The Truxedo Truxport you have on your 2010 Ford Ranger is the part # TX250101 which means the correct part number for the rear header would be the part # TX250101-REARHEADER. view full answer...
You can always expect a reply from us here at Etrailer! I have a solution for you, however, there unfortunately is not a roof rack custom-made for the 2010 Ford Ranger standard cab. Instead, there are two routes that come to mind for you to haul your kayak on the roof.
Option 1: Thule TracRac TracONE Ladder Rack w/ Cantilever - Fixed Mount - 800 lbs - Silver # TH27000XT-EX. This is a ladder rack with a cantilever that hangs over the roof, acting as a roof rack. With the three crossbars,... view full answer...
I recommend the Curt Channel Style Adjustable Ball Mount # C45900. This fits a 2-inch hitch, has both 2-inch and 2-5/16-inch balls and offers a height range of 6-inches of drop up to 5-inches of rise. It is rated for 14K. For a locking hitch pin you can use # C23519.
Please refer to the linked video for further illustration of this product. view full answer...
I believe I have a solution for you, but I checked with Roadmaster and they cannot confirm a base plate fit for your 1996 Ford Ranger Splash because they have only had a chance to fit the the Splash models from 93-94.
I checked with Blue Ox and they confirmed that their base plate kit part # BX2117 would work on your 96 Splash Ranger.
A popular tow bar with Ranger owners is the Blue Ox Alpha Tow Bar # BX7380. This is a non-binding tow bar that will be much easier to use than most. This... view full answer...
There is a Bestop Supertop Collapsible Bed Cover available for a 2006 Ford Ranger if it has the 6 foot non-stepside bed. The part # is B76302.
For installation details, click on the provided link. view full answer...
We do indeed have a 2-inch front-mount hitch receiver for the 2011 Ford Ranger Sport 4x4 Extended Cab (and thanks for providing the details about your truck).
Curt hitch # C31063 fits trucks without a front cross-member so you'll want to check before ordering. Also, if the Ranger has a skid shield it will have to be removed. It installs without drilling and includes all required hardware. A helpful article on hitch installation is linked for you along with the written instructions.
I... view full answer...
For a base plate kit you will need the # 431-1 for your 1992 Ford Ranger. Since you have a Draw Tite tow bar the correct adapter will be the part # RM-025.
I attached a couple flat towing help articles for you to check out as well. view full answer...
Nobody makes a custom fit front hitch for the 2019 Ford Ranger. If you don't want to install a universal weld-on hitch like the # 41990-07 the other option would be to have a hitch fabricated specifically for your truck. You can take the Curt Weld-On 2" Receiver for Custom Fabricated Hitches # E17 to a local fabricator and have them fashion a front hitch that will allow you to use your snow plow. view full answer...
I confirmed with my contact at Curt Manufacturing that their 2-inch Class III hitch part # 13138 is a fit on your 2000 Ford Ranger Stepside. The linked installation video illustrates the mounting process on a 1999 Ranger. Drilling is required.
The recommended ball mount to use with it is part # C45030 and with it you can use 2-inch hitch ball # 63845. For a wiring harness use part # 118344 which is a simple plug-in installation at the truck's taillights. view full answer...
The Supertop for your 2006 Ranger is only offered in black. The zip-in vinyl windows are included, there used to be a mesh option that is no longer available at this point.
According to the instructions from Bestop, the following tools are required for installation:
Tape Measure
Phillips Screwdriver
7/16 Wrench
9/16 Wrench
Power Drill with 1/8 inch bit
Center Punch
Scissors
Utility Knife view full answer...
Yes, we do have a Rhino-Rack side loader. For that accessory, you need the Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading # RR-RUSL.
In order to use the Universal Load Assist, you will need a crossbar system and a kayak carrier on your 2021 Ford Ranger (bare roof). For a great compatible crossbar system, I recommend the following parts:
- Thule SquareBar Evo Crossbars - Steel - 53" # TH712400
- Evo Clamp Feet for Thule Crossbars - Naked Roofs # TH710501
- Fit Kit for... view full answer...
Yes, there is a plug in style wiring option for your 2022 Ford Ranger without tow package to provide a 7-way trailer connector.
- T-One Vehicle Wiring Harness # 22124
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located beneath the vehicle, on the driver's side. It does not require cutting or splicing.
If you need a 4-way as well, you can pick up the Pollak 7 Pole to 4 Way Connector Adapter # PK12716 which adapts the 7-way into a 4-way. view full answer...
That's a good question. We do have the Blue Ox Patriot part # BLU37TR. The # BLU37TR is there newest supplemental braking system offering from Blue Ox. view full answer...
You can absolutely install the Redarc Tow-Pro Liberty # RED24FR in your 2019 Ford Ranger that has the Curt 7-way Connector Harness # C56431 installed, you will just need the universal wiring harness # RED69FR.
While Ford did not run a trailer brake controller port for installing a trailer brake controller like some other vehicles have, they did run the four wires you need. These will be located underneath the dash near the driver side wheel well and will be bundled together.
Inside the... view full answer...
You may be able to use the Hopkins EasyLift Truck Bed Tailgate Lift Assist # 74211 for your 1993 Ford Ranger. This is a universal fit which will involve drilling holes into your Ranger. There currently are no custom fit tailgate assist devices for your Ranger. view full answer...
The K-Source Universal Towing Mirrors, # KS69ZR are a confirmed fit for the 2019 Ford Ranger. If you need to remove easily to get into tight spots then this is a good choice. Another good option is the CIPA Universal Dual Lens Towing Mirrors - Clip On - Qty 2, # 11953-2. view full answer...
The Greystone Standard RV Microwave, # 324-000106 is 19" wide x 12" tall x 14-1/4" deep without the trim kit; the trim kit dresses it out to 23-3/8" wide x 15" tall. The trim kit is not required, you can set this on a counter top.
We have the Furrion Over the Range RV Convection Microwave rated at 1,500 Watts, # FMCM15SS that has overall dimensions of 29-15/16W x 16-3/8T x 15D. view full answer...
The Curt Pintle Hook Mounting Plate # C48341 was only designed and engineered by Curt to be used in the drop position. I recommend using the Convert-A-Ball Cushioned, Adjustable Pintle Mounting Bar # AMPC3 if you need a mounting plate for use in the rise position. This mount has a cushion built into the hitch to help reduce shock transferred from the trailer to your tow vehicle. view full answer...
I have a solution for you to add some suspension help on the rear end of your 2019 Ford Ranger, but Roadmaster does not make a rear anti-sway bar for that particular vehicle. Typically the Roadmaster suspension enhancement parts are only available for Class A or Class C RV or heavy vehicle chassis'. However, a really easy to install and helpful suspension enhancement for your Ranger that I recommend is the SumoSprings Solo Custom Helper Springs - Rear Axle # SS86MR.
These helper springs... view full answer...