Thinline LED Trailer Fender Light - Submersible - 10 Diodes - Clear Lens w/ Amber/Red LEDs
(817 reviews)
Price: $13.00
In Stock
Thinline LED Trailer Fender Light - Submersible - 10 Diodes - Clear Lens w/ Amber/Red LEDs
Item # MCL65CARB
Retail:$19.16
Our Price: $13.00
You Save: 32%
In Stock
- All Info
- Reviews (817)
- Q & A (0)
- Videos (2)
- Photos
Optronics Trailer Lights - MCL65CARB
- Clearance Lights
- Rectangle
- LED Light
- Red and Amber
- 4L x 1W Inch
- Surface Mount
- Rear Clearance
- Side Marker
- Submersible Lights
- Optronics
3-15/16" x 1-1/4". Waterproof LED marker light can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket (not included). Accepts 1-prong or 2-prong plug. P2 rated.
Features:
- Dual-face LED trailer light installs on your trailer fender
- Thinline Series has a low profile so that light can fit in tight spaces
- Sonically sealed, waterproof housing and lens unit is submersible
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate housing and lens
- Clear lens over red and amber LEDs
- Compatible with 12V DC systems
- Surface mount to trailer with bracket (A65B - sold separately)
- Accepts industry standard 1-prong or 2-prong plugs
- DOT compliant
- P2 Rated
Specs:
- Dimensions: 3-15/16" long x 1-1/4" tall x 7/8" thick
- Diodes: 10
- Power draw at 12.8 volts: 0.048 amps
- Lifetime warranty on LEDs
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
MCL65CARB Optronics Thinline LED Trailer Fender Light - Submersible - 10 Diodes - Clear Lens w/ Amber/Red LEDs - P2 Rated
Alternate part number: MCL-65CARB
California residents: click here
Video of Thinline LED Trailer Fender Light - Submersible - 10 Diodes - Clear Lens w/ Amber/Red LEDs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Optronics Fender Clearance Trailer Light Review MCL65CARB
Today we're going to be taking a look at the Optronics Fender Clearance LED Submersible Trailer Light, part number MCL65CARB. This trailer clearance light lights up red in the rear and amber in the front. It's going to help you remain DOT compliant for trailers over 80" wide. You want to be sure and pick up 2, 1 for either side. You can simply mount it to the top or side of your fender to help you highlight your trailer's widest point. It has a sonically sealed waterproof housing and is completely submersible, and because the lights are LEDs, it's going to be more efficient and last a long time. It's a very easy installation, if you don't have a base or a wiring harness, we have one here at etrailer.com, you can pick it up with part number A65PB.
When putting your light on, you want to be sure and identify which is the rear and which is the front, so there's a little sticker on the back for the red, which we want to have pointing toward the rear and we just simply line up the plugs, and push it in place. Listen for the snap on the front and rear, and then we've got it. Let's try it out. Looks great. If anything we're to ever happen to the LEDs, they feature a lifetime warranty. That's going to complete our look at the Optronics Fender Clearance LED Light, part number MCL65CARB..
Customer Reviews
Thinline LED Trailer Fender Light - Submersible - 10 Diodes - Clear Lens w/ Amber/Red LEDs - MCL65CARB
Average Customer Rating: 4.9 out of 5 stars (817 Customer Reviews)
3-15/16" x 1-1/4". Waterproof LED marker light can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket (not included). Accepts 1-prong or 2-prong plug. P2 rated.by: Neal12/10/2018
It took me a while to find a clear lens fender marker light. It shouldn't be a big deal but I just thought the amber/red lens lights look stupid. I have been very happy with these products. They deliver a fairly bright light. I had hoped once illuminated they would be more defined red/amber but what can you do. It is still more than adequate for safety purposes. As other reviewers have stated, be careful with your mount screws. If they protrude too much, this light doesn't want to snap into place. One of my fenders went just fine. The other took a little persuasion. I would buy them again if they fail.
by: Stacy C.10/04/2014
I got tired of replacing burned out bulbs way to often. I decided to replace all my lights with LEDs and be done with it. The install of the thin line marker lights couldn't be easier, one wire hook up and grounded by the mounting screw. You will need the base which is sold separately. As for the brightness, I would estimate three times the light output of the replace incandescent bulbs when they worked. Plus you get a free light mural on the side of your trailer at night. How can you beat that? Etrailer.com was amazing as always.
by: Richard01/11/2014
After changing all the red and amber marker lights on my trailer to optronics clear lenses (from etrailer) I had been waiting on a clear lenses (amber/red) fender light. You got it and I did it. Thanks you guys have been my go to outfit and I am on my second trailer.
by: Amber02/02/2023
Average light output
by: Carl05/14/2022
Great service! Love the lights
by: Douglas 09/07/2021
Exactly what I expected from a trailer supply warehouse!
by: Josh O.01/05/2017
Fast shipping on this order. The lights are a lot brighter than I expected, which is great. Thank you very much. Will do business again.
by: Al04/02/2022
Haven't installed these yet , but they are as described.
by: Mike06/17/2019
Arrived as promised.
by: paul01/17/2013
looks better than i thought they would
by: Troy 02/08/2024
by: Trent 07/04/2023
by: Francisco04/16/2022
by: Ronald 05/16/2023
by: Nathaniel 05/14/2023
by: Blaine 04/17/2023
by: Rod 07/09/2021
by: Mark 03/02/2021
by: Michael 04/29/2024
I needed a new one after someone did a hit and run on horse trailer fender. It fit perfect
by: Judah03/23/2024
Direct replacement on my Circle J horse trailer fender.
by: Sotero12/28/2023
Perfect replacement fit. Thank you Etrailer for the help and the outstanding customer support.
by: William 10/05/2023
Perfect, exact replacement fender lights for my 2007 Pace American motorcycle trailer. Even the DOT numbers on the lens matched the numbers on the original lights that came on the trailer.
by: Bill05/19/2021
You can always depend on etrailer.com to have a trailer part when no one else has it.
The side clearance lights on my dump trailer didn't work due to corrosion and I decided to replace the complete unit (yes, the lens and base) to the brighter LED lights. I needed the red/amber lens to match the old incandescent lens and after searching local stores and only finding the amber lens, my next search was with a reliable site that I've used many times.
etrailer.com had it (them, I replaced both sides), priced reasonably, (a little slow on shipping, but finally received them), no alterations were needed for the installation, added some heat shrink wrap around the connections and they worked perfectly.
I might add that etrailer.com is an excellent site for the "do-it-your selfers". Take advantage of the videos of any item that you are buying and the installation videos give you a little more confidence in an unfamiliar situation.
by: John08/20/2022
These fender lights are perfect replacement for my Aluma trailer! I had a cracked one so I bought two so they’re both new awesome product. Trailer always has the perfect parts or replacements I need for my numerous trailers. Thanks!
by: Charles T.04/10/2012
Knowing that a Black trailer would be hard to see at night the following lights were added to my custom built trailer for night time safety.
1- Side mount red and yellow fender light which only works when either the brakes or turn signal are in use.
2- Front Clearance lights, which give additional lighting at night when approaching on coming vehicles.
25
814
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Availability of Trailer Taillights # MCL-65CARB and # MCL-65CRBWe do have that taillight part # MCL65CARB and the # MCL65CRB you are looking for. Our part numbers just don't have the dash in them.
view full answer... - Amount of Diodes the Optronic Trailer Clearance Light # MCL65ARB HasYou are correct, the Optronics Trailer Lights # MCL65ARB does have 10 diodes. Six in the middle of the light and 4 on opposite ends of the light. Check out the picture I attached that shows them all lit up.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Video Edited:
Jacob T
Video by:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Wilson B
Updated by:
Ronnie R
Updated by:
Brian T
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.