Provider ST235/85R16 Radial Tire w/ 16" Vesper Silver Dual Wheel - Offset - 8 on 6-1/2 - LR G

Taskmaster Trailer Tires and Wheels - TA46FR

Radial tire has a 14-ply rating and a 4,400-lb max load at 110 psi. Acrylic enamel finish resists damage. Complimentary roadside assistance included. Assembly is match mounted and balanced providing longevity and a smooth ride.

Features:

• Tire-and-wheel assembly is designed for use on dually trailers
  • Wheel offset allows assembly to be used as either the inner or outer wheel of a dual-wheel setup
• Match mounted and balanced for longevity and a smooth ride
  • Reduces vibration and the wear and tear it can cause
• Sturdy steel wheel has 4 hand holes
• Silver acrylic enamel finish resists chipping and other damage better than powder coat finishes
  • Finish is applied after a zinc phosphate pre-treatment and covers an e-coat primer layer
  • Excellent corrosion resistance with a salt spray rating of more than 1,000 hours
• Center disc is spun-formed from fine-grained steel and welded into place for strength and durability
• Hub-piloted wheel requires the use of flange nuts (sold separately) for installation
• Radial tire is constructed with double steel belts and double polyester cords for a long life
  • Great for highway use
  • Nylon tread-firming belt overlays help prevent tread separation
  • Tread depth bars offer a quick visual indicator of tread wear
  • Tread is regroovable for additional mileage (federal and state laws may apply)
  • Bake tested to ensure that the rubber holds over time
• Special trailer tire design couples the strength of a bias tire with the durability and stability of a radial tire
  • Created specifically for trailers and not intended for use on other vehicles
• 2-Year Platinum Plus warranty includes emergency tire change service and other benefits
• Assembly meets DOT specifications and exceeds FMVSS

Specs:

• Rim dimensions: 16" diameter x 6" wide
• Bolt pattern: 8 on 6-1/2"
• Flange nut size: 5/8"-18
• Wheel capacity: 3,860 lbs
• Pilot diameter: 4.77"
• Offset: ±5.35"
• Tire size: ST235/85R16
  • Section width: 9.25"
  • Outer diameter: 31.73"
• Tire capacity:
  • Load range: G
  • Ply rating: 14
  • Maximum load:
    • Single tire: 4,400 lbs at 110 psi
    • Dual tire: 3,860 lbs at 110 psi
• Tread depth: 16/32"
• Maximum speed: 81 mph (speed rating M)
• 2-Year limited warranty

Platinum Plus Warranty with Roadside Assistance

This tire-and-wheel assembly comes with a Platinum Plus warranty that includes complimentary roadside assistance for 2 years. If your trailer has a flat tire, call the help line and a technician will come change out the flat tire with your existing inflated spare tire. The service is available 24 hours a day, 7 days a week. In addition to the roadside assistance, this warranty also includes other benefits and services.

Built-In Offset for Dual Applications

This tire-and-wheel assembly is designed to be used in dual-wheel setups. The 5.35" offset allows the wheel to be positioned closer to the trailer frame when used as the inner wheel of the setup. And if you use this assembly as the outer tire and wheel, the offset ensures that it will sit closer to the outside of your trailer. This hub-piloted wheel centers on the hub, not the lugs, and it requires the use of flange nuts (sold separately) for installation.

Durable Acrylic Enamel Finish

This wheel has a durable acrylic enamel finish on the front. The finish is applied after the wheel goes through an environmentally safe zinc phosphate pre-treatment and is coated with an e-coat primer layer. Compared to powder coat finishes, this finish resists getting chipped from flying road debris or scraped from hitting a curb for a longer period of time. These acrylic enamel wheels performed for more than 1,000 hours in salt spray tests.Provider RadialsProvider radials are constructed with double polyester cords and double steel belts for increased durability and endurance. A protective layer of nylon is wrapped around the steel belts to help prevent tread separation. Provider radials are bake tested - a process usually reserved for automotive tires - to ensure that the rubber holds up over time.

Match Mounted and Balanced Trailer Tire Assembly

In an ideal world, tire-and-wheel assemblies would be perfectly round and even throughout. Unfortunately tires and wheels have imperfections that often cause vibrations, resulting in a rough ride and wear and tear on the assemblies, as well as on the rest of your trailer's running gear. Taskmaster helps to solve this problem by match mounting and balancing their assemblies so they're ready to roll when they reach your door.

To do this, Taskmaster uses a laser-guided machine to locate the heavy and light spots of each assembly. They then align the assembly so that lightest part of the tire is near the heaviest part of the wheel. The assembly is then rotated at high speeds to pinpoint the optimal place to apply weights to further balance the tire.

Don't delay your adventures by having to take your trailer to the shop for new tires. Start rolling as soon as possible with easy-to-install, fully balanced tire-and-wheel assemblies from Taskmaster.

Radial Tires vs. Bias Tires

The cords on this radial ply tire are positioned at a 90-degree angle to the direction of travel so that they lay across the width of the tire from wheel lip to wheel lip. This construction prevents the cords from rubbing against one another when the tire flexes, unlike the cords on a bias ply tire. As a result, radial tires have less rolling resistance, which leads to a longer tread life and improved steering.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

• If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
• If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
• If D = 3", then the bolt pattern is 5 on 5"
• If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

A16RG477HDM Taskmaster Provider ST235/85R16 Radial Tire with Vesper by Maxion Wheels 16" Silver Dual Rim - 5.35" Offset - 8 on 6.5 - Load Range G

Replaces Taskmaster TTWA16RG477