Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2"
Item # C15810
Retail:$657.95
Our Price: $391.94
You Save: $266.01
Confirmed to Fit
2006 Ford F-350 Super Duty
Pickup
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (172)
- Q & A (0)
- Photos
2006 Ford F-350 Super Duty - Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2"
- Class V
- 2-1/2 Inch Hitch
- 20000
- Visible Cross Tube
- 2700
- CURT
- 20000 lbs WD GTW
- 2700 lbs WD TW
- Custom Fit Hitch
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your Ford F-350 Super Duty's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Carbide black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2-1/2" x 2-1/2"
- Rating: Class V
- Maximum gross trailer weight: 20,000 lbs
- Maximum GTW when used with weight distribution: 20,000 lbs
- Maximum tongue weight: 2,700 lbs
- Maximum TW when used with weight distribution: 2,700 lbs
- Maximum gross trailer weight: 20,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
15810 CURT Class 5 CD Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
20,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
20,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Gross Towing Weight (GTW):
20,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
20,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Tech Tip
Spare tires 20" and larger will not be able to be stored in the original location underneath the vehicle. No drilling required for installation , Spare tire will need to be lowered or removed temporarily for hitch installation
Complete Towing Package for 2006 Ford F-350 Super Duty
Retail:$830.04
Package Price:$500.59
2006 Ford F-350 Super Duty Owners Who Purchased This Trailer Hitch Also Bought...
Popular F-350 Super Duty Trailer Hitch Accessories
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" - C15810
Average Customer Rating: 4.8 out of 5 stars (172 Customer Reviews)
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Steve04/24/2024
FordF-350 Super Duty
The box was destroyed but other than some missing paint I don't think anyone could hurt this hitch because it's a tank. I would like suggestions on what paint to use for touching up the scratches.
I bought it to replace the 2 1/2 inch OEM hitch (2015 F350) which is nowhere near this capable. I'm looking forward to installing it and no longer worrying about tongue weight limitations. As always thanks etrailer! You remain one of the best companies I've ever dealt with.
by: Kevin02/28/2024
Well built hitch and very easy to install. Needed a hitch capable of towing a 12K loaded toy hauler and this hitch easily handles the load. Very happy with it after using it for the last year.
by: Robert03/30/2023
Wanted a 2.5 receiver for my 2001 Super Duty. Went through two different DrawTite receivers first. The first one had a crooked receiver tube. Never tried to install. The second one I tried to install but it hit the bumper before being able to tighten up to the frame. etrailer was great about sending prepaid labels to ship back. Just a pain to have to re-wrap and take to UPS drop-off. etrailer would not send the Curt as a replacement. Got credited for the DrawTite hitch and I ordered the Curt Hitch. Had it installed in 20 minutes. Factory wiring harness mount bolted right up. Curt hitch is well built and seems to have a better finish than the DrawTite.
by: Corey 04/22/2024
Seems to be good so far the powder coating or paint is still in good shape and we get alot of salt on our roads, so that’s a plus and so far the pin hole has not wallowed put I don’t tow super heavy 10kish but it’s been good so far
by: Jimmy D12/09/2023
2006 Ford F-250 Super Duty
I used this to replace my factory Ford 2 1/2 inch hitch. This thing is twice as heavy and has a lot more rating. I strapped this monster to my motorcycle jack and installed by myself. I tow a 26 ft. deck over triple axle trailer. Thank You.
by: Dwain11/08/2023
The hitch is working great. The reason I didn't give it 5 stars is because I had to use some bolts & hardware off of the old hitch. The new hardware didn't fit in some places due to tight clearances. But I was able to install it fine. Thanks for checking up. This reminds me that I need to get back up there & check to make sure everything is right & tight!
by: William 09/13/2023
So far so good! Easy installation and fit my truck as advertised. With proper 2-1/2" hitches (vs adapters) the connection is solid. I'll never exceed the capacity of the hitch receiver, so I expect it to last. A few rust bits where the coating has been disrupted, but so far holding up to New England winter/dirt roads
by: Michael 03/07/2024
My hitch came in 2 days and was exactly as described. Super happy with e trailer. Love the instruction videos, very helpful.
by: Duzzi06/03/2024
Its been a very solid hitch for my 99 f350 7.3 SRW diesel.
I have towed a 14k dump trailer with a SY35U mini excavator with 2 buckets in it and its been exactly what I needed!
by: Joshua L07/08/2017
2008 Ford F-250 Super Duty
Curt receivers are great quality, plus etrailer had my order shipped the same day and was delivered the next day!
One lesson learned for me was this particular hitch (15810) does not fit with the spare tire on a 2008 F-250.
Thanks again for a great product and extremely fast shipping and customer service! I definitely recommend using etrailer over large box stores.
by: Andrew C02/04/2017
2000 FordF-350 Super Duty
The hitch has held up nicely for the year that I have had it on my truck. It is very stout. The paint has held up well to the elements so far.
It went on fairly easily and all of the holes lined up. It was helpful to have a second person to help hold the hitch in place in order to get the first bolts in.
I purchased this hitch when I realized that the hitch that came with my truck was only rated at 3500lbs, a fair bit less than the trailer I tow..
The box that it came in barely held up to the shipping monkeys on the way out to the Seattle area.
by: Dwayne05/08/2019
1999 Ford F-250 and F-350 Super Duty
The Curt 20,000 pound commercially rated receiver is is built like a battleship! And while it was difficult to man handle alone, I was able to install it using the eight supplied bolts in about 20 minutes. The fit was positively perfect, so someone at Curt did their homework on the design. The only complaint I have is that unlike my Reese Hitch, it did not include the 2" reducer sleeve. A lousy $15 difference! Don't be cheap, for this kind of money it should be included. Now I get to pay $25 in shipping for a $15 part.
by: Steve C.05/31/2017
2017 Chevrolet Traverse
Ordered Thursday evening just before Memorial Day weekend, and arrived Tuesday afternoon. Was shipped out very quickly with update emails through the entire process! Although the box was a bit torn up from shipping the hitch was still in great shape with all hardware and the wiring for another vehicle I ordered, in the box. Hitch is amazing quality, VERY heavy duty, and bolted right into place! I did have to forgo the nice factory wiring/plug mount and zip tie them into place, but other than that it was a perfect bolt on affair! Will definitely do business with these folks again
by: Kylie06/06/2024
Great product and fits great
by: Jeffrey06/16/2023
2006FordF-350 Super Duty
Item was delivered quickly with all the bolts and it fit my truck perfectly.
by: Stefan08/10/2022
Excellent build quality and installation was very easy. Needed an extra set of hands during install due to the weight of the receiver.
by: Brandon B08/03/2023
Awesome website, they made the process simple, kept me updated with emails, and delivered the product on time. Companies like this that handle their end, and keep good communication are things we need more of. 10/10
by: Robert 03/07/2024
All around great first time experience! Mike was great and the product showed up way before I was expecting and it fit perfectly.
by: Joss10/05/2023
2005 FordF-350 Super Duty
This unit fit so perfectly on my 2005 f-350 srw. Once again I'm impressed with this company and how quick it came in. Anything I ever need for a trailer I will do business with these people
by: Loren04/17/2020
1999 Ford F-250 and F-350 Super Duty
Heavy duty receiver. Easy install, but definitely need two people because it is heavy. Will handle all my trailers.
by: Keith 03/22/2024
Thank you very much!
by: Brian 06/21/2023
2001 Ford F-250 Super Duty
Fits the 2001 Ford F250 really well. It's quite a bit larger than the class 4 hitch we removed.
by: Kevin 07/29/2023
Order came super quick, looks and fits great! Was able to do by myself with help from a strap and a couple clamps.
by: Jackson 10/27/2023
I’ve never had any issues with the hitch, it’s very solid for heavier towing, all around a good product
by: Doug G07/12/2013
2002 Ford F-250 Super Duty
Great solid hitch. Easy to install on 02 F250. Is tight around factory wiring receiver and have to nudge spare forward to go up all the way. Make sure you run the nut all the way up and down the bolts with a wrench before trying to put them on the truck, the zinc coating makes it really tight. Use the red locktite after aligning the hitch with the frame as extra assurance.
Doug G.
7/12/2014
so far only used it to pull a tree out! it definitely stiffens the [rear] end up nicely though after not having a hitch for a while and noticing the frame twist.
25
172
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Comparing Curt Trailer Hitches for a 2001 Ford F-350The difference is that Curt trailer hitch # C15845 is designed to fit cab and chassis style trucks and # C15810 is designed to fit regular pickup truck models. Cab and chassis trucks are the ones you might see on a lot that do not have a bed on them. They turn those into service trucks, utility trucks, and emergency vehicles. The frame rails are closer together on cab and chassis trucks than on regular pickup models. The frame width on a cab and chassis model 2001 Ford F-350 will be 34...
view full answer... - Trailer Hitch Extension and Weight Distribution for 2015 Ford F350 With Truck Bed CamperIf your 2015 Ford F350 has the 2-1/2 inch hitch, you can use the Reese Titan # RP45292 Hitch Box Extension and Reducer. The extension is designed so that it can either be used in its 34 inch configuration or be cut down to 24 inches in length, which is perfect for your needs. When cut down to 24 inches, the extender has a 6000 lb towing capacity or if used with a weight distribution system, the capacity increases to 8000 lbs which would work well. If your truck has a 2 inch hitch, replacing...
view full answer... - Which Class V 2-1/2 inch Hitch Would Fit 2000 Ford F-350 Cab and ChassisI have a Curt Class V 2-1/2 inch that fits your 2000 Ford F-350 cab and chassis with the # C15845 but the # C15810 was not designed to fit the narrower cab and chassis truck frames so it would not work for you. We've spoken with Curt in the past about the fuel tank you have and they said this hitch was designed to accommodate the tank.
view full answer... - How Do Custom Rear Camper Tie Downs Mount to Aftermarket Trailer Hitch on 2002 Ford F-350Basically you will need to drill into the side plates of Curt hitch # C15810 to install TorkLift custom rear camper tie downs # TLR3500 on your 2002 Ford F-350. I have included a link to the installation instructions for the tie downs for you. I have also linked a video showing an example installation on a different vehicle that takes the same tie downs.
view full answer... - Recommended Hitch for 2006 Ford F-350 Towing Dump TrailerFor a hitch that can handle that much weight I recommend the Curt Trailer Hitch Receiver # C15810. This is a Class V hitch with a maximum gross trailer weight of 20,000 lbs and max tongue weight of 2,700 lbs. However, if you have a spare tire 20" or larger it will not be able to be stored in the original location under the truck. Make sure to consult your owner's manual to find the towing capacity for your F-350. The most the 2006 can tow is 15,000 lbs, but for some models the capacity is lower.
view full answer... - Recommended Class V Hitch for 2001 Ford F-350 Long Bed PickupThe Curt # C15845 Class V hitch you'd looked at fits cab and chassis model trucks only, because cab and chassis trucks use a narrower frame spread (outside to outside distance between frame members) than the pickup models do. For a 2001 F-350 Long bed pickup, use the Curt Class V hitch, part # C15810. The hitch has the same 20K towing 2.7K tongue weight capacity and 2-1/2 inch receiver as the hitch you'd looked at, but it will fit your frame spread. The hitch will install using existing...
view full answer... - Does Curt Hitch C15810 Fit 2006 Ford F-350 King RanchHey Paul, yes we have confirmed with Curt that the hitch part # C15810 does fit your 2006 Ford F-350 with a 36 inch frame.
view full answer... - Recommended Trailer Hitch Extension for 2004 Ford F-350 with Truck Bed Camper Towing a TrailerHitch extensions over 18 inches aren't very common because of the stress and torque they put on the trailer hitch and vehicle frame. For a 30 inch extension, the first place we will want to start is with your truck's trailer hitch. In order to find an extension this long, you must have a Class V trailer hitch with a 2-1/2 inch hitch opening. If you don't already have a Class V hitch, then I recommend the Curt Class V Trailer Hitch, # C15810, because with this hitch you can use the Curt...
view full answer... - Is Curt Trailer Hitch C15810 Compatible With 2010 Ford Super Duty With Ranch Hand Bumper?I checked with Curt and can confirm for you that the Curt Trailer Hitch # C15810 will work with your 2010 Ford F-250 or F-350 Super Duty King Ranch that has a Ranch Hand Bumper. Please note that spare tires larger than 20" will not be able to be stored in the original location under your truck with the use of this hitch.
view full answer...
- Will Curt Class V Hitch # C15810 Fit a Ford F-250/F-350 With a Full Size Spare TireI spoke with my technical contact at Curt and he informed me that the Curt Hitch # C15810 will fit spare tires with a wheel size of less than 20 inches. We happen to have a Ford F-350 on site, so we checked out the spare tire underneath and it was a 275/70 R18, which is a full size spare tire for the vehicle and it has an 18 inch rim, so the Curt # C15810 that you are wanting would fit the truck we have here. If you check the tire size of your spare and it is under 20 inches, this hitch...
view full answer... - Replacement Hitch Mounting Hardware For a Curt 15810 Trailer HitchWe do have the replacement hardware needed for your Curt Trailer Hitch Receiver # C15810. You will need to use the Replacement Hardware Kit for Trailer Hitches # RHK and input the 15810 in the box that says "Hitch Item Number".
view full answer... - 7-Way Mounting Bracket Recommendation for Use with Curt Trailer Hitch C15810The Curt hitch part # C15810 does not have a bracket built into it for mounting trailer wiring. Since your truck has a 7-way what you'd want is a 7-way mounting bracket like part # HM48625 which will attach to the bumper of your truck and allow your 7-way to attach to it. Don't install this on the hitch though as you shouldn't ever drill into the hitch.
view full answer... - Drop Measurement of Curt Class V Trailer Hitch # C15810The drop of the Curt Class V # C15810, which is the distance from the top of the hitch crossbar to the underside of the vehicle frame where the hitch mounting flanges attach to the vehicle is 5.63 inches. The distance from the face of the receiver to the first two mounting holes is 12-1/2 inches, as you can see in the photo I've edited for you. I've linked you to an install video, which you can view by clicking the provided link.
view full answer...
- Hitch and Extension Recommendation for 2001 Ford F-250 Towing Boat Trailer with Camper in BedThe longer hitch extensions we offer that are designed for your application of a truck with a camper in the bed wanting to tow all require the vehicle to have a 2-1/2 inch hitch installed. So for your 2001 Ford F-350 you would need to install the Curt hitch part # C15810 so that you could use the hitch extension part # C45048. This extension can be used in a 24 inch length or a 34 inch length.
view full answer... - Trailer Hitch Receiver Class V for 2006 Ford F-350 with 40 Gallon Tank Behind AxleThe Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" # C15810 is a confirmed fit for a 2006 F-350 Super Duty. The fuel tank location you gave is normally for a Cab and Chassis model according to my contact at Curt, so you will need the # C15845 instead if your vehicle frame is 34 inches wide outside to outside.
view full answer... - How To Mount 7-Way Connector To Curt Trailer Hitch Receiver C15810I have another option for you, but there is not a no drill mounting bracket that has a longer clamp than the # C57202 you purchased. Instead I recommend the Curt Easy Mount Bracket # C58003 which will mount to the receiver tube of the Curt Trailer Hitch Receiver # C15810 you purchased and installed. I included a video of the 2" version of the # C58003 being installed for you to take a look at.
view full answer... - Will the Curt Trailer Hitch C15810 Fit a 2005 Ford F-350 With 18 Inch Spare Wheel/TireThe tech tip that you are referring to on the Curt Trailer Hitch Receiver part # C15810 for your 2005 Ford F-350 is in reference to the diameter of the wheel. Since you have an 18" diameter spare wheel under your truck then you will not have any issues installing this trailer hitch. In order to mount your 4 and 7-way trailer connector to the above trailer hitch you will need to use the Curt Easy Mount Bracket for Trailer Connectors part # C58003 or the Curt No-Drill Bracket for Trailer...
view full answer... - Hitch and Extension Recommendation for 2003 Ford F-350 for Allowing 32 inch Hitch ExtensionFor that length of extension we only have 2-1/2 inch hitch options as they are the only size that's going to have the strength for the stress extensions put on the hitch. You would need to upgrade your hitch to the 2-1/2 inch size with a hitch like the Curt part # C15810 and then go to an extension part # C45048.
view full answer... - Hitch Dimensions for Fitting Hitch to 2012 Ford F-450The width of your frame indicates that your 2012 Ford F-450 is most likely a cab and chassis model which has the frame width a few inches than a standard truck bed. But if you can measure the distance between the mounting holes on the frame of your truck from left to right and they are 34.31 inches this hitch # C15810 would fit and work well.
view full answer...
- Class V Trailer Hitch Options for a 2002 Ford F-250 Super Duty 4x4 LariatWe have numerous Class V hitch options for your 2002 Ford F-250 Super Duty. I have listed them below. Curt Trailer Hitch, # C15410 2 inch receiver Curt Trailer Hitch, # C15810 2-1/2 inch receiver Draw-Tite Trailer Hitch, # DT45508 2-1/2 inch receiver B&W Heavy-Duty Hitch, # BWHDRH25230 2 inch receiver Tork Lift Trailer Hitch, # TLF1002 2 inch receiver Tork Lift Trailer Hitch, # TLF1002-30 2-1/2 inch receiver I have included links to the instructions for the hitches below. You can also...
view full answer... - High Towing Capacity Trailer Hitch Recommendation for 2000 Ford F-350The highest capacity trailer hitch we offer for your 2000 Ford F-350 is the Curt hitch part # C15810 which has a 20,000 lb trailer weight capacity and 2,700 lb tongue weight capacity. The Super Titan part # 38124 that you mentioned fits truck frames that are approximately 34" - 34-1/2" wide at the rear of the truck which is common for cab and chassis trucks. Your truck would not have this frame setup.
view full answer... - What Vehicles Does Curt Class V Trailer Hitch # C15810 FitThe Curt Trailer Hitch Receiver, part # C15810, is a Class V hitch with a 2-2/3 inch receiver opening and is a confirmed fit for the following vehicles: 2015 - 2016 Ford F-250 Super Duty 2005 - 2014 Ford F-250 and F-350 Super Duty Pickups only 2015 - 2016 Ford F-350 Super Duty Pickups only 2008 - 2015 Ford F-450 Super Duty Pickups only 1999 - 2004 Ford F-250 and F-350 Super Duty Pickups with Standard or Step Bumper
view full answer... - Recommended Hitch and Hitch Extension Compatible with 2011 Ford F-350 and 7K TrailerIf you have a 2-1/2 inch opening in your factory hitch receiver on your 2011 Ford F-350, then you can use the Reese Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches # RP45292 along with a weight distribution system for your 8,000 lb capacity. If you have a 2 inch factory trailer hitch receiver opening, then there is another option. If you are right at the 7,000 lb trailer weight or under it, you can use the Brophy Hitch Extender with Step - 2" Hitches - 18" Long - 6-1/2"...
view full answer... - Replacement Hardware for Curt Trailer Hitch # C15810We offer replacement hardware for our hitches like the Curt # C15810 with the part # RHK.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Joshua S
Test Fit:
Nicholas E
Video Edited:
Andrew L
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Laura E.
7/10/2017
You are absolutely correct, Joshua. Spare tires larger than 20 inches will not be able to be stored in the original location underneath the vehicle.