Provider ST235/80R16 Radial Tire w/ 16" Vesper White Mod Wheel - 8 on 6-1/2 - Load Range G

Taskmaster Trailer Tires and Wheels - TA66FR

Radial special trailer tire has a 14-ply rating and a 4,080-lb max load at 110 psi. Acrylic enamel finish resists damage. Complimentary roadside assistance included. Assembly is match mounted and balanced providing longevity and a smooth ride.

Features:

• Tire-and-wheel assembly is ideal for stock trailers, utility trailers, and campers
• Match mounted and balanced for longevity and a smooth ride
  • Reduces vibration and the wear and tear it can cause
• Heavy-duty, sturdy steel wheel has a modular design
• White acrylic enamel finish resists chipping and other damage better than powder coat finishes
  • Finish is applied after a zinc phosphate pre-treatment and covers an e-coat primer layer
  • Excellent corrosion resistance with a salt spray rating of more than 1,000 hours
• Improved torque retention (ITR) technology helps to keep wheel securely in place on your trailer
  • Uncoated stud holes are beveled to offer better clamp force retention
• Radial tire is constructed with double steel belts and double polyester cords for a long life
  • Great for highway use
  • Nylon tread-firming belt overlays help prevent tread separation
  • Tread depth bars offer a quick visual indicator of tread wear
  • Tread is regroovable for additional mileage (federal and state laws may apply)
  • Bake tested to ensure that the rubber holds over time
• Special trailer (ST) tire has sturdy sidewalls so that it can handle heavy loads
  • Created specifically for trailers and not intended for use on other vehicles
• 2-Year Platinum Plus warranty includes emergency tire change service and other benefits
• Assembly meets DOT specifications and exceeds FMVSS

Specs:

• Rim dimensions: 16" diameter x 6" wide
• Bolt pattern: 8 on 6-1/2"
• Wheel bolt size: 1/2"-20 or 9/16"-18
• Wheel capacity: 4,400 lbs
• Pilot diameter: 4.88"
• Offset: 0
• Tire size: ST235/80R16
  • Section width: 9.03"
  • Outer diameter: 30.7"
• Tire capacity:
  • Load range: G
  • Ply rating: 14
  • Maximum load: 4,080 lbs at 110 psi
• Tread depth: 11/32"
• Maximum speed: 81 mph (speed rating M)
• 2-Year limited warranty

Platinum Plus Warranty with Roadside Assistance

This tire-and-wheel assembly comes with a Platinum Plus warranty that includes complimentary roadside assistance for 2 years. If your trailer has a flat tire, call the help line and a technician will come change out the flat tire with your existing inflated spare tire. The service is available 24 hours a day, 7 days a week. In addition to the roadside assistance, this warranty also includes other benefits and services.

Corrosion-Resistant Finish

The steel wheel goes through a 3-step finishing process that makes it both attractive and corrosion resistant. The wheel is first submerged in a zinc phosphate bath to ensure good paint adhesion. It is then e-coated with an acrylic primer base and the outboard side is finished with baked-on DuPont powder paint. The light e-coat on the inboard side of the wheel reduces friction between the wheel and your hub and eliminates the flaking that can occur with a heavily applied paint finish.

Improved Torque Retention Technology

The automotive-rated center disc is raised and the stud holes are beveled and uncoated for better clamp force retention. This technology helps the wheel stay tight against your hub without the need for constant retightening.

Provider Radials with Automotive-Grade Tread

Unlike standard trailer tire tread, which has solid, continuous ribs, the automotive-grade tread on these Provider radials has ribs with breaks. These breaks allow water to run off to the sides. The Provider tread also has sipes. Siping is a process in which thin grooves (or sipes) are cut into the rubber of the tire. The grooves channel water away from the tread so that the tire makes better contact with the road. Both of these features greatly improve traction during wet, snowy, or icy conditions.

Provider radials are constructed with double polyester cords and double steel belts for increased durability and endurance. A protective layer of nylon is wrapped around the steel belts to help prevent tread separation. Provider radials are bake tested - a process usually reserved for automotive tires - to ensure that the rubber holds up over time.

Match Mounted and Balanced Trailer Tire Assembly

In an ideal world, tire-and-wheel assemblies would be perfectly round and even throughout. Unfortunately tires and wheels have imperfections that often cause vibrations, resulting in a rough ride and wear and tear on the assemblies, as well as on the rest of your trailer's running gear. Taskmaster helps to solve this problem by match mounting and balancing their assemblies so they're ready to roll when they reach your door.

To do this, Taskmaster uses a laser-guided machine to locate the heavy and light spots of each assembly. They then align the assembly so that lightest part of the tire is near the heaviest part of the wheel. The assembly is then rotated at high speeds to pinpoint the optimal place to apply weights to further balance the tire.

Don't delay your adventures by having to take your trailer to the shop for new tires. Start rolling as soon as possible with easy-to-install, fully balanced tire-and-wheel assemblies from Taskmaster.

Radial Tires vs. Bias Tires

Radial ply tires are designed for trailers that are towed on the highway. The cords on a radial tire are positioned at a 90-degree angle to the direction of travel so that they lay across the width of the tire from wheel lip to wheel lip. This construction prevents the cords from rubbing against one another when the tire flexes, unlike the cords on a bias ply tire. As a result, radial tires have less rolling resistance and heat buildup, which leads to a longer tread life and improved steering at higher speeds.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

• If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
• If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
• If D = 3", then the bolt pattern is 5 on 5"
• If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

A16R80G8WMMHD44 Taskmaster Provider ST235/80R16 Radial Tire with Vesper by Maxion Wheels 16" White Modular Rim - 8 on 6.5 - LR G

Replaces Taskmaster A16R80GWM