Fusion LED Hardwired Trailer Light - Stop, Tail, Turn, Backup - Oval - Red/Clear Lens - 12 Diodes
(232 reviews)
Price: $14.72
In Stock
Fusion LED Hardwired Trailer Light - Stop, Tail, Turn, Backup - Oval - Red/Clear Lens - 12 Diodes
Item # OPT24NR
Retail:$18.66
Our Price: $14.72
You Save: 21%
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (232)
- Q & A (0)
- Videos (1)
- Photos
Optronics Trailer Lights - OPT24NR
- Tail Lights
- Oval
- LED Light
- Red and White
- 6-7/16L x 2-1/4W Inch
- Recessed Mount
- Stop/Turn/Tail/Backup
- Submersible Lights
- Optronics
6" Oval. All-in-one waterproof trailer light serves 4 functions: brake, tail, turn, and backup light. Hardwired and ready to install. Red lens set inside clear lens. Recessed grommet mount (rubber grommet sold separately). 14 Diodes.
Features:
- Oval trailer tail light with smooth, bright red outer band serves 4 functions
- Stop light - outer band of 10 red LEDs brightens and flashes
- Tail light - outer band of 10 red LEDs brightens and flashes
- Turn signal light - outer band of 10 red LEDs light up
- Backup light - center 10 white LEDs light up
- Sonically sealed, waterproof housing and lens unit is submersible
- Durable surface-mount technology (SMT) construction of LED circuit board
- Better withstands shock and vibration
- Allows for improved heat distribution
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate lens and housing
- Red lens set inside white lens with red and white LEDs
- Red lens with red LEDs for tail light
- Clear lens with white LEDs for backup light
- Recessed grommet mount (hardware not included, grommet sold separately)
- Hardwired and ready to install
- DOT compliant
- Meets FMVSS 108 requirements for automotive lighting
Specs:
- Wire configuration:
- Black wire: tail
- Red wire: stop/turn
- Brown wire: backup
- White wire: ground
- Overall dimensions: 6-7/16" long x 2-1/4" tall x 15/16" deep
- Wire length: 8-1/16"
- Diodes: 12
- Voltage: 12V
- Lifetime warranty on LEDs
STL306MGHB Optronics Fusion Hardwired 6" Oval Combination LED Trailer Taillight - Red/Clear Lens - Weathertight Plug - Black Grommet
Video of Fusion LED Hardwired Trailer Light - Stop, Tail, Turn, Backup - Oval - Red/Clear Lens - 12 Diodes
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Optronics Trailer Lights - Tail Lights - OPT24NR
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at the Optronics Oval Fusion LED Hardwired Stop/Tail/Turn and Backup Trailer Light with the red and the clear lens. Now, this is an oval trailer taillight. Has a nice, smooth, bright red exterior, which will serve four functions. Now, we do have this hooked up to some 12-volt power just to show you those functions. So what we're gonna do is first turn on our power, and you'll hit your taillight function.
Go ahead and turn off our overhead lights, so you can see. That's the taillight function. When you do hit your brakes, you can see how those lights there's eight of them there. There're eight red LEDs. They do light up when you hit your brakes.
And then when you hit your turn signal, it's the same way. They will light up brighter and also flash. And the last function I wanna show you is the backup light function. Now, the backup light function, let me get it hooked up here. Once we get that hooked up, now we'll be able to go.
When we go into reverse, you'll be able to see that the four white LEDs will come on in the middle white lens area. So when you're going to back up, it'll come on, and everybody will be able to see that you're going in reverse. Very bright LEDs. Go ahead and turn back on overhead lights. Turn off our power.
Now, this slide is in a sonically-sealed waterproof housing and lens unit. It is submersible. It uses durable SMT technology, which is surface-mount technology. That's the construction of the LED circuit board that'll allow you to. or have better withstand the shock and vibration, and allows for improved heat distribution. We mentioned there are LEDs in here. The LEDs will make great replacements for the incandescent lights. Because they'll last about 50 times longer, they're also more efficient 'cause they'll provide brighter light, less power output. And the nice thing is no bulbs to replace or brittle filaments that are gonna break. And you do get a lifetime warranty on the LEDs. We mentioned it's the red lens with the nice white lens in the middle here with red and white LEDs. Basically, the red lens has red LEDs for the taillight. The middle clear lens has white LEDs for the backup light. Now, this is a recessed grommet design. It is designed to install into a rubber grommet. Now, that rubber grommet is not included. We do sell that separately on our website. It's part number A70 GB. Now, this slide is hardwired and ready to install. The wire length, as you can see, is eight inches and the configurations of the wire, the black wire is your taillight, white is your ground, red is your stop and turn, and the brown is your backup light. This is DOT, Department of Transportation-compliant. It does meet the Federal Motor Vehicle Safety Standard 108 Requirements for Automotive Lighting. We mentioned it is a 12-volt light. Last thing is just the dimension on the light itself. So the overall length from one end to the other, 6 3/8 inches long. Width on it, 2 1/4 inches wide. And the total depth of the light, right at one inch deep. But that should do it for the review on the Optronics Oval Fusion LED Hardwired Stop/Tail/Turn and Backup Trailer Light with the red and the clear lens.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Fusion LED Hardwired Trailer Light - Stop, Tail, Turn, Backup - Oval - Red/Clear Lens - 12 Diodes - OPT24NR
Average Customer Rating: 4.7 out of 5 stars (232 Customer Reviews)
6" Oval. All-in-one waterproof trailer light serves 4 functions: brake, tail, turn, and backup light. Hardwired and ready to install. Red lens set inside clear lens. Recessed grommet mount (rubber grommet sold separately). 14 Diodes.by: Brenda 04/27/2024
Works perfectly. I had ordered a set a year ago or longer and one of them developed a short , so after hours of trying to figure out what the problem was, it was one of the lights I am replacing with this order.
by: jeremy01/05/2022
I bought this set to install on the back of my enclosed overland trailer.
On occasion, i carry a basket in the trailer hitch location and my stock lights get covered. The Fusion LED lights were easy to install, very durable and are super bright. At night you can see them from a great distance!
by: Christopher10/16/2023
It was an easy install since my trailer wiring harness already had the wire there for the backup lights (on my trailer you only get the backup lights if you buy the more expensive $$$$ upgrade package from the factory). For basic safety reasons I think travel trailers should have a backup light anyway. Lights are surprisingly bright and I would do this again since it was relatively easy. Also,those WAGO wire connectors with some electric tape made this job go very smooth and know that my connections are secure.
by: Dar B.06/13/2017
Good replacement for an existing light on our travel trailer. Trailer was wired for backup lights but none installed. This unit will give me tail, turn, brake and backup lights.
Measurements for mounting holes was exact. Did not have to drill other holes. This is a surface mount. I did have to modify the reflective trim ring that was on my original light for it to fit the new light. The housing on this light was slightly larger but the overall dimensions were the same.
Some grinding on the trim with the drimmel tool solved the problem.
Would be good for initial installation also. Initial installation would require a hole near the center of mount location to allow wiring to pass through trailer. Seems to be a quality product.
Attached photos of lights installed.
by: Cody 03/29/2024
over the years Ive ordered a pile of parts, lights etc. and they have always shown up on time or actually a little earlier then told. keep up the killer work
by: John 09/29/2023
Great product! Easy to install and the built in reverse light makes backing up my car trailer MUCH easier at night! Color coded & labeled wires make connection a breeze.
by: Michael04/26/2022
The lights are great, they are well made and are holding up very well. The LED's are bright, so far so good. My only issue with the lights was not being informed in advance that they wouldn't work without a wiring adapter and cutting up of my wiring harness. I probably would have bought the lights anyway but more informed purchasers are happy purchasers and finding the lights you just purchased wont work without an adapter, well not good.The problem wasn't with the lights it was with Etrailer.
by: Carmen 10/02/2023
Hello Carol, I ordered September 17th, I was supposed to receive September 22nd.
I received everything on September 29. If you look at the path of the package before the package arrives at my house. All the places that we can visualize where our package has gone.
One of the rear lights has been changed, everything is correct.
I hope this can help you with future submissions.
Have a nice day.
by: Taylor05/02/2024
Excellent service and expedited delivery! I ordered the wrong tail light not once but TWICE and the customer service was outstanding. They sent me a return shipping label via email and also emailed me during the whole process for returning the items that were wrong to answer any questions and make things as easy as possible. Very impressed. Also, can’t forget to mention I paid for standard shipping and received the items within 48 hours each time!
by: Michael 04/20/2024
Great customer service. Had a delay in product availability, but they communicated it and kept me up to speed the whole time. Will continue to order from them!
by: Rafael07/06/2023
Great addition to the rear of my Hummer H1
by: Gail 05/10/2024
The order came in quicker than expected, packaged well and we are very pleased
by: Bob 05/16/2024
you were the only place that had the light I needed. ordering was easy, shipping and delivery were fast
by: Luke03/16/2023
Absolute garbage I had a custom built trailer with custom wiring and a lot of time and effort was put in to make sure that these lights did not fail I used aluminum rivets with nylon spacers fully soldered connectors with adhesive heat shrink and the lights still failed. Unfortunately I have not reached out to to see if they have warranty. But, unfortunately the money spent already to build a separate housing for these lights will cost me in the long run due to the fact I can now only run the similar light. Very unfortunate they have not tested these lights thoroughly enough.. do not recommend. Especially for salt water.
by: Guy09/13/2023
Easily replaced my lights on the cargo trailer and they look great.
by: James 11/02/2023
Works great so far no issues nice and bright not had a bulb blow out yet!
by: Monty08/19/2023
Web site is so easy to use. Parts are available and ship quickly. Kept in formed through the shipping process. Items arrived when scheduled. Have very please with the performance of the LED tail light.. 5 stars for this company and customer service...
by: Brien06/16/2019
I just got a new boat and had damaged the trailer light no other place around had a matched light even the large outdoor shop (starts with a C) sold me the incorrect ones for $60. Then as frustration started impacting me. I saw etrailers online, saw a light that was identical, took a chance and it was the exact light for only 1/3 of the price I paid at the large outdoor store. End result, I'm very pleased with my purchase, shipping and overall.
by: Jacob03/18/2018
Please see attached photos of my lights installed on a trailer.
These lights are a direct replacement for the stock optronics stop/turn/tail lights on my Sundowner horse trailer. It was pre wired from the factory for backup lights but none were installed. If you pull off the rear right side light cover of the trailer there is a yellow wire that is capped off. Double Check with a light tester that it is the power wire for reverse lights. I drilled out the old rivets and installed the new lights with the reverse light wired up to the yellow power wire
The leds are nice and bright for all functions
by: Lucy 03/11/2024
Great product & wonderful service.
by: Brian02/07/2022
These lights are great on my PU camper , a little over priced - probably as they are waterproof. Very bright back up and break/ turn lights . Running is more subdued, so as not to be mistaken for breaking
by: CK07/22/2023
Used on our off-road teardrop trailer. Install was easy. Quality appears robust. Holding up well after a year, though half that time was sitting as we had a long winter here this year.
by: Tamara 08/16/2023
Purchasing with etrailer.com was easy, quick and the product arrived when estimated. Excellent service. This light bar was exactly what we were looking for.
by: Pete P12/27/2019
I purchased these to spruce up an old fold-out tent trailer that I bounce around out in the hills. They were easy to install and draw almost no current compared to the old incandescent lamps.
I wired it so when I'm camped, I can run the reverse lights on the trailer battery to light up the camp site instead of having to carry around a flash light.
Great value, and they work well also. You can't go wrong with etrailer lights.
by: Claudiette08/07/2023
Need to return. Turns out my trailer only has 2 wires, tail stop and signal. backup will require additional wiring.
25
232
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Updated by:
Wilson B
Written by:
Justice A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.