Replacement Phoenix USA Rear Wheel Center Cap w/ Pop Out - 8-1/4" Hub Diameter - Clip Mount

Video Transcript for Review of Phoenix USA Wheel Accessories - Vehicle Wheel Center Cap - PXPH0129

Today we're gonna take a look at the Phoenix USA stainless steel rear wheel center cap with the pop out center. Fits on 10 on 285 millimeter bolt circles. Now this part will add a nice touch of class to your rear wheel. Creates a nice finished look by covering the ugly hub with this stainless steel center cap that has a pop out on it. Again, it's designed to fit 10 lug rear hubs with a 8-1/4" diameter axle. The centered cap covers the hub on the rear wheel.

Basically what you do, you take the center cap put it into the back of the wheel before installing the whole tire and wheel assembly onto your vehicle. It adds a nice finishing touch. It includes the center cap only with the center pop out. And the center pop out is nice to have because it let's you gain access to your axle.To remove it, there's actually three indentations right here that you can put a screwdriver under and just pop it. I've already started to remove it.

So if you just pop it out just like that. The pop out allows you to gain access to the axle without having to remove the whole complete wheel, entire assembly. These parts are all a stainless steel construction, which is very durable and rust proof. Again, it fits on the rear wheel. Fits on axle diameters of 8-1/4".

Bolt pattern, again, it fits on is 10 on 285 millimeters. And then when you go to install your pop out center, you just line it up and then just tap it. And the cap will be right installed just like that.A few dimensions on this. I wanna give you the diameter. Edge to edge is right at 9-1/4" and the overall height is right at 9" tall.But that should do it for the review on the Phoenix USA stainless steel rear wheel center cap with the pop out center for 10 on 285 millimeter bolt circles..