The highest capacity hitch available for the 1998 Expedition is the Curt # C13049. The hitch has a 6000 lb gross towing or 600 lb tongue weight capacity, but when used with weight distribution, the capacity increases to 10,000 gross towing or 1000 lbs tongue weight. You will want to determine the towing capacity of your Expedition and abide by whichever is lower.
If you would care to reply with the fully loaded and ready to tow tongue weight of your dump trailer, plus the weight of anything... view full answer...
The Roadmaster High-Low Hitch Adapter, part # RM-048-6, is rated to be used with tow bars for flat towing behind a motor home and not for weight carrying applications or trailer towing.
The use of any adapter, including this one, will reduce the tongue weight capacity of the hitch by 50 percent. Since tow bars and flat towing physically function differently than towing a trailer or carrying a bike rack, the Roadmaster High-Low was not designed for towing a trailer.
It sounds like you... view full answer...
We offer universal-fit towing mirrors such as the K-Source # KS3891 that you referenced that will fit your 2014 Ford Expedition. This clip-on towing mirror will fit both driver and passenger side stock mirrors on your Expedition. It is sold as a single unit so you'll need two to equip both mirrors on your truck.
We also offer door- and fender-mount towing mirrors and these can be seen on the link provided. view full answer...
The CIPA Custom Towing Mirror, # 11601, only fits up to a 2002 Ford Expedition. For the 2004 model, you will need to use a universal towing mirror.
The benefit is that universal mirrors are more economical and you can move them to most any other vehicle if you need to.
The most popular universal towing mirror is the CIPA Universal Clip-On Towing Mirror, # 7070. This mirror will fit your vehicles mirrors as long as there is a lip or space between the glass edge of mirror and mirror housing... view full answer...
Hitch weight and tongue weight basically refer to the same thing...the vertical weight that is present on the hitch of the tow vehicle from the trailer. This figure is the figure to use for picking out a weight distribution system.
Since your tow vehicle has a tongue weight limit of 920 lbs and your trailer appears to have that as a tongue weight the best system then will be one that has a tongue weight range that has that number right in the middle of the range.
For that we have the... view full answer...
We do have towing mirrors that will work with your 2019 Ford Expedition, but there are not any custom-fit slip-on style towing mirrors for your vehicle. Instead, I recommend a universal-fit strap-on style towing mirror such as the K-Source Universal Towing Mirrors # KS3891-2. These are a confirmed fit for your Expedition and strap on to your factory mirrors to keep them secure while driving. Also, it is fully adjustable to position them however you need depending on what type of equipment... view full answer...
None of our mirror vendors offers a custom slip on mirror for a 2007 Ford Expedition, but we do offer a mirror that would work well for you.
I'd recommend a universal towing mirror like the K-Source Clip-On Mirror, part # KS3891. The mirror uses ratcheting rubber straps to provide a snug, nearly vibration-free fit. The mirror is highly rated by our customers, as you can see by looking through the customer reviews. You can see a product description video by clicking the provided link. view full answer...
Here at etrailer.com we have two different radiator adapter fittings for the 1997 Ford Expedition.
The adapter that you need will depend on the size of the transmission line on your Expedition. For a vehicle with 1/2 inch-20 thread on the transmission line fitting, use kit # D13024 or for 5/8 inch-18 thread fitting, use kit # D13025. view full answer...
All of the aftermarket bull bar and grille guard products with stainless steel components offered for your 2013 Ford Expedition EL are shown on the page I linked for you.
Some of these like the full-size Westin Sportsman Grille Guard # 45-2400 are not compatible with the grille-mounted sensors on some versions of the Expedition, such as the Platinum Edition. Their Ultimate Bull Bar # 32-2405 fits the EL but it will interfere with the operation of the parking sensors.
Aftermarket guards... view full answer...
The Westin Bull Bars and their mounting kits are both made to fit specific vehicles. If the bull bar you have is either part # 32-0245 or # 32-0240, then it is a fit for your 1998 Ford Expedition. The replacement hardware for the part # 32-0245 or # 32-0240 is Item # 32-024PK.
If you need a bull bar to fit your 1998 Ford Expedition and you have the 4-wheel drive model, we have the Aries Bull Bar in two colors, part # AA35-3004 or part # AAB35-3004.
If your 1998 For Expedition is... view full answer...
While we don't have any custom fit tow mirrors for your 2005 Ford Expedition we offer universal-fit towing mirrors such as the K-Source # KS3891 that will fit your Ford Expedition. This clip-on towing mirror will fit both driver and passenger side stock mirrors on your Expedition. It is sold as a single unit so you'll need two to equip both mirrors on your truck. view full answer...
A lot of this depends on how much power your refrigerator uses and the size of your battery. I'll also add that you're likely not going to be able to accomplish running the fridge completely on solar power with only 1 battery and you're likely going to need 4 batteries to provide you with enough juice to run the fridge for several days on the battery, even when being recharged with solar power.
A fridge like the Everchill # 324-000119 uses 11-amp hours of power, so it's going to consume... view full answer...
We do not show any confirmed fits for suspension enhancement kits for the 2003 Ford Expedition and I checked directly with SuperSprings and Timbren too and they have no kits for your vehicle. But there is another more effective way to help level a tow vehicle if trailer tongue weight (TW) is the cause for the rear-end sag.
A weight distribution/sway control system (WD/SC) will actually push some trailer TW forward onto the front axle which levels the vehicle and restores steering and braking... view full answer...
K-Source Towing Mirror # KS3891 is one of the same mirrors found in the set of two, part # KS3891-2. These do feature convex glass in order to give you a wider field of view behind you, as most towing mirrors do.
We do offer a set of similar universal towing mirrors from CIPA, part # 7070-2, or part # 7070 for a single mirror, that have flat glass. view full answer...
For the 2015 model year Ford made a lot of changes to the Expedition. Those changes carried over to the 2016 models. Brake controller manufacturers have not determined that the wiring harnesses for the 2015, in this case # 3034-P, will fit the 2016 or not.
Your Expedition may have also come with a factory brake controller harness that you can use. I want to say that the usually stow it in the glove compartment. If you have that harness you can use it. The brake controller will have to... view full answer...
We have some Universal Fit Towing Mirrors that may work for your vehicle (see link). Two of our best selling options are the K-Source Universal Clip-On mirror, part # KS3891 and the Cipa Deluxe Door Mount Mirror, part # 11650. The mirrors are sold individually, and can be used on either the driver or passenger side of the vehicle.
At this time we do not have a custom fit towing mirror available for the 2010 Ford Expedition. view full answer...
I checked with all of the various manufacturers who provide us with the slide-on towing mirrors, and found that none of their offerings were compatible with the mirrors on the 2010 Expedition. My research indicates that the 2008 Expedition and the 2010 model used different mirrors, so a slip-on mirror for the 2008 like the # CM11900 would not fit a 2010 model.
For your 2010, we have some universal-fit mirrors that would work for you. I would recommend the K-source Universal Towing Mirror,... view full answer...
We have folding cargo carriers with ramps which work great for transporting mobility scooters, but we do not have any that are "lightweight" as the have to be reinforced for strength as well as the ramps add quite a bit of weight. Most of them are made of steel and heavy. However, I do have a solution for you.
We have the Flint Hill Goods 30x50 Wheelchair Carrier # FHG77ZR which would work well. It has a capacity of 500 lbs, has a built 48" in ramp, is folding and has inside dimensions... view full answer...
The reason there are no aftermarket hitches available for your 2015 Ford Expedition is due to Ford equipping them all with hitches from the factory. With that said, the hitch is completely hidden when not in use as there is a panel in the middle of the bumper that encloses it for protection from the elements. I included an image of what I mean, but this is of a 2010 Ford Explorer, so it will be slightly different on your 2015 Expedition. The concept will remain the same though.
This is... view full answer...
Unfortunately, there are no custom slip over mirrors available for the Eddie Bauer edition of the 2001 Ford Expedition that have mirrors with integrated turn signals. We do have many several custom fit towing mirror options for you. I have provided a link to those for your reference.
We also have the CIPA Deluxe Door Mount Mirror, # 11650, that attaches to the door of the vehicle. These universal mirrors are good for easy on and off installation if you do not want extra mirrors attached... view full answer...
Go To Results