The issue is that the sunroof of your 2017 Audi Q3 tilts up a bit when it opens which would interfere with a roof rack. The other thing too is that roof racks and open sunroofs are very noisy. If you were to open it with the rack installed (if it were possible) the amount of noise created would make you want to close it anyway. Best option is to install and remove the rack as needed.
The roof rack that creates the least amount of wind noise is the Thule WingBar roof rack part numbers... view full answer...
I spoke with my contact at Curt and he informed me that the Curt Hitch part # C12148 that you referenced is a fit for the Quattro models of the Q3 as well. He said no models of the Q3 were excluded. view full answer...
If you use a hitch adapter to change hitch size from 1-1/4 inch to 2 inch the result is that the hitch loses 50 percent of it's tongue weight capacity due to added leverage and movement. Instead the better option would be to go with a 2 inch hitch that fits your 2018 Audi Q3 like the part # C13238 which would not require an adapter. view full answer...
The ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT is a great option if you don't want to splice into your factory wiring. This harness allows you to capture the wire electrical signals with zero contact interface sensors. The kit comes with a circuit tester so you don't need # PTW2993 but that is definitely a better option. You mechanic should have a better circuit tester than the one that comes in the kit, but that one... view full answer...
We checked with Curt and they have confirmed the wiring harness part # C59236 as a fit for your 2016 Audi Q3 so it would work well for you. view full answer...
Most spoilers at the tops of SUVs and CUVs are not rated to support any weight or tension. But, Curt is the only manufacturer that would require that strap. Draw-Tite hitch # 75218 does not have that requirement so I would go with it and not worry about the strap on your 2015 Audi Q3.
I have included a link to all of the bike carriers we have that fit 2 inch trailer hitch receivers. The most popular option is the Hitching Post Pro, # TH934XTR. I have included a link to a video review for you. view full answer...
The Rightline Gear Cargo Hatch Saddlebag - Waterproof - 13 cu ft - 40" x 20" x 28" # RL100B90 will attach to a roof rack, but it is also able to be used without one using the Car Clips for Rightline Cargo Hatch Saddlebag - Qty 2 # RL100605. If you choose to use the clips it will not change the roof rating capacity of your vehicle, so this may be helpful if you are already close to that capacity limit with other cargo.
I recommend using the Cable Lock for Rightline Cargo Bags - 35" Long... view full answer...
We do have trailer hitch options for your 2020 Audi Q3. If you plan to tow a trailer, your best bet will be to go with the Stealth Hitches Class 4 Trailer Hitch # 391AUDQ319T. This hitch is capable of towing up to 6,000 lbs, and 600 lbs of tongue weight. So more than enough for either of the trailers you mentioned. The Stealth Hitch also features a removable receiver, so the hitch will be completely hidden when not in use. This also includes your ball mount, and the necessary trailer wiring... view full answer...
We have the Roadmaster High Low Adapter part # RM-076 which will give a 2 inch hitch like the # C13238 you mentioned a 6 inch raise to help with ground clearance. You'd need to note that this adapter cuts the capacity of the hitch it is installed in by 50 percent. view full answer...
For your 2016 Audi Q3 the best hitch we offer for towing a small trailer is the Draw Tite part # 75218 which is a confirmed fit 2 inch hitch. For trailer wiring you'd then want the part # 119250KIT.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage... view full answer...
I have a few options for you, but the Thule Velo Vise 589 you have can only be installed onto factory aero crossbars by using the Thule Ride On Adapter 532 which has been discontinued for quite a few years now. If you can find two of the then you can install them onto the crossbars on your 2018 Audi Q3, then install the bike rack on those.
You could replace the factory crossbars on your Q3 with the Thule Roof Rack System which uses 47" Thule SquareBar Evo Crossbars # TH712200 and Evo Flush... view full answer...
For your 2016 Audi Q3 I recommend Curt trailer hitch # C13238. This is a Class III trailer hitch with a 2 inch receiver rated for 525 pounds tongue weight and 3,500 pounds gross trailer weight. I have included a link to the installation instructions for you.
To add a trailer connector I recommend # C59236 which will provide a 4-Way flat connector at the rear of the vehicle. view full answer...
Trailer hitches and vehicles have their own tongue weight and gross trailer weight capacities. As such you must go by whichever is lower. Draw-Tite trailer hitch # 75218 is rated for 450 pounds tongue weight so a combined weight of 350 pounds is no problem for the hitch.
It looks like the tongue weight capacity of your 2016 Audi Q3 is 400 to 440 pounds. Consult the vehicle owner's manual to confirm. If the vehicle tongue weight capacity is lower than the hitch then you go by the vehicle... view full answer...
The Stealth Hitches Hidden Rack Receiver part # 391AUDQ319 is my recommendation for a 2019 Audi Q3. It has a removable receiver tube for a completely hidden install while not in use and a 2" opening so there are plenty of bike racks to choose from. I recommend the Thule EasyFold XT Bike Rack for 2 Electric Bikes part # TH903202 as the best electric bike rack option due to the integrated ramp for loading and wheels for help to and from the vehicle. view full answer...
For your 2016 Audi Q3 Quattro I recommend the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # SH94FRT. It also includes the wiring needed to add a 4-Way trailer connection. When not in use you can remove the receiver tube or ball mount for a completely hidden hitch. The hitch is capable of supporting up to 350lbs of tongue weight and 3500lbs towing capacity (be sure to consult the vehicle manual or manufacturer for your exact rating).
The Carrying Case # 391CASEC is a great... view full answer...
I checked with my contact at Draw-Tite and was able to confirm that the Draw-Tite Trailer Hitch Receiver # 75218 you were looking at is a confirmed fit for your 2016 Audi Q3 Quattro Prestige.
This hitch has a 450lb tongue weight rating and 4500lbs trailer weight rating making it a great all around hitch for carrying a bike rack or cargo carrier, or using a ball mount to tow a trailer.
If you will be towing a trailer you will also need a vehicle wiring harness # C59236 and a ball mount.... view full answer...
The Towing Kit w/ Ball Mount and Trailer Wiring for Stealth Hitches Hidden Rack Receiver # SH82VR does come with two sets of safety chain loops that attach to the block of the Stealth hitch # 391AUDQ319 as well as two different sets of bolts to hold them on. You'll notice that the holes for the safety chain loops are two different sizes based on the diameter of the two sets of included bolt diameters.
I linked the install instructions for this for you to check out as well. view full answer...
Yes, the only option for the 2021 Audi Q3 that still allows the hands-free tailgate to fully function as designed is the Stealth Hitches. There are two options, you can have just a rack receiver for accessories such as bike rack or carrier, Stealth Hitches Hidden Rack Receiver # 391AUDQ319, if you do not plan on towing. Or, the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit, # 391AUDQ319T if you do plan on towing. view full answer...
I recommend using the Curt # C13238 which will give you a 2" receiver capable of carrying your Thule Easy Fold # TH903202. Curt hitches have a nice, durable powder coating so this hitch will stand up better to nicks and scratches than some other hitches so it's a great option that won't break the bank.
I've linked a review and installation video of this hitch for you to check out, as well. view full answer...
Yakima has confirmed that the Yakima FullBack 2 Bike Rack # Y02634 is a confirmed fit for your 2021 Audi Q3 and has been tested with the spoiler and the straps did not scratch it. view full answer...
Go To Results