The Thule Wingbar Evo roof rack for your 2018 Audi Q5 part numbers # TH711320, # TH710601, and # TH186045 would be the best for attaching the Thule Hullavator # TH898 to. The Hullavator would easily fit into the top channels of the Wingbars for a clean and solid connection. view full answer...
We do; I was able to verify for you the etrailer Trailer Hitch # e94CR is a confirmed fit for your 2021 Audi Q5 PHEV.
For trailer wiring on your '21 Q5 the no-splice ZCI kit part # 119250KIT is a great solution that does not require cutting into the wiring at all. view full answer...
As long as your 2018 Audi A3 Curt # C11399 you'd looked at because its not recessed as far under the vehicle, which makes it easier to find compatible hitch mounted accessories like bike racks. In order for a hitch mounted accessory to be compatible with this hitch, it must have a shank on it that measures longer than 6-1/2 inches, measured from the center of the hitch pin hole to the closest upright portion of the hitch accessory. If your accessory has a shorter shank than that, the upright... view full answer...
If you use a hitch adapter to change hitch size from 1-1/4 inch to 2 inch the result is that the hitch loses 50 percent of it's tongue weight capacity due to added leverage and movement. Instead the better option would be to go with a 2 inch hitch that fits your 2018 Audi Q3 like the part # C13238 which would not require an adapter. view full answer...
You can install a 7-way and brake controller in your 2009 Audi Q7 with the Draw Tite hitch # 75950 that you are planning on installing but you have to start with a 4-way since your vehicle isn't pre-wired for a 7-way. So for that you'd want the 4-way kit part # 119250KIT which you'd then convert to a 7-way with the # ETBC7 so that you can install a brake controller like the Brake EVN part # TK63VR. view full answer...
I have a few options for you, but the Thule Velo Vise 589 you have can only be installed onto factory aero crossbars by using the Thule Ride On Adapter 532 which has been discontinued for quite a few years now. If you can find two of the then you can install them onto the crossbars on your 2018 Audi Q3, then install the bike rack on those.
You could replace the factory crossbars on your Q3 with the Thule Roof Rack System which uses 47" Thule SquareBar Evo Crossbars # TH712200 and Evo Flush... view full answer...
The CURT Class I, II, and some Class III trailer hitches require the use of a stabilizer strap, # 18050, in order to be in compliance with CURTs warranty requirements. The strap is meant to relieve some of the stress from the hitch when used for any non-trailer load such as a bike rack or cargo carrier. Other manufacturers do not require a strap.
For your 2010 Audi A4, I recommend the Draw-Tite Trailer Hitch, # DT24950. This is the most popular hitch for your vehicle. I have included a... view full answer...
I suggest the Stealth Hitches Hidden Rack Receiver, # 391AUDQ518 for your 2022 Audi Q5. This completely hidden hitch keeps your Audi Q5 looking like it just came off the assembly line. You can remove the receiver for a fully concealed look when you're not carrying your bikes. This won't affect ground clearance or block your trunk's foot-access sensor. It is a simple, bolt-on installation - no drilling or welding required.
If you do not already have a bike rack, I suggest you consider... view full answer...
For your tire size of 235/60-18 we do have a set of Konig Self-Tensioning snow chains with the part # TH01594247 that fit, but the part number you mentioned is not correct for your tire size. view full answer...
The Stealth Hitches # SH39FR is an accessory package for the Stealth Hitches # SH34FR hitch and receiver for a 2021 Audi E-Tron. The SH34FR has a 2" receiver for your bike rack. If you only need to haul your bike rack then you only need the SH34FR. If you want to additionally tow a trailer then you additionally need the SH39FR package. The nice thing is that when not in use the receiver or ball mount removes entirely so nothing is seen behind the vehicle.
If you are going to tow a larger... view full answer...
As long as the 7-way round you have on your trailer is wired so that the stop/turn circuits are on the same circuits the # 47405 would be perfect for what you are trying to do.
If the 7-way you have is a Euro style that has separate taillight circuits then you would need to make an adapter, but I doubt this is this case.
If your 7-way is wired like the diagram I attached you would be good to go. view full answer...
For your 2018 Audi Q5 the Draw Tite hitch part # 76183 is a really great option for carrying a bike rack. It has great weight capacities, is mostly hidden, and is also priced great.
I am not sure what type of bike rack will suit your needs the best but the Hollywood Racks Trail Rider part # HR200Z is a great option to carry 2 bikes. It's a platform rack which means it's easier to load/unload and holds the bikes more secure than hanging racks and also in it's price range it's the most stable... view full answer...
If your 2018 Audi Q7 came with the factory towing package then I recommend the etrailer Ball Mount Kit # 989900. It includes 2 separate draw bars with 2" or 4" of drop to accommodate different height trailers. Also included are a 2" and 1-7/8" ball to match the trailer. It all stores away nicely in a convenient carry bag.
If your Q7 requires a Trailer Hitch Receiver the etrailer # e88KR is a great option. It will require no drilling but some trimming of the fascia. The Tekonsha Vehicle... view full answer...
You are correct, the Draw-Tite # DT68MR has a visible cross tube so you will see it once installed on your 2021 Audi Q3. In order to maintain a factory look, I recommend the Stealth Hitches Hidden Rack Receiver # 391AUDQ319. This hitch as a hidden cross tube so you will only see the receiver hanging down on your Audi. The receiver also detaches when not in use so the hitch will not be seen at all. This has a 600 lb tongue weight capacity for your bike rack.
The only downside to this hitch... view full answer...
There are options for carrying bikes on your Audi Q5 that allowing access to the rear door. However, Thule does not list any of their trunk mounted bike racks as a fit for your vehicle. There is not a safe location to mount the top straps to support the weight of the bike rack.
Instead, I would recommend adding a trailer hitch and a hitch mounted bike rack. For a trailer hitch, I recommend the Draw-Tite Max Frame Class III Hitch, # 75940, and some of our most popular bike racks are the... view full answer...
For your 2016 Audi A4 I recommend Draw-Titehitch # DT24950. This is a Class I trailer hitch with a 1-1/4 inch receiver.
If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. view full answer...
Since you have the Audi crossbars on your 2021 Audi Q5 I recommend measuring the width of the crossbars along with the crossbar spread, which will determine compatibility of a roof-mounted bike rack. Crossbar spread is a measurement from the center of one crossbar to the center of the next crossbar (see attached photo).
The Rhino-Rack Hybrid Roof Bike Rack - Wheel Mount - Clamp On - Aluminum # RRRBC050 fits crossbars that are no more than 3-1/2" wide and fits a crossbar spread of 21-5/8... view full answer...
I checked with Thule and they have their WingBar Evo Roof Rack part numbers # TH711200 and # TH710401 as a confirmed fit which will work great. This doesn't use a rubber strap to secure to the raised rails of your 2003 Audi Allroad Quattro either like you mentioned.
If you can let me know what lock number you have I can check to see what you'd need to key this rack to the same key number as what you have now. view full answer...
The best roof rack that meets your preferences is the Rhino-Rack Vortex SX rack system made of parts # RRVA126B-2 and # RRSX100.
This provides a 165-lb weight capacity on your A4 and their aero crossbars will accept both standard accessories that clamp around the bars and those that use the T-slot in the tops of the bars, such as Lockrack Kayak Carrier # LR54FR. view full answer...
If your Audi Q5 has a roof rack with crossbars that measure 4 inches or less in diameter that can be adjusted so that they are 25-7/8, 27-7/8, or 29-7/8 inches apart, the SportRack Vista XL Cargo Box, part # SR7018 would work well for you.
The Vista XL is a sturdy box that is bargain priced. The box will offer some water resistance, but we recommend any items placed in it be placed in plastic to provide additional protection.
If your Q5 is not equipped with crossbars, they can be added... view full answer...
Go To Results