Replacement Hub For Trail Star Boat Trailer With 5 Lugs For Threaded Wheel Bolts and L44649 Bearings
Question:
I have a bass tracker pro 185 with a trail star trailer. Need the hub for the trailer. Bearings is a l44649 inner and outer. Which hub do I need ?
asked by: Nick W
Expert Reply:
Thank you for including the image Nick as that helps me see your hub has the 5 lugs and threaded holes for wheel bolts. The Dexter Trailer Idler Hub # 008-258-04 is currently the only hub we have for your spindle size which has the threaded holes. This hub comes with the races pressed in but you will need 2 of the Bearings # L44649. a Grease Seal # 10-9 and either a EZ Lube Grease Cap # DE69YR, Standard Grease Cap # F001518 or we have the Bearing Buddy # BB1980A you can upgrade to.
We currently only carry the Wheel Bolts in a 4-Pack with 60 Degree # RG02-020 or 90 Degree # RG02-040 cones.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug - 1.98" Outer Diameter
- Trailer Bearings Races Seals Caps
- Caps
- Easy Grease Grease Cap
- E-Z Lube Grease Cap
- 1.98 Inch O.D.
- DeeMaxx
more information >
Grease Cap - 1.988" Outer Diameter - Drive In
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Trailer Wheel Bolts - 1/2" Diameter x 1" Long - 60 Degree - Qty 4
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Bolts
- 1/2 Inch Diameter
- Fine Thread
- 1 Inch Long
- Redline
more information >
Wheel Bolts, 1/2" x 7/8", 90 Degree (Qty 4)
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Bolts
- 1/2 Inch Diameter
- Fine Thread
- 7/8 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub for 2,200-lb Axles - 5 on 4-1/2" - 1/2" Tapped Holes
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2200 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Clearance of Baby Moon Hub Caps for Bearing Buddies
- Q&A: Replacement Hub, Bearing, and Grease Seal Kit for a UFP H-1062-3 Axle
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Q&A: How to Upgrade Trailer with 45 MPH Speed Rating for Highway Speeds
- Q&A: Hub Recommendation for Spindle that is 1 inch in Diameter and has 5 on 4-1/2 inch Bolt Pattern
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How to Determine GAWR of 2-1/2-Inch Square Axle By Using Bearing Numbers
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Trailer Tire Sizing
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Bleed Your Trailer Surge Brakes