Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
2-1/2" x 1-1/4" x 13/16". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Surface mount - requires bracket (sold separately). Accepts standard 2-prong plug.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the internal components.
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Optronics LPL91 series sealed license plate light. This license plate light features a sonically sealed waterproof design and it is designed for use with license plate bracket part number LP25SB which is sold separately and available at etrailer.com and it can also be used with other designated license plate brackets as well. It has the tabs here on the side so that way it easily snaps into place on the license plate bracket that's designated for use with this light and it holds securely in place. You'll notice that it is a two-wire design and that runs to this female PL-10 plug. This would be used in conjunction with a plug that looks like this, a PL-10 male plug. Not included so if you don't have that you could definitely just cut this off, strip back the wires for hardwired applications.
In that situation your white wire would be your ground wire and black wire would be for power.The light contains a total of two LEDs. Now, LEDs are great replacements for incandescent lights. They last longer, they burn brighter and they are much more efficient. You don't have to worry about replacing bulbs or worry about brittle filaments with LED systems. This unit contains a polycarbonate lens and housing.
It's very strong and durable. It's SAE and Department of Transportation compliant. A few measurements to go over with you real quick and then we'll hook it up to power. That way you can see what it looks like with some power running to it. Overall length measurement going this direction, outside edge to outside edge, is about 2-5/8 inches.
Overall width, it's about 1-3/16 to an 1-1/4, right in that area. The overall thickness or depth from very top to very bottom is about 13/16 of an inch.We're going to go ahead and hook it up to power and then we'll also turn off our overhead lights. You can see it in a lower light setting. So here you can see it sends out a nice, bright, consistent signal. This would be angled down which would broadcast that bright, white light towards the license plate.
Again, a 2-diode design or 2 LEDs so it optimizes the overall light output. Now, when it comes with a power draw at 12.8 volts, we're looking at 0.027 amps and Optronics also puts a lifetime warranty on the LEDs. That's going to do it for today's look at the Optronics LPL91 series, sealed license plate light.
Average Customer Rating: 4.8 out of 5 stars (24 Customer Reviews)
2-1/2" x 1-1/4" x 13/16". Waterproof trailer light illuminates your license plate. Clear lens under polycarbonate housing. Surface mount - requires bracket (sold separately). Accepts standard 2-prong plug.This light needs some sort of adapter plate to mount to anything. As sold it is worthless. I don't know what plate it needs or where to source it. Every other trailer light I purchased came complete.
The led lights at etrailer are the best you want quality that's were to go. I've bought others rset at others retailer they dont stand up to one I bought from etrailer.
Thanks
Finally a led light that I don't have to worry about the bulb burning out less than a year. I had the hardest time finding this light for my trailer license plate. This one had a wire then plug while the original old non-led had the plug right on the back of the light. Didn't matter but worth mentioning. Installation was easy just as any other lights, just plug and go. Nice white light.
It was great talking with polite, knowledgeable people that really do want to help you. Thank you very much!
One of the few 15 series lights you can get with white LED's. Fit was as expected. Connected right up with existing PL connection via the included pigtail. As you can see in the photos, this connection is outboard of the light rather than being right on the back of the light like the light it replaced. Of course, that light wasn't LED.
Also, in case your wondering, my light did not have the etrailer decal on it like the pictures show.
2006 Triton trailer:
Bought to replace original light. Delivery was prompt and on time. The new one fit the slot with no problem. Hasn't tested it yet.
Nice led light for your license plate with great shipping time
A little bit pricey but fast delivery.
Fit perfectly and still like new
Worked great and still is. Just what I was expecting.
great light
Great product and fit perfectly
Fits perfectly and great order delivery time!
is the best
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
4/19/2024
This light is meant to be used with part # LP25SB to attach to the trailer to be a license plate light.