Replacement Phoenix USA Rear Wheel Center Cap - 6-1/2" or 8-1/4" Hub Diameter
(7 reviews)
Price: $58.88
In Stock
Replacement Phoenix USA Rear Wheel Center Cap - 6-1/2" or 8-1/4" Hub Diameter
Item # PXPH1843
Retail:$186.28
Our Price: $58.88
You Save: 68%
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (7)
- Q & A (0)
- Videos (1)
- Photos
Phoenix USA Wheel Covers Hubcaps - PXPH1843
- Center Wheel Caps
- 6-1/2 Inch Hubs
- 8-1/4 Inch Hubs
- 8 Lugs
- Stainless Steel
- Phoenix USA
- Rear Wheels
Replace your rusty, beat-up Phoenix USA rear center cap with this polished, stainless steel cap. Mounts easily over the center of your wheel's hub with existing hardware to protect against dirt and moisture. Fits 8 on 275mm bolt pattern.
Features:
- Wheel center cap replaces the Phoenix USA rear center cap on your RV, truck, or trailer
- Uses your existing bracket and long hex bolt
- Complete kits with hardware are available - PXQ1009, PXQ1009L, PXQ1010, PXQ1020, and PXQ1020L
- Polished, stainless steel construction resists rust and corrosion
- Gives you a clean, finished look
- Protects against dirt and moisture
Specs:
- Fits: rear wheel
- Bolt pattern: 8 on 275mm
- Hub diameter: 6-1/2" or 8-1/4"
- Overall dimensions: 9-3/16" diameter x 9-1/8" tall
- Quality: 1 center cap
PH1843 Replacement Phoenix USA Rear Wheel Center Cap - 8 Lug on 275 mm - Stainless
Video of Replacement Phoenix USA Rear Wheel Center Cap - 6-1/2" or 8-1/4" Hub Diameter
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Phoenix USA Wheel Accessories - Vehicle Wheel Center Cap - PXPH1843
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- etrailer mistake
Customer Reviews
Replacement Phoenix USA Rear Wheel Center Cap - 6-1/2" or 8-1/4" Hub Diameter - PXPH1843
Average Customer Rating: 4.7 out of 5 stars (7 Customer Reviews)
Replace your rusty, beat-up Phoenix USA rear center cap with this polished, stainless steel cap. Mounts easily over the center of your wheel's hub with existing hardware to protect against dirt and moisture. Fits 8 on 275mm bolt pattern.by: 2018 Tiffin Open Road 36UA Ford F53 26k06/01/2023
Had a hard time finding this for my RV (2018 Tiffin Open Road 36UA Ford F53 26k). Speedco damaged the hub while attempting to remove the wheel and install my Centramatics. The hub on the driver's side is reverse thread. So as they were attempting to remove the hub bolt, they were actually tightening and damaging the hub (crushed the hub inward). Took me a while to find this part online - eTrailer was the only place I could find it. I checked local truck stops, RV shops/dealers, no luck. This fits a 8 Lug, 22.5 Alcoa rear wheel (duals) - 8 1/2 hub on a Ford F53 Motorhome chassis - 26k. Hope this helps others find this part if needed.
by: Larry12/18/2023
Ashley was a Pleasure to deal with
by: Jeff 04/09/2024
by: Robert 08/22/2021
Very efficient grt service.
by: Randy 09/02/2022
by: Rick 11/16/2021
by: Rafael 09/05/2022
7
7
See what our Experts say about this Phoenix USA Wheel Covers Hubcaps
- Replacement Rear Wheel Center Cap For 2005 Winnebago RV 8 Lug WheelsI have a possible solution for you, but the Replacement Phoenix USA Rear Wheel Center Cap # PXPH1764 is actually designed to be used on 10 lug applications, not 8 lug. It sounds like Replacement Phoenix USA Rear Wheel Center Cap - 6-1/2" or 8-1/4" Hub Diameter - Stainless # PXPH1843 may work for you. This is a fit for wheels that are 8 on 275mm and it fit hubs with a diameter of 6-1/2" or 8-1/4", so if your RV matches these specs then you are good to go. This is just the cover, but if...
view full answer...
- How To Determine Fit of the Phoenix USA Center Cap For Motorhome Rear WheelThe Phoenix USA Wheel Center Cap part # PXPH1843 is a replacement for the Phoenix USA Wheel Center Cap part # PXQ1009 which is for a 6-1/2" diameter axle or the Phoenix USA Wheel Center Cap part # PXQ1020 which is for a 8-1/4" diameter axle. Therefore, if you have either of these kit then it will work for you but this would not be able to be installed on its own without the bracket and center bolt. If you don't have the bracket and center bolt then you will need to install the kit and...
view full answer...
Do you have a question about this Wheel Covers Hubcap?
Info for this part was:
Installed by:
Jeff D
Installed by:
Cole B
Edited by:
Amanda M
Written by:
Adam Y
Updated by:
Justice A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.