7" Diameter. Waterproof, LED transit tail light with 32 diodes provides stop, turn, and tail functions. Built-in reflex reflector. GloLight lens creates a solid panel of light. Surface mount with included gasket. Accepts male AMP-style plug.
Features:
Specs:
This red LED light serves as a trailer tail light with stop, turn, and tail functions. The light gives your truck or trailer a distinctive look that's completely street legal. This Optronics GloLight has a unique solid light pattern when lit, so your lights stand out from the rest. Optronics GloLights are a great way to add both style and value to your truck or trailer.
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the round seven inch glow light three function LED transit light.Now this is a nice round trailer transit light that'll serve three functions, tail light function, brake light function and your turn signal light function.This one happens to be a glow light design. This glow light lens will create a nice solid light pattern, it's a nice smooth appearance. The outer band of LEDs will function as a turn signal and brake light and that solid section, the glow light part will act as a tail light.I am going to hook this up to some power in the end of the video here just to show you how bright it is.This is a sonically sealed waterproof housing and lens unit. It is submersible. It's a polycarbonate housing and an acrylic lens and this light does use the SMT technology, which is surface mount technology.It's a durable construction of the LED circuit board. Helps better withstand shock and vibration, allows improved heat distribution and thinner construction.The LEDs of this light will make great replacements for incandescent lights because they'll last 50 times longer, they're more efficient, they'll provide brighter light with less power output and of course no bulbs to replace, no brittle filaments to break and there is a lifetime warranty on the LEDs.This is a red lens over 32 white LEDs.
It is designed to Mount on the surface of the trailer with the built-in flange. Now the hardware to install this is not included. It does include the gasket on the back. This does accept the industry standard three prong plug. We do sell that separately on our website.This light is DOT, Department of Transportation compliant.
It does meet the federal motor vehicle safety standard 108 and the Canadian motor vehicle safety standard requirements for automotive lighting.A few specs on this. The power draw at 12.8 volts for the tail light is .135 amps. For the stop and turn light circuit is .340 amps.Dimensions on this again. Diameter of this is seven inches. Total depth of it is right about one and five eighths inches and what I've done is connected some clips to the plugs.
We can turn the power on and show you what it lights up like.We'll go ahead and turn our 12 volt power on. You can see there's your glow light, the middle section. I'll go ahead and turn off the overhead lights and probably on the video that you're looking at, this ring actually probably looks yellow, but actually in real life it is a red ring, so it's a solid, that would be your tail light function. Then when you hit your brakes, there would be your brake lights. Then when you do your turn signal, that would be your turn signal also.Go ahead and turn back on our overhead lights and we'll turn off our 12 volt power, but that should do it for the review on the round seven inch glow light three function LED transit light..
Average Customer Rating: 4.8 out of 5 stars (1325 Customer Reviews)
7" Diameter. Waterproof, LED transit tail light with 32 diodes provides stop, turn, and tail functions. Built-in reflex reflector. GloLight lens creates a solid panel of light. Surface mount with included gasket. Accepts male AMP-style plug.The order experience was great . You kept me informed where my order was and that it was in time.
Great experience.
Really happy with this purchase. Makes the trailer highly visable in bad weather and at night.
etrailer does provide a wide range of products with different price points so the customer has a lot of choices to make the decision that is right for her\him. You also offer good online support documentation and your technical staff is also very helpful in helping the customer make the right choices.
Unfortunately, you left me with a very bad experience. I ordered a full set of lighting & wiring to redo our quad trailer from the 7-pin plug to reverse lights. A large order. I erroneously ordered 2 reverse\turn single lights, which is on me, so I expected a restocking fee (a little excessive, but that's the inventory business). I had to return the 2 wrong lights and order the correct one. I returned both lights, but etrailer said they only received one, which I was 99% sure I returned both. You had no interest or showed any flexibility considering maybe I was correct. This is a one year review you have asked me to submit and the light you claimed I did not return, still has not shown up in my garage. I liked dealing with you on numerous occasions, but I have taken my business elsewhere. That was a sad experience.
Amazing upgrade from the old metal lights even with led replacement bulb in the metal cans. One video is the halo tail lights installed, the other is chasing a ground issue with the old lights for comparison.
These lights are totally amazing, very bright and small footprint, just need a 3/4 drill bit and they fit like a glove, will buy more for other boat trailer upgrades.
I have had these installed for a year now on my 14ft utility trailer. I love these lights! They are strong, durable, bright, and look so super cool at night! Most recently, last month, I trailered 1500 miles and through the mountains in West Virginia. They held up through curves and bumps and rainstorms and even dime-sized hail! I would recommend these to anyone who needs this style of light! I wish I had brackets enough to put two on each side... just so it would look extra bada**!
The Igor worked great. I had a heck of a time trying to order lights for the trailer - either not getting the ones I intended getting or mismatched lights. But you came through like me a champ. Thanks.
a little loose in the side marker bracket, but easily solved with a wiretie.
Added Glolight LED's to my trailer. Much brighter than the factory originals. Makes launching pre sunrise much easier. You can see where you are backing up.
Perfect for replacing the older lights on the trailer
Excellent replacement. Looks like original ones and simple to install. Tried to replace bulbs in old one's they would not hold contact and bulbs were almost as much as the replacement I saved time and anguish by just replacing the old ones
Very durable! After a year of use they as. Right as the day I installed them. Speaking of which, there was no surprises with this either.
Was not happy with the packaging. GloLights were not packaged, just placed loose in the box with other items. One piece of brown paper in the box for a void filler. Lights were scratched up when arrived.
Excellent hi vis lighting for my traile r.
Upgrading our 1998 Coleman Grandview, the old incandescent just seemed too dim.
Nice light, only suggestion would be to list some wiring options, was a bit confusing going from the old Bargman to the new LED.
But I read through the Bargman page here and got squared away.
Pic is LED before anchoring compared to the stock on the right. BIG improvement.
Fast shipping and great product! Exact replacement off a 2017 Skeeter fx21 bass boat
got these because they came up as replacement for the number of the old light that came out, these are ok but not really bright and I would have gone with a brighter unit even if I had to cut the metal out a bit to make it fit
Great light and bright....
This one is for the “driver” side. It has the lens on the bottom for lighting the license plate. (It does not include the license plate holder. I like this one because you just push in the wires. I recommend this light.
Small led, nice light
These are great light. They look so good i put them in my restomod. I didnt like the factory light i replaced all lights with LEDs. These were a perfect fit!
Even though it was a small order, the replacement light worked perfectly!!! Great price and good quality product! Thanks
These are some pretty sweet lights. Very bright and attention getting. I am constantly getting compliments on them.
The High Points-
- I bought the standard 3 prong style, works just fine with a Truck-Lite plug and with a no name one I had lying around.
- When not using driving lights both the outer and inner lights flash for turn signal. Don't remember reading about that, but it's pretty sweet(at least for the people behind me!).
- All 4 arrived in excellent shape and with all lights working.
Now, for the only negative that I can come up with-
- 2 of the lights have what I think is a sliver of white plastic stuck between the outer circle and the cover. I'm guessing it's from pressing the halves together. They can't be seen until you're very close to them, but for a $28 light it's a bit disappointing for that to get past QA.
Regardless, I highly recommend these, they are very distinctive and so far I haven't seen anyone else with them. Can't wait to be able to afford 4 more!
These lights were added to my cargo trailer that I pull behind my motorcycle. These help to make sure that people see me when I am on the road. The lights were easy to install with the grommets and pigtails that I ordered at the same time. All the products worked together well and made the project easy to do. Love these lights and will buy more if needed.
After a year of using these in the saltwater as backup lights for my boat trailer they are still going strong
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.