Phoenix USA Rear Wheel Center Cap - 8-1/4" Hub Diameter - Center Hole Mount - Left Thread
(9 reviews)
Price: $98.09
In Stock
Phoenix USA Rear Wheel Center Cap - 8-1/4" Hub Diameter - Center Hole Mount - Left Thread
Item # PXQ2020L
Our Price: $98.09
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (9)
- Q & A (0)
- Videos (1)
- Photos
Phoenix USA Wheel Covers Hubcaps - PXQ2020L
- Center Wheel Caps
- 8-1/4 Inch Hubs
- 10 Lugs
- Stainless Steel
- Phoenix USA
- Rear Wheels
Add a touch of class to your rear wheel with this polished, stainless steel center cap. Shiny cap mounts easily over the center of your wheel's hub to protect against dirt and moisture. Fits 10 on 285mm bolt pattern.
Features:
- Wheel center cap covers hub on the rear wheel of your RV, truck, or trailer
- Gives you a clean, finished look
- Protects against dirt and moisture
- Center-mount bolt blends seamlessly into the center cap
- Polished, stainless steel construction resists rust and corrosion
- Simple, bolt-on installation with included 2-7/8" hex bolt
- Mounting bracket secures onto axle hub plate with existing hardware
- Center cap slides over hub and bracket
Specs:
- Fits: rear wheel
- Bolt pattern: 10 on 285mm
- Hub diameter: 8-1/4"
- Overall dimensions: 9-3/16" diameter x 9-1/4" tall
- Quality: 1 center cap
Q2020L Phoenix USA Rear Wheel Center Cap - 10 Lug on 285mm - Center Hole Mount - Left Hand Thread
Video of Phoenix USA Rear Wheel Center Cap - 8-1/4" Hub Diameter - Center Hole Mount - Left Thread
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Phoenix USA Wheel Accessories - Vehicle Wheel Center Cap - PXQ2020L
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Arrived Damaged
- Manufacturer issue
- etrailer mistake
Customer Reviews
Phoenix USA Rear Wheel Center Cap - 8-1/4" Hub Diameter - Center Hole Mount - Left Thread - PXQ2020L
Average Customer Rating: 4.8 out of 5 stars (9 Customer Reviews)
Add a touch of class to your rear wheel with this polished, stainless steel center cap. Shiny cap mounts easily over the center of your wheel's hub to protect against dirt and moisture. Fits 10 on 285mm bolt pattern.by: Corinne06/09/2023
Fast delivery and item as described. Perfect fit for our freightliner chassis.
by: Greg 10/06/2023
Looks great and fits perfect!
by: Paul06/28/2022
The product itself is good. However . . . The threaded rod that holds the cover on does not fit the existing bracket.
I would prefer to have a rod that fit the existing bracket to avoid removing the actual hub bolts and making sure that they are replaced and torqued to specs.
The existing bracket (left side) is PH225 L
I did not remove the right side cover, but would need that rod as well.
Please advise.
by: Carroll 05/12/2023
Great service timely shipping!
by: Lorrin10/26/2022
The part works fine. The customer service was excellent.
by: Travis03/01/2024
by: Patrick 09/08/2023
by: Richard 04/21/2021
by: Kevin 03/02/2023
9
9
See what our Experts say about this Phoenix USA Wheel Covers Hubcaps
- Construction of Center Cap for Phoenix USA Rear Wheel Center CapHey Tm! The center cap and bolt that comes with the Phoenix USA Rear Wheel Center Cap # PXQ2020L is stainless steel. The cap is removed by spinning it until the bolt is completely out. You can use the Hub Cover Wrench # PHX54FR to install and remove the cap.
view full answer... - Replacement Rear Wheel Center Caps For a 2005 Winnebago JourneyYou will need either the Phoenix USA Rear Wheel Center Cap Right Hand Thread # PXQ2010XL or Left Hand Thread # PXQ2010L if you have a 6-1/2" wide hub. Otherwise you will need the Right Hand Thread # PXQ2020 or Left Hand Thread # PXQ2020L if you have a 8-1/4" hub diameter. Based on your images it does appear you have the 8-1/4" diameter hub but this is something you will need to verify.
view full answer...
- Right And Left Hand Threaded Center Wheel Caps For A 2007 Fleetwood Discovery Motorhome For a right hand thread you'll need part # PXQ2020XL and for a left hand thread you'll need part # PXQ2020L. Both of these are designed for 8-1/4" hub diameters and a 10 lug pattern.
view full answer...
Do you have a question about this Wheel Covers Hubcap?
Info for this part was:
Installed by:
Jeff D
Installed by:
Cole B
Edited by:
Amanda M
Written by:
Adam Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
6/30/2022
You were mentioning that you would need the right-hand side. I found that part for you and wanted to pass it along in case you were still looking. It is part # PXQ2020XL