Summer Starts Here - Save up to 70%
3/4" Diameter x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Recessed mount with included grommet. 2-Wire pigtail with.156 bullets. PC rated.
Features:
Specs:
This red LED light serves as either a side marker light or a clearance light. The light gives your truck or trailer a distinctive look that's completely street legal. This Optronics GloLight has a unique solid light pattern when lit, so your lights stand out from the rest. Optronics GloLights are a great way to add both style and value to your truck or trailer.
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
Recessed-mount trailer lights install underneath a housing or a grommet (A11GB). These lights will extend into the mounting surface and require that a hole be cut into your trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the GloLite Uni-lite Mini LED clearance or side marker light. This is a three quarter inch diameter by seven-eighths inch round trailer light that can function as both a clearance light or a side marker light, depending on how you have it installed. It can work as both simultaneously if you have it installed properly, and that is because it is PC-rated, which means you'll be able to see it head-on like so, or from a 90 degree angle to give you a total 180 degrees of visibility.This is a sealed waterproof construction, so it is submersible. So, if you want to put it on your boat trailers, they'll do just fine there.
This is a red acrylic lens over top two white LEDs. It also has a durable polycarbonate housing, so it is going to last you a nice long time. With LEDs, if you're not familiar, they are a great option. They do last longer than your older style incandescent lights because they don't have the brittle filament inside that tends to break on the incandescence, so they are going to last about 50 times longer than your incandescent lights do. This one does have a lifetime warranty on the LEDs, so they are going to last you a nice long time.
Plus, they're more efficient, so you're going to get a brighter light with less power draw. So, LED is a great way to go.This does feature an LED circuit board that is constructed using the surface mount technology, so it's going to be very durable. It's going to help better withstand shock, moisture, and vibration, so it's going to hold up really well on your trailers, especially if you're taking them off road, something like that, they'll hold up well, do a good job for you. It also helps with the heat distribution, as well as making it a thinner construction. So, it's very durable, should do a good job for you.You can see, we do have this grommet here.
This is going to allow us to have this recessed mounted, so that you just have to drill a three-quarter inch hole and then slide this in. And then, it will sit there on our trailer like so. So, it'll just stick out a little bit. This does have a two wire pigtail to it, so you've got your white ground and your black power supply. Does have the 0.156 female bullet connectors to get this plugged in, so it'll plug right in to your two male bullet connectors to get right going to your trailer.This is Department of Transportation compliant, so it's going to meet all those standards, allow you to pull your trailer safely and legally.
And I think, overall, this is going to be a great option for you. It's going to provide a bright light, make sure that all of your side marker lights or tail lights are visible as you're pulling that trailer. So, that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Average Customer Rating: 4.7 out of 5 stars (63 Customer Reviews)
3/4" Diameter x 7/8". Waterproof, LED trailer light serves as a side marker light or a clearance light. GloLight lens creates a solid panel of light. Recessed mount with included grommet. 2-Wire pigtail with.156 bullets. PC rated.worked great
Lovers it very easy to find and order p arts
I installed GloLight Mini LED clearance lights on a flatbed I fabricated for an older GMC K3500, truck. The lights continue to function as they should. I am happy with my purchase.
This is a fantastic little light. I've bought off brands before and the wire is so thin you know it's not going to last very long. The wires on this light are normal gauge (about 16g) and very easy to solder and connect. Very confident it will hold up to abuse of off roading.
And it is bright! I use these for marker lights and turn signals. No issues seeing them during the day.
Nice and bright! Looks as good today as it did a year ago when installed.
What I like about these are that the wires are nice and heavy gauge. It feels very well made and I'm confident it will withstand the abuse of my Baja. I use these as marker lights and turn signals. They are really bright and no issues seeing them during the day.
Great mini marker lights and sealed perfect so they don't corrode out in six months
Great product, fast delivery !!
Perfect fit on new Jeep fenders. This was the only site that had this size light with both Marker and Turn lights.
Nicely replaced my burnt out marker lig ht.
Bought this to replace the front corner markers/running lights in my GM truck. Since the OEM setup combines the marker and signal function into one filament, I couldn’t just plug in an LED “bulb”. I trimmed the housing to fit the rubber grommet for this uni-lite and with some wiggling got it to fit nicely. Rewired the truck to provide separate running light and signal wires and everything has been working great.
etrailer always delivers good and quickly.
Mark. Indy
I like small marker lights. Easily seen without being overwhelmingly bright which can cause glare. I've had great experience with the quality of Optronics; with less expensive brands not so much.
Don't let the small size fool you, these little lights are pretty bright. You need to be spot on with the diameter of hole you drill that these lights recess into.
Excellent to have a marker light in a 3 wire to put a blinker on the fender of the trailer too.
Etrailer is one of the best company we have ever ordered from. We always receive exactly what we order and arrives quickly. This is our “go to” company for all our trailer needs
Not very good turn signal it has very little blinking so not warning people next to trailer.
Etrailer makes it easy to find hard to find items, their follow up communications and prices are great.
Etrailer makes it easy to find hard to find items, their follow up communications and prices are great.
Half of them are cracked and a couple quit working after a month.
Works great for my UTV signal lights!
they worked great and the project turned out perfect.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.