I attached a picture that I took from the instructions for the TracRac # TH29056XT that you referenced that shows the tech tip for the Ford E-150s like what you have. The issue is the shape of the Ford gutter. The strip pushes the J-hook clip far enough away from the gutter that it doesn't reach. view full answer...
I have a solution for you, but there is not a Class III custom fit hitch available for a 2009 Ford E-450 Bus chassis and the 7" Weld on Bracket Kit # 4907 with the Draw-Tite Ultra Frame Service Body Hitch # 41990 is a Class V hitch- so it's not exactly what you're seeking.
Instead, you can use the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703, which is a Class III hitch that will fit on box frame, I-frame or C-frames between 22" and 72" wide. This hitch can either... view full answer...
We do offer a range of floor mats for the 2001 Ford van on which your Coachman Santara Class C motor home is based. The link at right will take you to our main page where you can see all options and choose among brands, types of construction (rubber or plastic) and color. There are filters on the page to allow you to narrow the results shown based on your preferences.
For example, for a set of black mats for the front you might consider the USA-made WeatherTech # WTW51 or if you prefer... view full answer...
The 2015 E450 is only produced as a chassis or a cutaway van chassis, so I assume you're speaking of a RV on a van chassis. The Draw-Tite # 65053 is a fit for the 2015 E450. I've confirmed this with Draw-Tite. view full answer...
For 4-pole trailer wiring for your 2007 Ford E450 van without the factory tow package you can use Curt custom-fit passive harness # C56020 or the Hopkins custom harness # HM11140495 which has a powered converter. Both are shown on the linked page.
The differences between the two are that the Hopkins kit requires an additional wiring step for installation and that it offers a much higher 8-amp output current rating. This harness will also protect the van's internal wiring from any shorts... view full answer...
Yes, we have the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1800B-2 that are held in place with the Rhino-Rack Roof Rack Legs # RL150S10. Or if you are looking for a Pioneer platform the Rhino-Rack Pioneer Platform Rack # RR43QX is the one you need.
Both systems attach to the gutter tracks along your 2010 Ford E-350 Van. view full answer...
Unfortunately, the backpack blower rack is only available as part of the Pack'Em Expansion Pack, part # PK-OP1.
This kit holds a blower, a trimmer line spool and a cooler. I wish these were available as a separate item but they are only available in the kit. view full answer...
We do have a selection of front floor mats that are a custom fit a 2013 Ford Van which I have linked for you to reference.
I recommend going with one the WeatherTech # WT26DV because of the raised treads and sides to help channel and contain messes.
Please note that if the RV manufacturer made any changes to the front of the vehicle (like the center console) then these may not fit properly. view full answer...
We do not carry OEM replacement mirrors for your motorhome that is based on a 1988 Ford E-350 van but we do have towing mirrors that slide onto the stock mirrors to give you a wider field of view when towing a trailer. You can see both options by clicking on the linked page. Both products are a set of two slide-on towing mirrors, part # LVT-2000 from Longview and part # CM11000-2 from CIPA. Both fit only the chrome door-mount, two-point breakaway style mirror. view full answer...
If the interior of the 2003 Winnebago is the same as the 2003 Ford E-450 then we do have mats that you could use. I have included a link to the options to the right.
The Winnebago was more than likely built on just the chassis of the E450. That would mean the interior could be vastly different than the regular van. It is also possible that it was built using the cab and the chassis and the interior could be the same.
Either way if it is the same then the mats linked to the right will fit. view full answer...
We do have roof rack options for a 2004 Ford Van. I have included a link to the available options for you to view. The most popular and most economic option is the Yakima system. For it you will need the following parts:
Crossbars, # Y00410
Yakima Raingutter Towers, # Y00101
I have included a link to the installation details for the Raingutter Towers for you.
If this is a work van and you need a ladder rack option, we have those as well. I have included another link to them for you. view full answer...
We offer tire chains for both of the stock tire sizes offered on the 2008 Ford E-350 van. Those tire sizes are 225/75-16 and 245/75-16. Our range of tire chains for each size is displayed on the two linked pages. Some chains are made for on-road use, others off-road. Some can be used in both types of applications.
For 225/75-16 tires Titan offers the low-profile S Class chain set # TC2319 as well as other options that require more clearance in the wheel wells. For tire size 245/75-16 again... view full answer...
We do have the Curt Front Trailer Hitch Receiver # 33055 which will fit your 2002 Ford E-350 RV chassis. While there are no custom fit units for your 2012 Subaru Outback you may be able to have one fabricated using the 2" Weld On Receiver # E17. To determine this you will want to visit a local fabrication shop so they can verify if one can be fabricated. view full answer...
We might have a solution for you, but you'll need to do some measuring at the rear of your motorhome to see if it will work.
The Draw-Tite # 41990-16 is a Class V hitch, which has a GTW capacity up to 16,000 lbs and a tongue weight capacity of up to 1600 lbs, when correctly installed exactly according to the instructions.
In order to determine if this hitch would work for you, the outside to outside dimension between your frame members needs to be less than 44 inches. You'll also need... view full answer...
Thanks for returning to etrailer.com for your towing needs.
You basically have six different options when it comes to a trailer hitch for your 2013 Ford Econoline Van.
Class III with 2 inch receiver, Curt # 13055 and Draw-Tite # 75703, both with 600 lb tongue weight capacity and 6,000 lbs towing.
Class IV with 2 inch receiver, Curt # 14055 and Draw-Tite # 41906, both with 1000 lb tongue weight capacity and 10,000 lbs towing.
Class V with 2 inch receiver, Draw-Tite # 41945 with 1500... view full answer...
Provided that the motor home is built on a 2011 Ford E-450 chassis and as long as the floor is the same on it as it would be on the regular E-450 vans, you could use the floor mats linked to the right.
But it is possible that the interior is different on an RV cutaway compared to a regular van. The mats are designed for and tested for fit on the regular van models though and not RV cutaways. view full answer...
Your 2015 Forest River Forester Class C is built on a 2014 Ford E450 Class C chassis so for a steering stabilizer you would want the part # RM-RBK24-RSSC that you mentioned.
For a rear sway bar then you would want the part # RM-1139-147. view full answer...
We do offer frame-mount trailer hitches for RVs and these are available in either bolt-on or weld-on varieties. You can click on the included link to see all such items, such as the Curt # C13701 that carries a 500-lb tongue weight (TW) rating and a 5000-lb gross trailer weight (GTW) rating without weight distribution. Hardware is included. This is the highest-rated hitch we offer for RV applications. We have no general-purpose RV hitches rated for 6000-lbs.
It is important to check with... view full answer...