bing tracking image
  1. Trailer Hitch
  2. Subaru
  3. Impreza
  4. 2013
  5. EcoHitch
FITS 2013 Subaru Impreza
EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2"

EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 306-X7211
Our Price: $402.47
Trailer Hitch
Confirmed to Fit
2013 Subaru Impreza

5-Door Wagon with Single Exhaust

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 29 lbs
Add to cart
In Stock
306-X7211 - Class III EcoHitch Trailer Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
EcoHitch trailer hitch for your 2013 Subaru Impreza are available from etrailer.com. Installation instructions and reviews for your Subaru trailer hitch. Expert service, and great trailer hitch prices. etrailer.com carries a complete line of EcoHitch products. Order your EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 306-X7211 online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (45)
  • Q & A (0)
  • Photos

2013 Subaru Impreza - EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2"

  • 2 Inch Hitch
  • Class III
  • 3500
  • Completely Hidden
  • EcoHitch
  • 525
  • Custom Fit Hitch

This completely hidden, custom-fit hitch installs behind your Subaru Impreza's factory knockout panel. Aluminum and steel alloy construction is durable and eco-friendly. Powder coat finish resists rust.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Hidden design - hitch is completely out of sight for a clean, from-the-factory look
    • Hitch cross tube is concealed behind body of vehicle
    • Receiver is hidden behind knockout panel when not in use
  • Easy, bolt-on installation - no drilling or welding required
  • Sturdy, lightweight alloy construction
    • Alloy is made of recycled materials and combines aluminum, steel, and stainless steel
  • Black powder coat finish offers superior rust protection
  • Meets SAE J684 towing safety regulations
  • Made in the USA


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 525 lbs
    • Not rated for weight distribution systems
  • Limited lifetime warranty


Completely Hidden for a Clean, Factory Look

The EcoHitch Invisi trailer hitch is designed to be completely out of sight. The hitch cross tube bolts onto your vehicle's frame, behind the body of your vehicle. No drilling or welding is required. The receiver portion of the hitch will sit just behind the factory knockout panel in your bumper. Just pop the panel off to tow and put it back on again for a from-the-factory look when you're done using the hitch.


Eco-Friendly Material

With a combination of aerospace-grade aluminum, steel, and stainless steel, each EcoHitch is made of a strong metal alloy that will stand the test of time. The lightweight alloy is composed of recycled materials. Traditional steel hitch manufacturing can use coal or oil, which can contribute to harmful gas emissions. The EcoHitch's recycled materials limit the carbon footprint during manufacturing, so you get a sturdy trailer hitch while also helping the environment.


Rigorous Strength Testing Ensures Durability

This EcoHitch trailer hitch is tested for durability and sturdiness. Using Finite Elemental Analysis (FEA), individual points of stress on the hitch can be detected and remedied. Designers can accurately test the hitch to ensure that it will meet or exceed SAE J684 standards. The EcoHitch Invisi trailer hitch is carefully researched and strength tested for a durable, high-quality hitch that can resist damage while on the road.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



X7211 Tork Lift Central Eco Hitch Invisible Trailer Hitch - 2" Receiver

Installation Details 306-X7211 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.

Tongue Weight (TW):
525 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



No drilling required Manufacturer Estimated Installation Time

Tech Tip

Hitch will only fit models with center knock-out panel in the lower rear fascia. Hitch does not fit WRX or WRX STi models. No drilling required for installation , Requires temporary removal of bumper/fascia during installation , Exhaust must be temporarily lowered for installation , Fascia trimming required





Customer Satisfaction Score:


Customer Reviews

EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2" - 306-X7211

Average Customer Rating:  4.8 out of 5 stars   (45 Customer Reviews)

This completely hidden, custom-fit hitch installs behind your vehicle's factory knockout panel. Aluminum and steel alloy construction is durable and eco-friendly. Powder coat finish resists rust.

by:

Pretty easy install. Replacing an existing 1-1/4" hitch so did not need to fish bolts. Some alignment issues with the knockout opening and rear bumper clips were easily solved using a couple spacers.



by:
2013SubaruImpreza

I bought the hitch to haul a few E-Bikes. Every installer I talked to only supplied hitches with 1.25" receiver for my car (Subaru Impreza). But, every bike rack I found to support the weight of E-Bikes required a 2" receiver. I got the recommendation from a local Hitch Shop to purchase this specific hitch from etrailer and they would install it.
It was installed yesterday, and I am very happy with the result! It installs beautifully, and discretely. Can't wait to hook the bikes up next weekend!



by:

Great service helping me order the right hitch for my car. Delivery was fast. It's on the car and works perfectly with my Hollywood bike rack. A great experience all around.

Douglas

4/15/2023

We have used this hitch often carrying our fat tire E-Bikes to various trailheads. It holds the large bike rack and both bikes securely. Were very happy with the performance of this product.



by:

Took less than 35 minutes to install and like it says......invisible! People can't believe that it's there. You do need to get an extended trailer hitch ball mount but this thing is awesome!



by:

The hitch has two installation options. 1) is removing the bumper. 2. Bore out a hole in the trunk to pull the connection bolts through. I chose the second option. It was way easier took about a half hour. The rack lines up perfect with rear fog light hole and gave me way more ground clearance. Even with the higher price for this hitch I found it was well worth it.



by:
Ford Edge

Quality parts, smooth install and solid feeling hitch.

The only negative comment I can make on fitment is that the lower edge of the receiver tubing seemed a fraction of an inch too low. I expect that I will need to push down the lower portion of the plastic surround (behind the bumper knock-out) ~1/8" in order to insert the stinger. I imagine this could be a result of manufacturing tolerances on hitch and/or car and is not a real complaint but an observation.

As advertised, it's very discreet. Unless you lay on the ground and go looking for it, you'd never know the hitch was there.



by:

Perfect fit for my 2013 Subaru Impreza. My specific search was for something that would not impact the already poor ground clearance of my Impreza. This fits perfectly into the rear bumper and is not hard to set up. Recommend using a friend's help for an extra set of hands to align and hold it up while setting it up, but it's not a major project. Drove cross country and back with my Kuat Bike rack and two bikes, zero problems. Note that it is a bit tricky to get to the key positioning on the hitch lock, but that's actually a security advantage - nearly impossible to tamper with!



by:
2015 SubaruImpreza

Perfet fit for my 2015 Subaru Impreza, hatchback. Installation was very simple, no jack and no power tools required.



by:
2016 SubaruImpreza

I have a 2016 Subaru Impreza hatchback and got this to use for transporting bikes. It's a very strong hitch and suits my needs. I had first considered using the Thule T2 Pro XT 2 but the car bumper gets in the way of the hook on the Thule bike rack. So instead I got the 1up bike rack which attaches with no problem. The hitch doesn't center perfectly in the knockout panel; when putting in the bike rack, I have to push down on the plastic around the knockout panel. That works out just fine but is a little annoying. All-in-all, I think this hitch is worth it despite these minor issues.

Shaun

12/29/2020

Still working great - sturdy and clean-looking



by:

Hitch and wiring showed up on time. Going to install in the next few days. Looking foward to having a hitch hidden behind the bumper up high and not hanging down too low to hit the ground. Will be at a preferred level to pull my seadoo with out having to use a raised coupling.

Larry A.

7/27/2018

Best hitch ever. Install was fairly easy. Perfectly hidden too. Very glad I installed this with the bumper removed, no drilling at all. Fully stock.



by:

The hitch has performed flawlessly. I use it for a 2 bike rack, no towing. The hitch is invisible when not in use. Works perfect!

Dennis B.

11/13/2020

Its amazing. I am able to put two bikes on my car without having them on the roof, the receiver is fairly hidden and if needed it comes off with one bolt. I love it!



by:

Get fit love the hitch



by:
2015 SubaruImpreza

Although it was rated difficult to install I had it installed in less than 2 hours. The directions that came with the hitch were spot on. Only thing I did different was I didn’t touch the muffler and the hitch went right in with no problems.

Gerald M.

7/3/2019

Better than expected, no problems attaching what ever hitch I want to use that day from my bicycle hitch or a small trailer hitch. Very glad I went with your product



by:
2016 SubaruImpreza

Bought this for my 2016 Impreza hatchback. I am putting a Rockymounts 2 inch two bike-bike rack on it. I love how easy the installation process was, the quality of the product is sturdy, and there are easy to understand instructions. It was hard to see from other reviews if the Rockymounts bike rack and hitch opening would fit and not smack the muffler. Rest assured, this does not touch the muffler, doesn't even come close when the rack and hitch pin are on it. My only recommendation would be to suggest in the installation instructions for people to cut out the plastic underside of their bumper since this is recessed behind the bumper and accessing the hitch pin will be difficult unless you have very flexible tiny hands.



by:
2016 SubaruImpreza

Installed this on my 2016 Subaru Impreza Sport Premium hatchback and the actual hitch went in very easy. The bolt fishing tool included in the kit was especially useful, although tightening the bolts inside the frame required the use of a short socket and my 3/8" breaker bar, which was just long enough to get in there and keep the bolt from spinning while tightening the nut with a torque wrench. I did not need to lower the exhaust which undoubtedly saved some frustration. The most difficult part of the installation was wrestling with the many push rivets that hold the bumper fascia in place. I suggest buying several new ones, or maybe even all new ones, so that stubborn rivets can just be broken off and new ones installed. These can be found online in packs of a dozen or so for about ten bucks, or in any auto parts store.

This hitch appears to be very well made and sturdy, and its rating far exceeds the towing/tongue weight capacity of the vehicle (this is ideal, as the hardware should never be the weakest link). With the knockout plate put back in, the external appearance of the car is unchanged as is the ground clearance (which is already low on the Impreza). Getting a pin into the hitch will require laying on the ground under the car but wouldn't be too hard, thankfully the 1up bike rack I plan to use with it has a locking ball bearing retention so no worries there. Plus it could be an added deterrent to anyone looking to detach your hitch and steal your trailer or rack or whatever.

Etrailer shipping was very fast and the instructions were easy to follow, all in all an excellent purchase from start to finish!



by:
2015 SubaruImpreza

Hitch fit perfectly on my 2015 impreza sport. Heavy duty and completely hidden when not in use.



by:

Great hitch that has done what I needed it to do. ...except carry 1100 or so lbs in my trailer to MS for vacation. Darned COVID-19.

My only complaint is that it's *really* hard to get the chains hooked up, and requires climbing under the car. If it weren't for that, I'd have given it 5 stars.



by:
2016 SubaruImpreza

Shipping was great. The team told me it was back ordered and notified me when it actually shipped. Installation on a 2016 Impreza was smooth and took me about 2.5 hours. I had to fight some of the bumper fascia clips due to ice/dirt on them because I installed in the middle of winter, and I needed a long extension to get at some of the bumper bolts. The actual hitch install was great and I didn’t have to drop the exhaust. It lines up perfectly with the bumper knockout, and will be “invisible” until I’m ready to use it.



by:
2015 SubaruImpreza

I was surprised by how easy the installation was given that it's rated a 10 out of 10.

I had to break two of the plastic clips because I wasn't able to pull the center button out (it was more recessed than the other 8).

The bolts holding on the impact bar are on really tight, and they can be hard to get to. I bent one of my 3/8 inch extensions before I was able to find a way to get my breaker bar onto the bolts directly.

As mentioned in the other reviews, I had trouble keeping the mounting bolts from turning in the frame rails, but I was able to get my breaker bar and a socket into the frame rail to keep the bolt heads from turning.

I think that this installation procedure (taking off the bumper and impact bar) is a lot better than having to cut into the frame rails to enlarge the holes.

The hitch feels rock solid, and I'm really happy with having it hidden when not in use. Now I just need to figure out which bike rack to get!



by:

Hitch hides well under the frame of the car and utilizes the factory bumper cover cutout for the hitch itself rather than hanging below it. I love Ike the fact that I can pull the receiver and snap in the hitch cover and the car looks stock.



by:

I replaced my UHaul brand, class 1, 1.25inch receiver hitch with this, finally. I regret not buying it before Covid, as it was cheaper then (but still pricier than what I admittedly would want to pay -- c'est la vie!)

I have a lifted 2015 Subaru Impreza, Sport Limited. I wanted to maintain my approach and departure angle while having access to my hitch. I use it mainly for my spare tire carrier, bicycle carrier and/or rear cargo tray.

DON'T perform this install by yourself. It's doable, but painfully tedious. I did not remove the rear bumper, I DID remove muffler for better access. Since the holes in the frame were already set-up from my last hitch install, I just reused the hardware there. I substituted more washers but otherwise, didn't have a need for the new hardware. For a mechanically inclined person, this still took me about 3 hours using car ramps, in my backyard. Doable, but better with an extra set off hands to help you hoist the new hitch up.



by:
2014 SubaruImpreza

I had it installed onto my 2014 Subaru Impreza, at the garage. Apparently it went on quite easily.
The hitch is quite recessed behind the bumper making it hard to put the hitch pin in place. I knew it was recessed before I bought it but didn't anticipate the problem of putting the pin in and taking it out again every time I want to take the bike rack on and off. The bike rack will probably just stay on the car from now on!



by:

Fit perfectly , installed easily. Very happy with it
Got exactly what I ordered both hitch and wiring harness.



by:
2013SubaruImpreza

1 have a 2013 Subaru Impreza Hatchback and the only option that I found on 2" was this hitch and I have to say that is great, a little bit more time consuming to get installed than the other option but way it wort the time. Perfect fit!!



by:

It took some work but its on. I can now use my Kuat NV 2.0 on my 2014 Subaru Impreza Hatchback.


25
45
Show More Reviews

See what our Experts say about this EcoHitch Trailer Hitch

  • What Hitch to Use on 2016 Subaru Outback Wagon with Thule T2 Pro XT 2-Bike Hitch Rack
    The EcoHitch for your 2016 Subaru Impreza is not the best route to go with the Thule T2 Pro XT # TH23JV due to the hitch pin design so I would agree a different hitch will be your best choice. The Curt # C11286 will be your best option as you'll have plenty of access to the hitch pin without any rear fascia panel interference.
    view full answer...
  • Will Draw-Tite 2 Inch Trailer Hitch Receiver Fit on 2015 Subaru Impreza Hatchback/Wagon
    You're really done your research here, and while we have a 2 inch receiver that fits your 2015 Subaru Impreza, we can't recommend going with one from Curt or Draw-Tite. At one point, the 2" Draw-Tite Trailer Hitch Receiver # 76084 was listed as a fit for your 2015 Impreza, so technically it will fit, but Draw-Tite removed it as an option because it hangs super low to the ground on the Impreza and there is a huge gap between the fascia and the hitch tube. So not only is there next to no...
    view full answer...
  • EcoHitch Invisi Trailer Hitch Compatibility For A 2013 Subaru Impreza Sport Hatchback
    Yes, the EcoHitch Invisi Trailer Hitch Receiver # 306-X7211 is confirmed to fit your 5 door 2013 Subaru Impreza Sport Hatchback that has the single exhaust tube. Your Impreza must have the knockout panel in the center or the lower rear fascia to use this receiver. When selecting a ball mount, bike rack or cargo carrier you will need to ensure that the hitch tube is no longer than 2-3/8” from the center of the pinhole to the end of the shank. Otherwise it may not fit or cause damage to...
    view full answer...
  • 2 inch Trailer Hitch that Fits 2012 Subaru Impreza
    We have 2 inch hitches that fit your 2012 Subaru Impreza with the part # 306-X7241 for if you have a sedan or the # 306-X7211 for if you have a wagon but the Curt you mentioned does not fit your vehicle so I cannot recommend it for you.
    view full answer...
  • Recommended Hitch for a 2012 Subaru Impreza to use a Bike Rack
    The most economically priced options for a hitch on your 2012 Subaru Impreza 5 door Wagon is going to depend on whether you have a WRX/WRX Sti or not. If you DO have the WRX/WRX Sti then the hitch that you want is the Curt Trailer Hitch Receiver # C11120. If you DO NOT have the WRX/WRX Sti then the hitch that you want is the Curt Trailer Hitch Receiver # C11286. Both of these hitches are made in the USA, have a bolt-on, no-drill installation and will provide you with a Class I, 1-1/4"...
    view full answer...
  • Recommended Platform Bike Rack Compatible With EcoHitch Invisi-Hitch on 2013 Subaru Impreza
    I'll start by saying that because the EcoHitch # 306-X7211 is a completely hidden receiver on your 2013 Subaru Impreza Sport, you're going to need to use a bike rack that has a bit longer shank and will get it out away from the vehicle in order to have full functionality. The length of the shank in front of (towards the exhaust) is still important, but the distance available behind the hitch pin hole is going to be more important in determining the functionality of the rack. Because of...
    view full answer...
  • Which EcoHitch Fits 2016 Subaru Impreza Wagon
    The correct hitch for your 2016 Subaru Impreza Wagon from EcoHitch is the part # 306-X7211. Best option would be to return the hitch you have and go with this one.
    view full answer...
  • Comparing EcoHitch and Draw-Tite Hitch for a 2013 Subaru Impreza Wagon
    The Draw-Tite Sportframe Trailer Hitch Receiver part # DT24959 (25 Lbs) and EcoHitch Invisi Trailer Hitch Receiver part # 306-X7211 (30 Lbs) are both great options for a 2013 Subaru Impreza Wagon. I recommend the EcoHitch because it has the best look once installed, offers the best ground clearance, and allows for use with the most amount of hitch mounted accessories. The only advantage of the Draw-Tite is ease of installation and weight savings (minor). The Kuat Sherpa 2.0 2-Bike Platform...
    view full answer...
  • Where Do the 8 Flat Washers Install for the EcoHitch # 306-X7211 on a 2014 Subaru Impreza Wagon
    Once the hitch is in position over the bolts hanging down from the frame you will need 2 of the flat washers per bolt instead of just 1. That is what is indicated in the instructions for the hitch: "Step 8. With all hardware properly fished into position, raise hitch onto hanging hardware. Be careful not to push bolt hardware back into frame rails. Secure bolts with two 1/2” flat washers, one 1/2” lock washer, and one 1/2” nut. Once hitch is secured and centered on vehicle, torque all hardware...
    view full answer...
  • Can Thule T2 XTR Fit 2015 Subaru Impreza with EcoHitch
    The EcoHitch that fits your 2015 Subaru Impreza Hatchback part # 306-X7211 does have a shorter distance from the pin hole to the back of the hitch tube but since the rack has an open back this isn't really an issue as the rack at worst would just stick through the hitch a bit further. The Thule T2 Pro XTR part # TH83JV you are wanting will fit this well and overall is one of the nicest and easiest to use bike racks out there so it would be a great solution.
    view full answer...
  • Trailer Hitch Recommendation for 2013 Subaru Impreza Sedan
    The trailer hitch you want for your 2013 Subaru Impreza four door is the EcoHitch part # 306-X7241. This hitch has a 2 inch opening which means that it would allow you to carry a bike rack with more than 2 bikes loaded since you mentioned wanting to carry a 3 bike rack. For trailer wiring I'd then recommend the Tekonsha kit part # 118581 which will install without splicing and has our most reliable converter box. Since you plan on doing some towing you might be interested in etrailer...
    view full answer...
  • Recommended Dirt Bike Carrier and Trailer Hitch for 2013 Subaru Impreza Sport 2.0 Hatchback
    For your 2013 Subaru Impreza Sport 2.0 hatchback, I recommend the EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2" # 306-X7211 which is rated for up to 525 lbs tongue weight. You will need to subtract from that the weight of the carrier and the dirt bike, so I recommend getting a lightweight carrier like the etrailer Motorcycle Carrier for 2" Hitches - 500 lbs # e98873 which weighs 58 lbs. This combination will give you the ability to carry a dirt bike that is up to...
    view full answer...
  • Compatibility Between Thule T2 Pro XTR And EcoHitch Invisi Hitch Receiver On A 2013 Subaru Impreza
    The EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2", part # 306-X7211, does not have a back. The stinger arm from the Thule T2 Pro XTR Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount, part # TH83JV, may extend from the back, but if it does not interfere with anything under your 2013 Subaru Impreza, like a spare tire, you will not have any issues. I have included product description links and a video review link below.
    view full answer...
  • Trailer Hitch for 2015 Subaru Impreza Hatchback
    While there is a hitch that will fit your 2015 Subaru Impreza hatchback with a single exhaust, the EcoHitch Invisi Trailer Hitch Receiver # 306-X7211 will only work if you have the knock-out panel in the center of the rear fascia (bumper). Since you mentioned you do not have that the only option will be to use a different trailer hitch, the Draw-Tite Sportframe Trailer Hitch Receiver # DT24959, which is still going to be hidden very well under the bumper. I have added a link to a video...
    view full answer...
  • What Is The Lightest Hitch Option For A 2013 Subaru Impreza Wagon
    As stated by the manufacturer, the EcoHitch Invisi Trailer Hitch Receiver part # 306-X7211 weighs about 40 lbs. If weight is your primary concern and you are willing to sacrifice the CLASS III capabilities for a CLASS I hitch receiver, the Draw-Tite Sportframe Trailer Hitch Receiver part # DT24959 will be your best option as it only weighs approximately 23 lbs and is also fairly hidden from plain sight. However, a CLASS I hitch receiver will only allow you to carry a maximum of two bikes...
    view full answer...
  • Hitch Mounted Cargo Carrier for 2012 Subaru Impreza Hatchback
    The 17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs # C18145 is able to suppor the weight of your propane tank. The bigger issue is the hitch on your 2012 Subaru Impreza Hatchback. We only have one hitch that is capable of that weight in addition to the cargo carrier weight and that is the EcoHitch # 306-X7211 which has a tongue weight of 525 lbs. No other hitch will be compatible of carrying that weight as they are all rated for a maximum tongue weight of 200 lbs...
    view full answer...
  • Availability of 2 inch Hitch for 2016 Subaru Impreza Wagon
    For your 2016 Subaru Impreza we only have one 2 inch trailer hitch and that is the EcoHitch part # 306-X7211 that you referenced.
    view full answer...
  • Can Saris Freedom Bike Rack Fit in EcoHitch of 2014 Subaru Impreza without Muffler Interference
    Yes, the Saris Freedom 2 Bike Platform Rack # SA4412B will fit and work great in the EcoHitch part # 306-X7211 that is a fit for your 2014 Subaru Impreza and has the hitch opening that comes out of the rear bumper panel. The shank of the bike rack will not extend past the opening of the EcoHitch and cause interference with the muffler at all.
    view full answer...
  • Trailer Hitch Receiver for a 2016 Subaru Impreza Hatchback That Uses Center Knockout Panel
    The EcoHitch Invisi Trailer Hitch Receiver part # 306-X7211 as the name states is almost completely concealed once installed. It installs behind the rear bumper and the receiver tube opening will be located behind the center knockout panel. It is however only offered in a 2" receiver tube opening. If you can tell me which bike rack you have I would be glad to see if they have a specific 1-1/4" to 2" adapter but if not you can use part # HT02. The other two trailer hitch receiver options...
    view full answer...
  • Hitch for 2013 Subaru Impreza Wagon that Loses No Ground Clearance
    For a hitch that fits your 2013 Subaru Impreza wagon that does not lose any ground clearance because it comes out through a knock out panel in your rear bumper we have the EcoHitch part # 306-X7211 which is a 2 inch hitch.
    view full answer...
  • Can a 2014 Subaru Impreza Carry a Motorcycle Carrier over 350 lbs Tongue Weight?
    For your 2014 Subaru Impreza, we don't have any trailer hitch rated for over 350 lbs tongue weight. I don't recommend having a trailer hitch made for your application because the vehicle is not rated for that kind of weight. Your best option to transport your motorcycle is to use a trailer hitch and trailer. I recommend the EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2" # 306-X7241 if you have the sedan or # 306-X7211 if you have the wagon with single exhaust. ...
    view full answer...
  • Fit of EcoHitch 306-X7211 On 2013 Subaru Impreza Hatchback
    If your 2013 Subaru Impreza has a single exhaust that has a knock out panel located in the fascia under the rear bumper, the EcoHitch # 306-X7211 will fit your vehicle. As you can see in the provided photos, the receiver tube will actually sit behind the bumper fascia. If you don't have the factory knock-out, you'll need to use a Class I hitch. I'd recommend the Curt # C11286 which fits single exhaust equipped Impreza hatchback models.
    view full answer...
    Image 1 for
  • Is the RidgeBack 2 Compatible with the EcoTech Hitch # 306-X7211 on a 2015 Subaru Impreza?
    The dimensions you need to consider when seeing if the Yakima RidgeBack 2 # Y02457 will clear the fascia Eco-Hitch Invisi Trailer Hitch Receiver # 306-X7211 is the 9-1/2 inches from the center of the hitch pinhole to the closest part of the RidgeBack 2. The closest part of the rack of the RidgeBack 2 is the inner edge of the circular black pivot piece. If you are worried about bumper clearance on your 2015 Subaru Impreza, the dimension from the pinhole to the inside of the mast (11-1/2...
    view full answer...
  • Length of Receiver Tube on EcoHitch X7211 for a 2014 Subaru Impreza Wagon
    The length of the receiver on hitch # 306-X7211 isn't the issue. It is were the hitch pin hole is relative to the end of the receiver which on this model is close to 1-1/2 inches. Standard is around 2 inches (on center). The receiver (approximately 3 inches long) on this hitch is open at the back so the length of the shank on the bike rack would not be a factor (unless it was excessively long) but its hitch pin hole placement will be. On the Kuat NV # NV22G the distance from the center...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Edited by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.