Summer Starts Here - Save up to 70%
4" Round. All-in-one waterproof trailer light serves 4 functions: brake, tail, turn, and backup light. Hardwired and ready to install. Red lens set inside clear lens. Flush mount with built-in flange for a finished look. 14 Diodes.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we take a look at the Optronics round fusion LED hardwired stop, tail, turn, and backup trailer light with the red and the clear lens. Now, this round trailer tail light has a nice smooth, bright red exterior which will serve four functions, and I have this hooked up to some 12 volt power so I can show you those functions. Basically, I'll go ahead and turn on a 12 volt power and you can see there's your tail lights. We'll go ahead and turn off the overhead lights and now you can see the tail lights operating. When you do apply your brakes, you'll be able to see that it gets brighter when your brakes are applied.
And then when you apply your turn signals, you'll see basically that same section. They'll flash for your turn. And then the last function I wanted to show you would be the backup function. So let me get the backup function hooked up here. And with that hooked up, and then when you go into reverse, you'll be able to see the middle white LEDs light up very bright.
Lets everybody know that you're going into reverse. It is a total of 14 LEDs. Gonna turn off our power. Now, this is a nice sonically sealed waterproof housing and lens unit, which is submersible. It uses durable SMT technology, which is surface mount technology.
That's the construction of the LED circuit board. It'll let you better withstand shock and vibration and allows for improved heat distribution. Now, we mentioned these light uses LEDs, which will make great replacements for the incandescent lights mainly 'cause they'll last 50 times longer and they're more efficient 'cause they'll provide brighter light with less power output. And the nice thing is no bulbs replaced, no brittle filaments to break, and there is a lifetime warranty on the LEDs. The red lens you can see is set inside with the white lens in the middle, and it uses red LEDs and the middle lens is white LEDs for the backup light in the middle there.
It is a flush mount design, has the built-in black flange that goes all the way around. Now to install this, you can see the three holes here that you put screws in. The hardware to install this is not included. You would have to supply that. It is hardwired. You can see at the back ready to install. The wired length is about eight inches. And the wire configuration is the black wire is your power wire or your taillights. White is your ground. Red would be your stop and turn signal. And then the brown is your backup or reverse lights. This light is DOT, Department of Transportation compliant. Does meet the federal Motor Vehicle Safety Standard 108 requirements for automotive lighting. A few dimensions on this. This is 12 volt light, hooks to 12 volt. The overall diameter of this including the flange 5-1/2 inches. The depth on it front to back's right at one inch. And the light face, just the light itself without the flange included, is 4-1/4 inches. That's gonna do it for the review on this Optronics round fusion LED hardwired stop, tail, turn, and backup trailer light with the red and the clear lens.
Average Customer Rating: 4.7 out of 5 stars (232 Customer Reviews)
4" Round. All-in-one waterproof trailer light serves 4 functions: brake, tail, turn, and backup light. Hardwired and ready to install. Red lens set inside clear lens. Flush mount with built-in flange for a finished look. 14 Diodes.Works perfectly. I had ordered a set a year ago or longer and one of them developed a short , so after hours of trying to figure out what the problem was, it was one of the lights I am replacing with this order.
I bought this set to install on the back of my enclosed overland trailer.
On occasion, i carry a basket in the trailer hitch location and my stock lights get covered. The Fusion LED lights were easy to install, very durable and are super bright. At night you can see them from a great distance!
It was an easy install since my trailer wiring harness already had the wire there for the backup lights (on my trailer you only get the backup lights if you buy the more expensive $$$$ upgrade package from the factory). For basic safety reasons I think travel trailers should have a backup light anyway. Lights are surprisingly bright and I would do this again since it was relatively easy. Also,those WAGO wire connectors with some electric tape made this job go very smooth and know that my connections are secure.
Good replacement for an existing light on our travel trailer. Trailer was wired for backup lights but none installed. This unit will give me tail, turn, brake and backup lights.
Measurements for mounting holes was exact. Did not have to drill other holes. This is a surface mount. I did have to modify the reflective trim ring that was on my original light for it to fit the new light. The housing on this light was slightly larger but the overall dimensions were the same.
Some grinding on the trim with the drimmel tool solved the problem.
Would be good for initial installation also. Initial installation would require a hole near the center of mount location to allow wiring to pass through trailer. Seems to be a quality product.
Attached photos of lights installed.
over the years Ive ordered a pile of parts, lights etc. and they have always shown up on time or actually a little earlier then told. keep up the killer work
Great product! Easy to install and the built in reverse light makes backing up my car trailer MUCH easier at night! Color coded & labeled wires make connection a breeze.
The lights are great, they are well made and are holding up very well. The LED's are bright, so far so good. My only issue with the lights was not being informed in advance that they wouldn't work without a wiring adapter and cutting up of my wiring harness. I probably would have bought the lights anyway but more informed purchasers are happy purchasers and finding the lights you just purchased wont work without an adapter, well not good.The problem wasn't with the lights it was with Etrailer.
Hello Carol, I ordered September 17th, I was supposed to receive September 22nd.
I received everything on September 29. If you look at the path of the package before the package arrives at my house. All the places that we can visualize where our package has gone.
One of the rear lights has been changed, everything is correct.
I hope this can help you with future submissions.
Have a nice day.
Excellent service and expedited delivery! I ordered the wrong tail light not once but TWICE and the customer service was outstanding. They sent me a return shipping label via email and also emailed me during the whole process for returning the items that were wrong to answer any questions and make things as easy as possible. Very impressed. Also, can’t forget to mention I paid for standard shipping and received the items within 48 hours each time!
Great customer service. Had a delay in product availability, but they communicated it and kept me up to speed the whole time. Will continue to order from them!
Great addition to the rear of my Hummer H1
The order came in quicker than expected, packaged well and we are very pleased
you were the only place that had the light I needed. ordering was easy, shipping and delivery were fast
Absolute garbage I had a custom built trailer with custom wiring and a lot of time and effort was put in to make sure that these lights did not fail I used aluminum rivets with nylon spacers fully soldered connectors with adhesive heat shrink and the lights still failed. Unfortunately I have not reached out to to see if they have warranty. But, unfortunately the money spent already to build a separate housing for these lights will cost me in the long run due to the fact I can now only run the similar light. Very unfortunate they have not tested these lights thoroughly enough.. do not recommend. Especially for salt water.
Easily replaced my lights on the cargo trailer and they look great.
Works great so far no issues nice and bright not had a bulb blow out yet!
Web site is so easy to use. Parts are available and ship quickly. Kept in formed through the shipping process. Items arrived when scheduled. Have very please with the performance of the LED tail light.. 5 stars for this company and customer service...
I just got a new boat and had damaged the trailer light no other place around had a matched light even the large outdoor shop (starts with a C) sold me the incorrect ones for $60. Then as frustration started impacting me. I saw etrailers online, saw a light that was identical, took a chance and it was the exact light for only 1/3 of the price I paid at the large outdoor store. End result, I'm very pleased with my purchase, shipping and overall.
Please see attached photos of my lights installed on a trailer.
These lights are a direct replacement for the stock optronics stop/turn/tail lights on my Sundowner horse trailer. It was pre wired from the factory for backup lights but none were installed. If you pull off the rear right side light cover of the trailer there is a yellow wire that is capped off. Double Check with a light tester that it is the power wire for reverse lights. I drilled out the old rivets and installed the new lights with the reverse light wired up to the yellow power wire
The leds are nice and bright for all functions
Great product & wonderful service.
These lights are great on my PU camper , a little over priced - probably as they are waterproof. Very bright back up and break/ turn lights . Running is more subdued, so as not to be mistaken for breaking
Used on our off-road teardrop trailer. Install was easy. Quality appears robust. Holding up well after a year, though half that time was sitting as we had a long winter here this year.
Purchasing with etrailer.com was easy, quick and the product arrived when estimated. Excellent service. This light bar was exactly what we were looking for.
I purchased these to spruce up an old fold-out tent trailer that I bounce around out in the hills. They were easy to install and draw almost no current compared to the old incandescent lamps.
I wired it so when I'm camped, I can run the reverse lights on the trailer battery to light up the camp site instead of having to carry around a flash light.
Great value, and they work well also. You can't go wrong with etrailer lights.
Need to return. Turns out my trailer only has 2 wires, tail stop and signal. backup will require additional wiring.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.