Stainless Steel Trim Ring For Flange Mount Trailer Lights - 4" Round

Video Transcript for Review of Peterson Trailer Light Accessories - Stainless Steel Trim Ring - PE27WR

Ellen: Hey everyone. I'm Ellen here at etrailer.com and we're going to be taking a look at the stainless steel trim ring for your Peterson lights.This is just an nice chrome or steel ring to go around your light, do a little added flair, a little added reflectiveness as well. It kind of dresses up your light a little bit.It fits a four inch diameter light with a flange mount, so something that should look like this guy here. This is also available at eachtrailer.com. There's going to be a couple of different versions of this. This happens to be the red one.

You can just line up the holes in the light, singe it down with your hardware.The light and the trim ring, neither one of them come with any hardware so you will have to provide that on your own, but as you can see, it just kind of makes it look a little nicer, adds a little flare to your light overall.Again, it is going to be a stainless steel construction, so it should resist any kind of rust and corrosion, should stay looking nice for a long time. Just screws right in place. It is fairly thin piece. As far as the overall size, give you the outside measurements here. From outer edge to outer edge, it's about five and five eights of an inch, just shy of five and three quarter, trying to make sure.

That inner diameter is about right at four inches.It's covered by a limited lifetime warranty. That's really about all there is to it for our look at the stainless steel trim ring. I hope this has been helpful in deciding if this is the right piece for you.Again, check us out here at etrailer.com. We've got a lot of lighting options for your trailer to get you lit up on the road. Thanks for watching..