822F lug nut covers that you referenced. They are 2-3/4" tall and fit 33mm hex lug nuts. view full answer...
For your 32-foot Allegro 31UA motorhome based on the 18,000-lb 2001 Ford F-53 chassis you can use the following anti-sway products from Roadmaster:
Front Anti-Sway Bar # RM-1139-148
Rear Anti-Sway Bar # RM-1139-143
If you wish to add a front-axle jounce spring kit to upgrade your suspension I recommend SumoSprings kit # SSF-172-40-2 which is designed for your 18K chassis. These bolt-on USA-made jounce spring provide progressive load support and they require no maintenance. view full answer...
If your 2019 36UA Open Road has round 8" feet then you will want to use the # SP34FR4 SnapPad. This comes in a quantity of 4. For 10" round jack feet, # SP34FR64, and # SP34FR74 for 11-1/2". view full answer...
I am not seeing a plug and play brake controller option for your 2021 Holiday Rambler Admiral on a Ford F-53 chassis. There are brake controller options like the Tekonsha Prodigy P2 Trailer Brake Controller # 90885 which provides a proportional controller with an easy to read blue LED display. But it needs to be spliced in.
I looked this up by the chassis information and the motorhome information and both indicated there is not a plug and play option available. If your motorhome has a... view full answer...
Yes, you can use the Heat Strip part # ACMHD with the Advent Air Replacement RV Air Conditioner # ACCOL135 that you referenced. For more info on the heat strip like where and how it installs check out the review link I attached for it. view full answer...
I researched photos of your 2015 Thor Ace motorhome to see the shape of the exterior porch light and it appears to be a crescent-shaped light that directs most output downward to the entry step area.
All of our available LED-type porch and exterior light assemblies can be viewed on the link provided. None is an exact match for your OEM light but the Optronics RV Porch/Utility Light # RVPL3C is the most similar.
I know you mentioned you do not want to simply replace the bulb with an LED... view full answer...