Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
A black molded ABS fender bracket for use with the MC65ARB and MCL65ARB trailer marker/clearance lights. This molded plastic bracket is to be installed on top of the trailer fender. A single-wire plug is included which contains a lead wire for power and grounds the light through the mounting hardware of the bracket.
Molded ABS bracket and self grounding, one wire plug. For use in exterior (top) fender applications with parts MC65ARB or MCL65ARB.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (135 Customer Reviews)
Fit right on my older horse trailer
These are serving their purpose as intended. Normally, the ground connection is provided by one of the mounting screws. I modified them to add a dedicated ground wire to each one. I installed these on my car trailer with removable fenders. Since the fenders are not directly bolted to the trailer, I did not want to rely on the probably intermittent ground connection. So I ran the wires to the end of the fender and used Hopkins 2-Pole Flat Wiring Extensions (Item # HM47965) to provide a quick disconnect for the wiring. Working great!
Perfect replacement for my factory brac ket.
Really like these lights but by choice I have them where they take a beating sometimes. Even though I have to replace them on occasions it’s worth it to me. Actually they are really rugged, I’m extremely happy with them. Etrailer is my go to place for any trailer part!
Thank you for you business!
I guess it is fine. I purchaesed this item to replace a broken one, then sold the trailer. So I have not seen it perform. But, the buyer never brought the trailer back or contacted me to say it was not working.
Great replacement for the one damaged on my trailer by the woman on her cellphone pulling out of an Aldi’s grocery store parking lot. It looks perfect!
After searching found what I needed at e-trailer. Fast shipping and great customer service. Will definitely shop here again.
Easy to install.. direct replacement..i received them on time..i highly recommended this product and ETRAILER!
I haven't installed them just yet. But so far I'm pleased with the products.
The brackets or a bit smaller than the OEM parts so I'm trying to figure out how to hide the fender holes from the old brackets. The lights look to provide a bit more visible than those I am replacing. I will edit this review once I install them, light up the trailer and see how they look and perform. Thank you etrailer.com.
This was just what was needed to repair the fender clearance lights on my trailer, the same as the factory one that quit working
Sfa
3/22/2018
Great product, fit just as the original lights on the fender clearance lights.
Received everything I asked for pack nicely in a box
A decent light base in a perfect world but very vulnerable to damage. Wish I would have made my own brackets and used 2 small LED lights.
Jim
5/2/2017
My experience has not been good with these fender light bases. Ordered 2 replacements as I broke one and the other became intermittent in operation. Really believe an armored sealed dual lens led light would be more satisfactory for fender applications to withstand the environment and abuse they receive on a utility trailer.
I liked that the wire is longer and I was able to make the connection inside the trailer
I received the product in time and well packed as usual. The product was as described. Customer service prior to my purchase was excellent. I highly recommend etrailer.
Manny E.
2/23/2018
Im still happy with my purchase
Great replacement parts for my trailer that was damamged in the Camp Fire in 2018. The trailer did pretty well but the marker lights, tail lights and fender lights all melted. These parts were perfect replacements and mounted without a problem.
If you are getting rid of tired old incandescent fender bulbs, you’ll want the fender mount to go with the new LED lights as well. Needed anyways, the mounts were corroded with 10 years of gunk anyway. Reuse the existing mount screws from the old housing, use a new bead of RTV and you are headed down the highway.
Just installed the new fender brackets and lights, very easy to install and wire up. thanks for a great product, it all fit my look trailer fenders just like the original parts. thanks again, RCH III
This was a replacement for the original lights. I did have to cut the end as it was a little longer than what was on my trailer.
The trailer tire fender arrived on time and was exactly what I wanted. I would buy from etrailer again.
I had to replace a couple things on my enclosed Haulmark trailer when I updated to LED lights, etrailer had everything
This light was an exact replacement for the old existing light that is mounted on the fender of the trailer and it was an extremely easy replacement.
The fender clearance light fit perfect on our trailer. Excellent product and really enjoyed the fast delivery! Thank you :)
Wow! Thought I would never be able to find an exact replacement for this when it came off the trailer. Well, the entire fender coming off the trailer, but that is another story! This worked perfectly and matches the other side! Perfect!
fit and worked as advertised good quali ty
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Rex H.
2/20/2018
Happy. Very pleased with the results.