Will Draw-Tite 2 Inch Trailer Hitch Receiver Fit on 2015 Subaru Impreza Hatchback/Wagon
Question:
Hi there, I’m looking for a class III receiver for a 2015 Subaru Impreza wagon/hatchback. I noticed that the class 1 hitches seem cross compatible between the XV crosstrek and my 2015 Impreza. This is one of a few examples of a class 1 receiver that fits both cars. DT24959 However, the class three receivers for the crosstrek do not fit the Impreza. I’m only planning to use this for a bike rack and I’m wondering if I can make the class III receiver for the XV crosstrek fit my Impreza. The crosstrek and Impreza installation videos look identical. Thanks
asked by: John W
Expert Reply:
You're really done your research here, and while we have a 2 inch receiver that fits your 2015 Subaru Impreza, we can't recommend going with one from Curt or Draw-Tite.
At one point, the 2" Draw-Tite Trailer Hitch Receiver # 76084 was listed as a fit for your 2015 Impreza, so technically it will fit, but Draw-Tite removed it as an option because it hangs super low to the ground on the Impreza and there is a huge gap between the fascia and the hitch tube. So not only is there next to no ground clearance (especially bad for a bike rack), but it also looks really odd and truly shouldn't be used on an Impreza (since it's not technically a fit it also wouldn't be warrantied). Instead, for a hitch on your 2015 Impreza wagon/hatchback that has a 2 inch receiver, the only option really is from EcoHitch:
- EcoHitch Invisi Trailer Hitch Receiver # # 306-X7211
This hitch will fit your Impreza so long as it has the center knock-out panel in the lower rear fascia. If not, the best option for a hitch will be the Class I Draw-Tite Sportframe Trailer Hitch Receiver # DT24959.
The Draw-Tite # DT24959 has the best ground and bumper clearance of the Class I hitches that fit your '15 Impreza, making it the best for bike rack use, and I have added a link below to a video install for you to check out as well.
Products Referenced in This Question
EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Completely Hidden
- EcoHitch
more information >
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Difference Between Hollywood Racks # HR1450Z and # HLY84FR Bike Racks
- Q&A: Comparing the Hollywood Racks Sport Rider SE 2 and Swagman Chinook
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Dometic Water Heater Solution to Replace Atwood Water Heater for RV
- Q&A: Is Dometic 6-Gallon RV Water Heater DMC74FR Best Option For Tanked Water Heater
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Availability Of Adapter To Go From 1-1/4" Hitch To A 2" Hitch
- Q&A: Recommended Tire Chains for 2014 Subaru XV Crosstrek
- Article: Most Popular Wheel Bearings
- Article: Trailer Hitch Installation Tips
- Article: My Trailer Hitch Doesn't Fit
- Article: Best Bike Racks for Electric Bikes
- Article: Trailer Wiring Diagrams