etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e98862
Retail:$277.31
Our Price: $181.67
You Save: $95.64
Confirmed to Fit
2001 Honda Odyssey
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (695)
- Q & A (0)
- Photos
2001 Honda Odyssey - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- 2 Inch Hitch
- Class III
- 3500
- Visible Cross Tube
- etrailer
- 350
- 5000 lbs WD GTW
- 500 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Honda Odyssey's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 5,000 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 500 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e98862 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.
Tongue Weight (TW):
350 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Gross Towing Weight (GTW):
3,500 lbs.
Tongue Weight (TW):
350 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Tech Tip
Some models have underbody fascia covering the driver side frame. This will be removed and can be left off or trimmed and reattached. No drilling required for installation
Complete Towing Package for 2001 Honda Odyssey
Retail:$361.39
Package Price:$244.53
2001 Honda Odyssey Owners Who Purchased This Trailer Hitch Also Bought...
Popular Odyssey Trailer Hitch Accessories
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
- Arrived Damaged
- Wrong item was ordered
Customer Reviews
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98862
Average Customer Rating: 4.8 out of 5 stars (694 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.by: jmk07/19/2022
2014 HondaOdyssey
So far so good. Took approximately an hour to install, including unpacking the hitch and cleaning out the weld nuts. While potentially possible to install on your own with strategically placed supports, it's more realistic to install with two people, even if one of them is just lifting, steadying, and holding the hitch in place while you do all the work. Everything lined up perfectly. Didn't even need to put the van up on ramps. Trimmed the plastic fascia on the driver side as shown in the video instructions and worked like a charm to reinstall.
Test fit our bike rack (which is our primary intended use) and everything fit snuggly. So far, very happy with the purchase.
by: Waltee05/29/2024
This was an easy DIY install. The wiring was the best! No stripping wires, just plug and go.
by: Karen A03/12/2023
HondaOdyssey
etrailer was recommended to us by the bicycle shop where we were purchasing our bike rack. I checked online and sent a copy of the description of the hitch from the etrailer website to my mechanic and he said he was familiar with their products and yes, it would fit my Honda Odyssey perfectly. He installed it in about an hour and no welding was required; totally bolt on. I have been using it for about a year now and it is a perfect match for our rack. I saved several hundred dollars on the hitch and even more on the installation since it was so easy for the mechanic. Very happy with the product and service and would highly recommend etrailer
Karen A.
3/13/2024
Were still very happy with this product. We use it often and have never had any issues whatsoever. Still highly recommend this trailer hitch.
by: Chuck M.03/23/2024
2013 HondaOdyssey
Doing it by myself took a little longer but it went smoothly but his 66-year-old man was able to install the hitch single handed. I found the jack stand worked well to hold up the driver's side while I started the bolts on the passenger side.
I also had to make a second cut on the panel so it would fit around the hitch.
I was able to get it installed and it is ready to go.
by: Joshua11/08/2023
2016 HondaOdyssey
I was very impressed with etrailer in nearly every facet. I ordered on a Sunday night and received my hitch Wednesday and it was installed same afternoon. Looks great, and seems to be very well made. I watched the etrailer installation video prior to beginning and it told me everything I needed to know. Very easy install.
However, not sure if it was UPS or the way it was packaged but the hitch looked like it’d been through war to get here. Thankfully as thick of metal as this is I don’t think it affects the integrity, but it was still disappointing.
Katrina D.
11/11/2023
I understand that disapointment. We generally recommend that you will want to cover up any scratches and/or chips with some sort of rust-o-leum type of paint. This will help prevent any corrosion forming on the hitch. You also should be eligible for a paint credit from us, let me get you over to our customer service department for them to look into that for you
by: Diane 05/20/2024
My friend installed it in less than an hour. It fits perfectly on my minivan. I attach a heavy duty bike rack, which carries two e-bikes on it and it holds up. Attach and detach this bike rack three times a week with ease
by: Chris W02/14/2024
California to Florida and back!
Trailer was everything we hoped for and more. It was extremely easy to install. Very sturdy and provided the space we needed for our Costco storage bins.
We added reflective tape for safety purposes and used straps to keep it all in place. I highly recommend this product.
by: Sanders10/27/2022
2007 HondaOdyssey
Sturdy. Easy Peasy Installation.
I backed my 2007 Honda Odyssey up onto my shop ramps, set the brake and began. I cut a "dead man" from a 2x4 about 23 1/2" overall, and used it to hold the driver-side up, while I worked the hitch over the tailpipe on the passenger side. The bolt holes were about 1/4" shy, so I used a camp hatchet to pry/spread so that the bolt holes lined up. I fished the spacer and carriage bolt with pure ease, and began the tightening all bolts. Total install time: 22 minutes. For this "less-than-shade tree mechanic", I was very pleased!
Sanders
10/28/2023
1 year
by: Tim 04/10/2024
Easy to install and fit perfectly. It was helpful to have a second person so each of us could hold half of it while it was being put on the van. I appreciated the videos and instructions specific to my vehicle. Made it much easier to know how to install it.
by: John H.12/23/2023
Holes were not aligned (~1/4 inch off). I think the hitch flanges got bent inward from shipping (box had some damage where it looked like the hitch was dropped on flange end?).
Other than that great product/install. Was very impressed with how well the fishing method worked.
Katrina D.
12/23/2023
It is very common for hitches to flex during shipment. Hitches are made with some flexibility so that they flex with the vehicle while towing. Otherwise the rigidity may cause them to fracture. I have a link attached with some information on how to correct this flexing.
Helpful Links
by: Kevin03/01/2023
So easy to install. Everything lined up perfectly with no adjustments required. Shape is nice and looks good on the Odyssey. Had my dad help me, just because I enjoy doing stuff with him. It really is a one person install though. The whole procedure, down to the wire that pulls the carriage bolt through is very well engineered, and very well thought out. Easiest hitch install we've every done by far. Put a carrier in to see how the spacing is and it works perfectly.
by: Richard 05/26/2024
2015 HondaOdyssey
Great quality, easy installation, very helpful video!
by: Sam 12/17/2023
2010 HondaOdyssey
We have only used it once but it is very sturdy. We had some rusted spots on our 14 year old van, but with some extra parts, it was installed well. Our main use is for a bike rack and it is perfect for that. I do like the Matte Black finish a lot
by: Benjamin04/13/2020
This hitch was super easy to install, the videos online were extremely helpful when installing. Make sure that the weld nut threads are clean of rust and debris, as the two on the passenger side of mine were rusted and needed a lot of cleaning. Also putting a bolt in and threading in and out and cleaning with WD 40 helped for a much easier install. The hitch fits up nicely against the bottom of the bumper, there is no reason not to be pleased with this hitch. Great product!
Benjamin
4/14/2021
Hitch has been great, no rust. I am still pleased.
by: Greg12/12/2023
Very good fit and finish. Easy to install. This is the third one I’ve purchased from etrailer and have been very pleased with the performance of the product as well as the company. The installation videos were very helpful.
by: Reeves08/09/2023
I only used this hitch for a few months before I was rear ended by a man reading his cellphone while driving. He was driving a F250 super duty, and I was in a Honda Odyssey. My bike rack was connected to the back at the time, and the body shop said that the hitch plus bike rack likely saved me and my wife’s lives because they took the brunt of the impact. Please people—don’t text and drive, and don’t drive giant trucks unless you can actually handle them. I’ll be forever grateful that I had this hitch.
by: Darin 11/25/2023
HondaOdyssey
This thing is solid, easy enough to install by myself following the instructions, have towed my trailer with a side by side using my Honda Odyssey, I love it. Great price, great quality, glad I made this purchase.
by: Paul05/24/2022
Unit didn’t fit exactly. Angle of weld was off by just enough to require cutting out slot of 2nd bolt hole on one side.
Lucky I have those tools/skills or it would have been returned.
Crazy heavy duty unit but there is inches of room there to work with and the tolerances are obviously not tight enough. See pics. Other side was pushed to tolerance level (about 1”) and side shown was still not capable of bolts 2 and 3 to pass through. Had to grind out u hole to a ‘slot’ by grinding out metal from outside to slot.
Sierra K.
5/26/2022
It sounds like your hitch was flexed. I will attach a help article regarding flex. It also sounds like your weld nuts needed cleaned, as they can sometimes have debris and rust in them. The instructions say no drilling is required and that the passenger side needs lifted over exhaust first.
by: Melissa 09/06/2022
Easy to install, appreciate the videos. Looks clean on the underside of the van, has been a game changer with our adventures in the minivan!
Melissa
9/7/2023
We’ve been hauling our pop up trailer with our minivan and I couldn’t be happier! It was easy to install and is really well made.
Mike L.
10/31/2023
@Melissa That's great! We're happy to hear that your # e98862 etrailer brand trailer hitch is still working well for you.
by: Jeremiah 03/26/2023
2011 HondaOdyssey
Bolted right on thanks
Jeremiah
3/27/2024
Went across country with no issues
by: Susan12/06/2021
this is a gift and i wont know till after christmas if it fits. i only complaint was the shipping box was severly damaged by the shipper and i was worried the mounting hardware woud be missing because of the holes inn the box. thankfully the mounting hardware was taped to the reciever hole.. as per your review, i cannot successfully upload photos
Jenny N.
12/7/2021
I will have our customer service team reach out to you.
by: JB.10/24/2023
Excellent product. Very happy with this hitch. The installation was easy. I have used this for 1 year with no issues. etrailer has great products.
by: Alan07/27/2021
The trailer hitch is awesome. I installed on our 9 year old 2011 Honda Odyssey. Like mentioned in other reviews, I had to purchase a tap ($x from [Hardware store]) and used silicon lube, even though the holes looked clean. I just had to periodically spray the lube into the tap's channels and installation was easy. See photos. I tried without the tap and it was impossible.
by: Jimmy 03/28/2024
Good hitch. Great service.
by: Emile10/12/2023
2014 HondaOdyssey
The product came as advertised. I watched the installation video on the etrailers website and had no trouble installing it.
25
695
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch
- Highest Capacity Hitch for a 2005 Honda Odyssey Our highest capacity hitch for your 2005 Honda Odyssey is the etrailer Trailer Hitch Receiver item # e98862. This hitch is custom fit and bolts to your Honda with included hardware. This hitch has a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 350 lbs. I have linked an installation video below. If you are ever towing you will also need a wiring harness item # 118438 and a ball mount kit item # C45534. I recommend adding the Coil SumoSprings Custom Helper...
view full answer... - Recommended Trailer Hitch for 2003 Honda OdysseyFor a trailer hitch for your 2003 Honda Odyssey, I recommend our etrailer Trailer Hitch Receiver # e98862. This trailer hitch has a 2" hitch receiver with a gross towing weight capacity of 3,500 lbs and a tongue weight capacity of 350 lbs. Check out the video linked below for more details.
view full answer... - Ground Clearance of Trailer Hitch Options for 2014 Honda OdysseyFor your 2014 Honda Odyssey, the etrailer # e98862 has a ground clearance of 10.75 inches. The Draw-Tite # 75270 has 10 inches clearance. The Draw-Tite # 76025 has the best ground clearance at 11 inches.
view full answer... - Parts Needed for Towing With 2003 Honda OdysseyI took a look at the owner's manual for your 2003 Honda Odyssey and found that the maximum trailer weight for an Odyssey that has no more than 2 passengers weighing 150 lbs each is 3,500 lbs. With more passengers the trailer capacity goes down; you can see this on page 275 of the manual. Additionally, that weight will require you to have a transmission cooler such as the Derale # D13503 according to the manual. You are also going to need a trailer hitch, and I recommend part # e98862....
view full answer... - Recommended Trailer Hitch for a 2011 Honda Odyssey Thanks for the picture! Yes, you will have no problem pulling a bass boat out of the water with the etrailer Trailer Hitch Receiver item # e98862. This hitch is custom fit and bolts directly to your 2011 Honda Odyssey with included hardware. This hitch has a 2" receiver and a 3,500 lbs towing capacity. I did a quick search and it looks like your Odyssey has the same capacity. I recommend verifying this with your owners manual. We had a 2011 Odyssey in the shop awhile back and I included...
view full answer...
- Recommended Bike Carrier For a 2006 Honda Odyssey Carrying A RadWagon 4 Electirc BikeYes, your RadWagon 4 will work with the etrailer Aluminum Motorcycle Carrier for 2" Hitches # e56UR when used in conjunction with the Ratchet Tie Down Straps w/ Storage Bag # ETBMB-05852. This motorcycle carrier has a maximum weight capacity of 400-lbs, measures 79" long x 8-1/2" wide, and has a 7" wide track which is plenty to accommodate your bike. The only thing you're going to need to make sure is that you have a hitch that can handle the weight of your bike like the etrailer Trailer...
view full answer... - Comparing Trailer Hitch Options for a 2015 Honda OdysseyThe trailer hitch which offers the most amount of ground clearance for a 2015 Honda Odyssey is the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76025. That said, it does require removal of the rear bumper so if this is not something you want to do I recommend the etrailer Trailer Hitch Receiver part # e98862. There are few discernable differences between respective Curt, etrailer, and Draw-Tite options. The etrailer hitch however has more of a matte finish which blends in better.
view full answer... - Recommended Trailer Hitch Receiver for 2016 Honda Odyssey Pulling Small Enclosed TrailerFor your 2016 Honda Odyssey I recommended the etrailer Trailer Hitch Receiver # e98862 for using either a cargo basket or for pulling an enclosed trailer. This is a Class III 2" receiver. The receiver is capable of 350lbs of tongue weight and 3,500lbs towing. With a weight distribution hitch the receiver is capable 500lbs of tongue weight and 5,000lbs towing. Be sure not to exceed the manufactures rating for towing on your Odyssey. You should not need a brake controller if your trailer...
view full answer... - Recommendation Between the Thule Camber 4 and Yakima Ridgeback 4 Bike CarriersThe etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98862 you referenced will have the hitch pin hole recessed 4-1/2 inches from the outer bumper. This will allow for compatibility with both the Thule Camber or the Yakima Ridgeback you referenced. The biggest difference between the two bike carriers for your application is the arm spread distances. The Thule Camber # TH9056 has outside cradle to outside cradle measurement of 13 inches. The Yakima...
view full answer... - What Model Year Honda Odyssey's Does The etrailer Trailer Hitch Receiver # e98862 Fit? Our etrailer Trailer Hitch Receiver # e98862 is custom fit for the 1999-2017 Honda Odyssey. Be sure to get a Replacement Hardware Kit # RHK if you are reinstalling it on another vehicle.
view full answer... - How Will I Know What Size Ball Mount Receiver I Need Without Having A Trailer Yet?Looking at the different trailer hitch receivers that we offer I see that most will have a hitch height of 12-16" on the 2008 Honda Odyssey. We do list the heights of the receivers in our installation videos. If you do not yet have a receiver I recommend our etrailer Trailer Hitch Receiver # e98862. This receiver will have a height of 14" and a 2" receiver. The 2" receiver is great because it will give you more ball mount options as well as hitch accessories. Most 5'x8' trailers will...
view full answer... - What is Needed to Add Trailer Hitch to 2009 Honda OdysseyIf you only want to add a trailer hitch to your 2009 Honda Odyssey for something like a bike rack or cargo carrier all you need is the hitch itself, the etrailer Trailer Hitch Receiver # e98862. But if you wanted to use it for towing a trailer, you would also need to add wiring, the T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56161.
view full answer... - Recommended Trailer Hitch and Weight Distribution System for 2007 Honda OdysseyThe etrailer Trailer Hitch Receiver part # e98862 is what I recommend for a 2007 Honda Odyssey. It offers a bolt-on fit without any drilling and it will be great for towing. It can also be used with a weight distribution system like the Blue Ox 2-Point Weight Distribution part # BLU72XR which is what I recommend. Please note, it looks like there is a lot of stuff on the frame of your Aliner so you'll need to be sure you have space at around 28" back from the center of the coupler.
view full answer... - Is Fascia Trimming Required To Install Draw-Tite Hitch On 2014 Honda OdysseyIn order to install the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76025 on a 2014 Honda Odyssey you"ll need to trim the fascia in the center to allow the receiver tube opening to pass through and above the tail pipe. The reason you must trim the portion of the fascia above the tail pipe is that the hitch will come into contact with this piece if not remove. It is possible not to remove this piece but by not doing so you"ll put stress on other parts of the bumper which can lead to...
view full answer... - Replacement Hardware for Curt, Da'Lan, Draw-Tite, etrailer, Hidden Hitch or Reese Trailer HitchesYes, we do sell just the hardware for Curt, Da'Lan, Draw-Tite, etrailer, Hidden Hitch or Reese trailer hitch receivers. You will want the Replacement Hardware Kit for Trailer Hitches item # RHK. This will give you all of the nuts, bolts, spacers, and even a fish wire tool if your hitch requires them for install. The bolts will be of the correct grade too so you won't have to worry about a parts failure. You will need to know your hitches part number. When you go to the Replacement Hardware...
view full answer... - What is the Size of the Mounting Bolts etrailer Trailer Hitch Receiver # e98862 for 99-17 Odyssey? The etrailer Trailer Hitch Receiver # e98862 attaches to a 1999 - 2017 Honda Odyssey with four M12-1.25 x 35mm bolts and one 7/16-14 x 1-1/2" carriage bolt and nut utilizing a square hole spacer. We do offer the Replacement hardware Kit # RHK if you would like to get all the replacement hardware.
view full answer... - How To Carry Two 76lb Kayaks With 2014 Honda OdysseyI may have another option, but since your two Old Town Sportsman 106 PDL kayaks weigh 76lbs each, and the roof rack weight capacity on your 2014 Honda Odyssey is 165lbs that only leaves you 13lbs available for the weight of the kayak carriers. Using two of the etrailer J-Style Kayak Carrier - Folding - Universal Mount # e98878 would add roughly 20lbs and would push you over the weight rating of your roof rack. Instead I recommend using a kayak trailer like the Malone EcoLight Sport Trailer...
view full answer... - Can I Haul a Power Wheel Chair On a Cargo Carrier While Trailer Towing With a 2014 Honda Odyssey? By using the Malone 2" Dual Purpose Hitch Receiver # MPG544 this will reduce your receiver capacity by 50%. To determine your exact capacity you will need to find the capacity rating on your receiver. Honda may be giving you the maximum capacity your 2014 Odyssey is capable of supporting on a receiver. We have the etrailer Receiver # e98862 with a tongue weight rating of 350lbs or the EcoHitch # 306-X7253 with a tongue weight rating of 525lbs. As the Dual Hitch # MPG544 will reduce either...
view full answer... - Recommended Trailer Hitch Receiver And 4 Bike Rack For 2012 Honda Odyssey Since you are wanting to carry 4 bikes with your 2012 Honda Odyssey you will want to make sure that you choose a 2" trailer hitch receiver like the etrailer Trailer Hitch Receiver # e98862 as it will give you the most options when it comes to bike racks for carrying 4 bikes. For a bike rack I recommend the Saris Freedom 4 Bike Platform Rack - 2" Hitches - Frame Mount # SA4414B which will allow you to carry 4 bikes with the inner two bikes weighing up to 60lbs each, and the outer two weighing...
view full answer... - Trailer Hitch for a 2017 Lexus RX 350 and 2011 Honda OdysseyI do have options for you but trailer hitches are designed for exact applications and are very rarely cross-compatible with different vehicles for the exception of those that share the same frame. The trailer hitch I recommend for a 2017 Lexus RX 350 is the Curt Trailer Hitch Receiver part # C13272 and the trailer hitch I recommend for a 2011 Honda Odyssey is the etrailer Trailer Hitch Receiver part # e98862.
view full answer... - Trailer Hitch Suggestions for 2008 Honda Odyssey, Class II or Class IIIGreat question, the short direct answer is primarily receiver size, 1-1/4" versus 2". The physical weight of a Class II hitch for a passenger vehicle versus the physical weight of a Class III hitch is going to be negligible, as in single digit pounds if any difference at all. A Class III hitch for passenger vehicles will have a 2" opening, this receiver size is what I always recommend first as it provides greater options for the future. The exact weight of each of the hitches you identified...
view full answer... - Bike Rack Recommendation For Easy Cargo Area Access on 2015 Honda OdysseyHollywood Racks doesn't recommend opening the rear hatch or trunk of a vehicle once a rack has been installed for many reasons. First and foremost, it's an unsafe practice. The struts that hold up the liftgate on a minivan are only rated for a certain amount of weight. Having the extra weight on the liftgate could cause it to slam shut without warning, which could be extremely dangerous. Opening and closing the liftgate while it's installed can also damage the vehicle or the rack. If having...
view full answer... - 2009 Honda Odyssey Recommendation for Carrying 3 BikesI definitely have some options for you but ultimately I recommend going with a hitch mount rack as it gives you a wider variety of bike rack options and it's much easier to load bikes at the back of your 2009 Honda Odyssey than on top of it. Since you mentioned a roof rack I'll start off with those parts. For a roof rack I recommend the Malone AirFlow2 Roof Rack # MPG216 which clamps onto the raised rails of your Odyssey and gives you 58" of crossbar space to use. For a roof bike rack...
view full answer... - Best Hitch Receiver w/ Ground Clearance for a 2012 Honda OdysseyI have a solution for you but they don't give us that information. I can tell you that the side to side bolt hole spacing of the etrailer Trailer Hitch item # e98862 is 56.13", center to center. This is the frame width measurement. The bolt holes on each mounting flange are 3.18" apart, also measured center to center. I've shown these dimensions on the photo I have linked below of the diagram I made. Additionally we had a 2012 Honda Odyssey in and we took some measurements off of it once...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video by:
Joshua S
Video by:
Zach D
Video by:
Jonathan Y
Video by:
Schuyler H
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Chris R
Test Fit:
Randy B
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Updated by:
Wilson B
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jmk
9/4/2023
Still very happy with the hitch. We use it for our bike rack and it handles the weight of 4 bikes plus the rack and still feels secure. No complaints. Wish I bought it earlier in the vans life!