Thinline LED Trailer Utility Light - Submersible - 6 Diodes - Rectangle - Clear Lens

See what our Experts say about this Optronics Work Lights

• Wiring and Accessories Needed to Add Backup Lights to a Boat Trailer
  You are going to want to run a separate wire from the new back up light(s) to the trailer connector. Depending on the type of trailer connector is on the trailer and on the vehicle you may need different connectors or adapters which I can help with. I just need to know the type of connector on the trailer and tow vehicle. For wire you can use # 16-1-1 which is sold in increments of 1 foot. So it you needed 20 feet you would enter 20 in the quantity box. I also recommend using wire frame...
  view full answer...
• Replacement Clear Lens and White Lights for Running Boards on a 2008 GMC Sierra
  Surface mount LED utility light # UCL19CB might be a good option for you. It is a surface mount light so it will attach directly to the mounting surface and no additional bracket is needed. This LED light is sealed and waterproof as well. Another option is # UCL65CB. You would need mounting bracket # A65PB for black or # A67CB for chrome. I have linked a video review of this light for you.
  view full answer...
• Clear Submersible Marker Light to Replace Light on Boat Trailer Used as Reverse Light
  A license plate light such as # LPL91CB could work for you. It is 2-1/2" x 1-1/4". For something a little larger you could use # UCL65CB with mounting bracket # A65PB. The light is 4" long x 1-1/4" wide x 1" deep. We do have actual reverse lights, such as # BUL10CB, which is submersible. You would need to use pigtail # A47PB and a mounting bracket, # BK70BB, with grommet # A70GB for installation though.
  view full answer...
• Replacement Clearance Lights 1-1/4" Tall, 3-15/16" Long and 7/8" Deep With 2 Prong Connectors
  We have the Optronics Incandescent # MC65RB and Optronics Thinline LED # MCL75RB that use a red lens. The Optronics Incandescent # MC65AB and Optronics ThinLine LED # MCL75AB have an amber lens. A Optronics ThinLine LED # UCL65CB uses a clear lens with red LED's, and the Optronics ThinLine LED # MCL65CAB is a clear lens with amber LED's. We will not have any with a white light and clear cover.
  view full answer...
  
• Recommended While LED Lights with Clear Lens for Courtesy Lamps
  We do not carry and clear lens with white LED in that # AL91CAB size. You may want to consider instead using the Optronics Sealed LED Utility Light - 2 Diodes - Clear # UCL13CPG or the Thinline Sealed LED Utility Light - Clear - 6 Diode # UCL65CB as an alternative. Another option is the Sealed Waterproof LED Utility Light # UCL19CB for a polished housing.
  view full answer...
• Wiring Guide for Installing Optronics Thinline Sealed LED Utility Light # UCL65CB
  The LED light you referenced, Optronics Thinline Sealed LED Utility Light # UCL65CB, installs using a mounting bracket # A65PB. This base has a single wire lead for the +12V input; the ground connection is made through the mounting hardware. With the base mounted so that its grounding stud makes contact with bare metal on the trailer frame, you'll then need only to connect the one wire lead to the reverse light circuit on your trailer. You can use a circuit tester like # PTW2993 to confirm...
  view full answer...
• Is Thinline Sealed LED Utility Light, # UCL65CB Submersible for Use on the Back of a Boat Trailer
  The Thinline Sealed LED Utility Light, # UCL65CB, is a sonically sealed waterproof lens and housing so it can be submerged. To mount this light you will also need bracket. You can use Black Bracket and Single Wire Plug for Thin Line Series Trailer Clearance and Side Marker Lights, # A65PB. Or, you can use Chrome Bracket and Single Wire Plug for Thin Line Trailer Clearance and Side Marker Lights, # A67CB.
  view full answer...
• Do I Need A Mounting Bracket To Install Optronics Thinline Sealed LED Utility Light # UCL65CB
  I contacted our representative at Optronics and she confirmed that you must use a mounting bracket with the Thinline Sealed LED Utility Light, part # UCL65CB. The light will plug into the mounting bracket and is grounded through the attachment hardware to the trailer frame. For a black bracket, we have the Black Bracket and Single Wire Plug, part # A65PB. For a chrome bracket, we have the Chrome Bracket and Single Wire Plug, part # A67CB.
  view full answer...
• What is the Amperage Draw for Optronics Thinline Sealed LED Utility Light, # UCL65CB
  According to Optronics, the Thinline Sealed LED Utility Light, # UCL65CB, draws 0.048 amps at 12.8 volts. The recommended mounting brackets for this light are Black Bracket, # A65PB, or Chrome Bracket, # A67CB.
  view full answer...
• If Trailer Light Is Sealed/Waterproof Why Does Boat Trailer Have to Be Unplugged Before Submerging
  The light, # UCL65CB, is waterproof since it is a sealed LED. But the wiring on a trailer isn't necessarily waterproof. To avoid any possibility of a short due to water unplugging the trailer before submerging it is the way to go.
  view full answer...
• Recommended White LED Utility Light Similar to Optronics # MCL63AB
  The closest option we have available to the Optronics Micro-Flex Thinline LED Clearance Light # MCL63AB that uses a white lens is with the Optronics Thinline LED # UCL65CB. This waterproof rectangular LED light has overall dimensions of 4 inches long, 1-1/4 inches wide, and 1 inch deep. Its 6 LED diodes should give you a much brighter and longer lasting unit compared to your existing incandescent models. This will work great to light up your entry steps and sewage connections. I have...
  view full answer...
• Interior LED Light Recommendation for an Enclosed 5 x 12 Foot V-Nose Trailer
  I would say that you would need a minimum of 6 of the Thinline Sealed LED Utility Light, # UCL65CB, to light up the inside of your enclosed trailer. Another option would be the LED Domed Utility Light, # ILL24CB. Two or three of these should provide sufficient lighting for your trailer. You would also need to wire them together, and run them to a switch, like # BL0108-00.
  view full answer...
• LED Lights, Wiring and Mounting Brackets for Reverse Lights On a Boat Trailer
  I would use the Sealed, 6-1/2 inch LED Clear Oval Trailer Utility Light, 10 Diode, item # BUL72CB, along with the Rubber Grommet for 6-1/2 inch Oval Trailer Tail Lights, item # A70GB, and the Trailer Light Mounting Bracket for 6-1/2 inch Oval Trailer Lights, Steel - Black Powder Coat, item # BK70BB. These items should work for you and have a specific mounting bracket that is not available for the Thinline Sealed LED Utility Light, item # UCL65CB. Be sure to unplug the trailer connection...
  view full answer...
• What is the Power Draw for Optronics Thinline Sealed LED Utility Light, # UCL65CB
  According to Optronics, the Thinline Sealed LED Utility Light, # UCL65CB, draws 0.048 amps at 12.8 volts. The recommended mounting brackets for this light are Black Bracket, # A65PB, or Chrome Bracket, # A67CB.
  view full answer...

Do you have a question about this Work Light?