Phoenix USA Rear Wheel Center Cap w/ Pop Out - 8-1/4" Hub Diameter - Clip Mount - Stainless

Video Transcript for Review of Phoenix USA Wheel Accessories - Vehicle Wheel Center Cap - PXQ247

Today we're taking a look at the Phoenix USA hub cover. This cover covers the hub on your rear wheel. You would place the hub cover on the hub before installing your tire and wheel assembly, and once installed it has a really nice clean finished touch. The center section which is this area right here, this can be removed for hub access so you have an indention right here, here and here so you could place a flat head screwdriver in there, pop the clips and remove that center section for easy hub access. It is a clip mount design, uses the three clips for attachment, clips are included. It also comes with a decal, a piece of backing so you peel that off, stick it right here in the center, gives it a finished look.

We're looking at a stainless steel construction. It's durable and rustproof and then we have a nice polished finish on the exterior to give it a great look.This is designed for the rear wheel, it fits a bolt pattern of ten on eight and a quarter. When it comes to the overall dimensions of the unit, starting with the diameter measurement, measuring edge to edge right here, straight across, it's about nine and one eighth inches. And then edge to edge right here is about nine inches. And that's gonna do it for today's look at the Phoenix USA hub cover..