bing tracking image
  1. Trailer Hitch
  2. Ford
  3. F-250 and F-350
  4. 1996
  5. B and W
FITS 1996 Ford F-250 and F-350
B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2"

B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2"

Item # BWHDRH25122
Our Price: $329.00
Trailer Hitch
Confirmed to Fit
1996 Ford F-250 and F-350

Pickup - Standard or Step Bumper

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
B and W trailer hitch for your 1996 Ford F-250 and F-350 are available from etrailer.com. Installation instructions and reviews for your Ford trailer hitch. Expert service, and great trailer hitch prices. etrailer.com carries a complete line of B and W products. Order your B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2" part number BWHDRH25122 online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (165)
  • Q & A (0)
  • Photos

1996 Ford F-250 and F-350 - B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2"

  • 2 Inch Hitch
  • Class V
  • 16000
  • Visible Cross Tube
  • B and W
  • 1600
  • 16000 lbs WD GTW
  • 1600 lbs WD TW
  • Custom Fit Hitch

This sturdy steel hitch from B&W is designed to fit your heavy-duty towing needs. Safety chain loops are built in and an electrical bracket is included for mounting your 7-way trailer connector (sold separately). Powder coat finish resists rust.


Features:

  • Custom-fit trailer hitch lets you tow a trailer with your vehicle
  • Bolt-on installation - no welding required
    • Interlocking, 3-piece design
    • Grade 8 mounting hardware and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • High-gloss, black powder coat finish resists corrosion
  • Safety chain loops built into heavy-duty steel gusset
  • Sturdy steel construction
  • Electrical bracket for 7-way trailer connector included
  • Ball mount, pin and clip sold separately
  • Made in the USA


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class V
    • Maximum gross trailer weight: 16,000 lbs
      • Maximum GTW when used with weight distribution: 16,000 lbs
    • Maximum tongue weight: 1,600 lbs
      • Maximum TW when used with weight distribution: 1,600 lbs
  • Lifetime limited warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



HDRH25122 B and W Heavy-Duty Class 5 Trailer Hitch Receiver

Installation Details BWHDRH25122 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
16,000 lbs.

Tongue Weight (TW):
1,600 lbs.


Weight Distribution Capacity
Gross Towing Weight (GTW):
16,000 lbs.

Tongue Weight (TW):
1,600 lbs.



Manufacturer Estimated Installation Time

Tech Tip

Hitch is designed to allow fits for both 34 and 37-1/2 inch frames. Drilling required for installation , Hitch installation is made easier by lowering or temporarily removing the spare tire , Spare tire repositioning and/or modification of spare tire carrier may be required




California residents: click here


Customer Satisfaction Score:


Customer Reviews

B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2" - BWHDRH25122

Average Customer Rating:  4.8 out of 5 stars   (165 Customer Reviews)

This sturdy steel hitch from B&W is designed to fit your heavy-duty towing needs. Safety chain loops are built in and an electrical bracket is included for mounting your 7-way trailer connector (sold separately). Powder coat finish resists rust.

by:

Two holes to drill, bolted right up. I did not open package for about six months after receipt. I was short two pieces of hardware. Contacted B&W, parts were in the mail that day. This is the second hitch I have ordered. No problems with either one!!



by:

Absolutely love the install process and the look of this hitch. I installed it on my 1989 V30 Crew Cab. Took all of 10 minutes.
My only complaint is how it arrived to my doorstep. Not sure if it’s how these things are shipped or if Shipping dropped the ball but it seems like an easy way to lose parts if you ask me. Only stating this in hopes Etrailer can make a note of it happening.



by:

Hitch worked out great for my project, 1966 ford f250 body on a 1976 ford f250 4x4 highboy frame/chassis. Drilled all new holes to mount to frame. I had concerns because I had to shorten the frame 2 inches to accommodate the 66 long bed and factor original bumper. Thank you for the photos and dimensions of drop for the receiver tube. Hitch looks great and doesn’t hang to low.



by:
1997 Ford F-250 and F-350 Heavy Duty

Had to trim the mounting ears about 3/16” of an inch on either side to clear bumper mounts. Seems very sturdy and well made. Looks good and doesn’t hang down too low on a 97 f250 with standard rear bumper.



by:
GMC

I am very impressed with this product. The construction on the class 5 hitch is something to brag about! Very well constructed and made. The welds and craftsmanship looks great. The only mods I had to do, the center holes on the frame were off about a 1/4 inch, it’s was no problem to drill out with the right tools. It is well worth the time to install, took me about and hour. This is why I’m always proud to buy products made in the USA [Thumbs up] The quality of the B&W hitch is unmatched. The process and shipment was fast as well.
1983 GMC K2500

Cal

12/6/2020

Works great ! Strong and durable



by:
1971 Ford F-100, F-150, F-250, F-350

Excellent heavy duty hitch. Fit perfect and was easy to install. Fast service.



by:

I’ve hauled lots of hay with mine no issues. Towed the cattle trailer a few times and it worked great. Highly recommend this hitch



by:
2016 Ford F-250 Super Duty

Excellent quality American made hitch, installation went very smoothly onto my 1973 F250 truck. I particularly liked the modular bolt together design of the hitch this made the installation go easier (since it was lighter and less awkward).

I installed inside, then put the back piece into the mounted side and then installed the second side.

The photos are not the best, but hitch tucks up nice and tight to the bumper. Since the capacity is 16,000 lbs, it will definitely handle the new 28' enclosed trailer with ease (close to 10,000 lbs loaded).



by:
1984 Chevrolet C/K Series Pickup

I ordered this hitch for my 84 Chevy D30 military truck. After a few modifications to the existing mounting brackets for the tow hooks and the rear bumper I installed the new hitch assembley. Make sure you loose install all bolts first before tightening. Tighten new hitch assembly last. One of the most difficult parts is getting the Pindel hitch bolts lined up. I would suggest a good tapered line up bar.



by:
1986 Chevrolet C/K Series Pickup

Great hitch, I didn’t even have to drill one hole in the frame on my 1988 GMC v3500, it bolted right in. The receiver tucked under the bumper very good
The only thing I didn’t like was the trailer wiring plug bracket because it didn’t accommodate the new style 7-way and 4-way plug that come on the new Chevy trucks



by:
1968 Ford F-100

Very good quality American made item. It fit my 1968 Ford F-100 perfect. It sits right below my new Fey step bumper and I can't even see it except for the square receiver hole.

Steve S.

5/12/2015

Used it 4 times last year to pull my 25 foot Airstream using an equalizer hitch. Still works great!



by:

Fit good on my 88 f250 install was pretty easy. Was worried about it sticking out to far where my truck has a roll pan on it but actually fits pretty good with the roll pan



by:

Awesome product! Just had to drill the center holes on both sides through the frame and it bolted right in. The tracking is by far the best of any online purchase I’ve ever made. Great job guys keep it up



by:

Awesome, delivered on scheduled and installed the same day with ease! High quality materials and easy to follow instructions. The license plate cut out was from the old hitch. The B&W trailer hitch was perfect fit no cutting necessary.



by:
1976 GMC C/K Series Pickup

Fit good as advertised



by:

It is a great reciver hitch. Bolted right up to my 1985 chevy k30. I tow all the time so a good strong hitch is important.



by:

Instructions sucked, but I figured it out. Works perfectly, thanks



by:

I couldn't find what i was looking for anywhere else and e trailer had exactly what i wwanted. I am extremely please with the customer service I received and the product. I will be using etrailer first from now on thank you etrailer.
Nick R.



by:

Hitch fit perfectly on my 1989 Dodge W150! Took less than an hour to install, only had to drill 2 holes to fasten it to the frame.



by:
1995 Ford F-350 Super Duty

worked perfect on a 95 f350 with a stock hight bumper.



by:

Very sturdy and looks great. I installed it myself laying on cardboard over my gravel driveway. It ws very tight with the drilling and all but if I, a 62 year old geezer can do it, so can you!



by:

Perfect fit on my chevy 3500 cab and chassis pickup. was missing a few washers but found some to finish install... fast shipping ordered on 3/16 received it 3/22



by:

I’m 100% satisfied. Dianna A knew exactly what I needed and what I was talking about when I was explaining my needs. The B&W hitch receiver is awesome.



by:
1985 Chevrolet C/K Series Pickup

I just got this hitch today in the mail, it's awesome! Extremely well built and sturdy and the etrailer box kept it safe no dings or dents even. On a regular Chevy truck it will fit perfectly and installation is very straightforward but I would recommend having a friend help hold it while you get two bolts started. I installed it on a 85 Chevy k30 m1008 military truck. On these trucks people have problems with the shackle mounts fitting with a hitch and this one is no different. Some modifications will be needed to the shackle mounts, or the shackle mounts can be removed.

Andy

4/18/2019

1 year later and this hitch is everything I said it was in the first review. The powder coating is still in great shape although this truck does not see Ohios lovely salted winter roads.



by:
1988 Ford F-250 Super Duty

This is a really nice, really heavy duty hitch. It also works with other brands of vehicles so if one wanted to could take it off before selling and reuse. (My truck is a 1988 F250) Installation was very straight forward, basically get a helper, hold hitch up to frame, mark bolt holes with pen or starter punch, and then drill consecutively larger holes till you get to 1/2 inch. Bolt up, torque, and you are off to the races. I did not remove the spare tire but wish I had. It made holding the top of the bolts very difficult. Save time and remove the spare tire as your first step.!

Etrailer Expert

Heather A.

8/22/2018

This hitch part # BWHDRH25122 is a custom fit for the 1988 F250. It it still a good idea to use the fit guide and make sure it will fit the next truck. It is not a custom fit for every vehicle.


25
165
Show More Reviews

See what our Experts say about this B and W Trailer Hitch

  • Recommended Trailer Hitch for 2006 Ford F-350 Cab and Chassis with Flat-Bed
    I may have an option for you but we don't have any confirmed fits for flat-bed applications as there are too many variances in the different flat-bed manufactures. That said, I can confirm what fits the frame and that's the B&W Heavy-Duty Trailer Hitch Receiver, part # BWHDRH25122 for a 6" drop or part # BWHDRH25198 for an 8" drop. If there is an overhang with the flat-bed you'll likely need a hitch extender like the Curt Hitch Extender for 2" Hitch Receivers part # C45791. I have attached...
    view full answer...
  • Wire Functions for Replacement Tail Lights for a 1976 Chevy C10 Pickup
    I do not know which lights you have but based on the colors you have provided it is likely that the white wire is ground, red is for turn signal/brake lights, and brown is for running lights. The wire functions also might be listed on the back of the light housing.
    view full answer...
  • Trailer Hitch for 1996 International 3800 School Bus
    Your best bet would be to use a universal application/service body hitch like # 41990-07 from Draw-Tite. The hitch has a 16K capacity and is a weld-on application that would offer plenty of capacity. Other customers of ours have used this hitch on school busses, and have found that they work great. The hitch fits frame members up to 44 inches apart, any excess tubing length can be removed if you wish.
    view full answer...
  • When Should the TorkLift SuperHitch Original Trailer Hitch Receiver Be Used on a 1987 Ford F-250
    If you plan to be installing a truck bed camper and you want to tow a trailer then yes, the TorkLift SuperHitch Original Trailer Hitch Receiver part # TLF1000 will absolutely be your best option. The reason for this is because it allows you to use a TorkLift SuperTruss Hitch Extension like part # TLE1542 which will most likely be needed for clearance because of the truck bed camper. In order to add a 7-way to your F-250 you will want to use the 7-Way Pre-Wired Pigtail part # 20024. This...
    view full answer...
  • Recommended Trailer Hitch With Extension For 1997 Ford F-250 With Camper And Boat Trailer
    Yes. The TorkLift SuperHitch is the only brand that accepts the custom fram mounted camper tie downs. For your 1997 Ford F-250, the hitch receiver you would need is the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers # TLF1000. You would not need to modify your exhaust or move your spare, you would only need to temporarily move for installation. The only 21 inch extension that will not reduce a hitch capacity by 50% is the TorkLift SuperTruss...
    view full answer...
  • Will B&W Heavy-Duty Trailer Hitch # BWHDRH25122 Fit 1977 Ford F-250 with 34 Inch Frame
    Yes, the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25122 referenced in your question will fit the 34 inch frame width on your 1977 Ford F-250. This was the common frame width on trucks during that time frame (along with most cab and chassis models of today) and this particular hitch fits that width perfectly. This heavy-duty Class V hitch features a 16,000 pound towing weight capacity and a 1,600 pound tongue weight limit. I have attached a sample install video that you can check...
    view full answer...
  • Will Reese Hitch 37042 Fit a 1998 Chevrolet C/K Series Pickup
    The Reese hitch 37042 that you referenced is discontinued and was a fit for the first generation Ford Escape. We do offer hitches for your 1998 Chevrolet C/K Series Pickup that can be seen on the link provided. You can use the Select Vehicle Style drop-down menu at the top of the page to select the truck version you have. If you are uncertain of the type of bumper you have you can refer to the linked article for illustration. For instance, if you have a roll pan bumper you can install...
    view full answer...
  • Bolt Spacing Dimensions B and W Hitch for 2001 Ford Cab and Chassis Truck
    I called my contact at B&W and she gave me the following measurements of their Class V Trailer Hitch # BWHDRH25122. From the rear bolt hole to the middle bolt hole is 11-3.8 inches. From the middle bolt hole to the front bolt hole is 5-15/16 inches. The overall measurement is right at 17 inches. If you have to fit around an air bag kit this might be your best option.
    view full answer...
    Image 1 for
  • Availability of a Class IV or V Trailer Hitch to Fit 1975 Chevrolet Blazer
    I do have a solution for you. However, the Draw-Tite Class III hitch # 75129 is the only confirmed hitch that will fit a 1975 Chevrolet Blazer. There are no custom-fit Class IV or V hitches for this model vehicle. The Curt Class V Universal Weld-On Receiver Hitch, # 15901, may be an option for your 1975 Blazer. The bracket can fit a frame that has a minimum width of 18 inches to a maximum of 44 inches. The mount brackets are welded to the frame. The side brackets will also provide a drop...
    view full answer...
  • USA Made Trailer Hitch Recommendation for 2008 Chrysler Town and Country
    We have really great trailer hitch options for your 2008 Chrysler Town and Country like the etrailer # e98854 which is our best fitting and highest capacity option for your vehicle but B and W only makes hitches for larger trucks at this time and they do not have an option for your vehicle. The etrailer hitch is made in the USA though like B and W hitches. For trailer wiring the easiest to install and most reliable option is the part # 118552 which is a custom fit option as well. We...
    view full answer...
  • Class V Trailer Hitch for 1972 Ford F250 with Barden Bumper
    I am unfamiliar with the Barden Bumper and in my research, I could not find any specific information regarding the Barden Bumper. Our trailer hitches are not tested with aftermarket bumpers. We have two bumpers that have been determined to be a fit for your truck with a factory bumper. The # BWHDRH25122 is for standard and step bumpers and the # BWHDRH25198 is for deep drop bumpers. I recommend measuring from your frame to the bottom of your bumper to know how much distance you will need...
    view full answer...
    Image 1 for
  • Recommended Weight Distribution Hitch Compatible Class 5 Trailer Hitch Receiver on 1984 Chevy C10
    I recommend the B&W Trailer Hitch Receiver # BWHDRH25122 for your 1984 Chevy C10. With a weight distribution hitch it really comes down to the weight of the trailer. You will want to select a hitch which falls in the amount of tongue weight range of the hitch but also does not exceed the maximum trailer load rating. Personally the Equal-i-zer systems are my go to thanks to their great quality and functionality that other manufacturers strive to compete with. 200-600lbs Tongue Weight,...
    view full answer...
  • Highest Rated Trailer Hitch for 1984 Chevy K10 Short Bed with Step Bumper
    We do have trailer hitches available for your 1984 Chevy K10, however the B&W Class V Trailer Hitch Receiver # BWHDRH25122 that you referenced is only a fit for the long bed model of your truck and will not fit your short bed K10. The highest rated hitch we have available for your Chevy K10 with the short bed and factory step bumper is the Curt Class IV # C14082. The hitch will work perfectly as long as your truck has a 34 inch frame width (from outside to outside). This custom hitch...
    view full answer...
  • Trailer Hitch and Wiring for 1970 Ford F-250
    The B and W Trailer hitch part # BWHDRH25122 that you referenced is the correct hitch for your 1970 Ford F-250 with a standard bumper and comes with everything needed to install. For trailer wiring you are going to need to start with a 4-way like part # 18252. If this is the style of connector you need you'd be done at this point. If you need a 7-way you'll need to go further than this. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to...
    view full answer...
  • Will B&W Trailer Hitch Fit with Dual Fuel Tanks on a 1992 Ford F-150
    Hey Robert, thanks for reaching out! You shouldn't have any issues fitting the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25122 on your 1992 Ford F-150, but since we haven't performed this installation yet, I recommend checking out the linked video of this hitch on a 1988 F-250 so you can compare it to what you have. We don't have insight into what the dual tank system looks like on your truck, and while it may not be necessary to remove your spare tire for the installation, it will...
    view full answer...
  • Recommended Trailer Hitch for 1988 Chevrolet Suburban
    The B&W Heavy-Duty Trailer Hitch Receiver, part # BWHDRH25122 is designed to only fit Chevrolet C/K Series Pickups and is not a fit for your 88 Suburban, but I do have a hitch that will work for you. I recommend the Draw-Tite Trailer Hitch, part # 75500. This is a Class lll hitch and it has a 2 inch receiver opening.
    view full answer...
  • Will a Hitch for 1996 Ford F-350 Also Fit 1987 Chevrolet K20 Pickup
    It would be quite unusual - and really lucky - for a hitch that fits a 1996 Ford truck to also fit a 1987 Chevy pickup. There are currently a wide range of hitches offered for both vehicles. These fit the various versions of the two trucks. There are 17 hitches offered for the different versions of the 1996 F-350 depending on its bumper type and bed length. Please see the included link. There are 20 for the 1987 K-Series, shown on the other link. If you can tell me the bumper type and...
    view full answer...
  • Class V Trailer Hitch for 1971 Ford F-100 Pickup with Standard Rear Bumper
    B & W offers a 2-inch trailer hitch for your 1971 Ford F-100 pickup with standard rear bumper. However, to install this hitch more easily, it will be required to lower and temporarily remove the spare tire. It can be re-installed, but it may require that the spare tire be repositioned and/or modified. Part # BWHDRH25122 is rated for 1600-lbs of tongue weight and 16000-lbs of towing capacity. Installation instructions for this hitch are attached, along with an installation video on a newer...
    view full answer...
  • Hitch Recommendation to Fit Frame Width of 34 inches
    Since you have a standard cab and chassis frame dimension on your shuttle bus we have the B and W Hitch part # BWHDRH25122 which will have mounting brackets that are spaced properly. It drops a bit more than 2 inches though. It's actually 5 inches down but should still work well. You'll probably have to drill the frame of your vehicle to get the hitch to bolt up though.
    view full answer...
  • Trailer Hitch for a 1998 Fleetwood Pace Arrow to Tow a 6,000 Pound Trailer
    You are going to need to have a hitch welded to the frame of your 1998 Fleetwood Pace Arrow motor home by a qualified professional welder. The bolt-on hitches we have for RVs are not rated high enough for a gross trailer weight of 6,000 pounds. I have included a link to the right to the weld-on truck hitches that we carry. You will also need to check the owners manual for the RV to make sure it is rated high enough for 6,000 pounds gross trailer weight.
    view full answer...
  • Mounting Hole Dimensions for B&W Heavy-Duty Trailer Hitch Receiver, part # BWHDRH25122
    The # BWHDRH25122 has 35-5/8 inches between mounting holes like what you see in the picture I attached. Since you need larger than than let me know what vehicle you have and I can see which would be best fit.
    view full answer...
    Image 1 for
  • Is Bolt Pattern between B and W Hitches BWHDRH25122 and BWHDRH25198 the Same
    Since the only difference between the B and W Hitches # BWHDRH25122 and # BWHDRH25198 is the style of bumper they fit with the bolt pattern is the exact same. Only difference is the height difference relative to the hitch opening and where it mounts to truck frame.
    view full answer...
  • Are Trailer Hitches Certified and Documented for Weight Capacity
    Trailer hitches and vehicles often have different ratings. The trailer hitch, # BWHDRH25122, itself is rated for 16,000 pounds gross trailer weight and 1,600 pounds tongue weight. But if the truck is rated lower, which it likely is, then you have to go by the lower rating. The truck owners manual should state what its towing capacity is. The trailer hitch meets the specifications for trailer hitches required by the Society of Automotive Engineers (SAE) and the US department of transportation....
    view full answer...
  • Can I Install Trailer Hitch Upside Down on 1972 Dodge Full Size Pickup
    We have several trailer hitches that are a confirmed fit for your 1972 Dodge Full Size Pickup. I have included a link to all of the trailer hitches that are a confirmed fit. The B & W trailer hitch, part # BWHDRH25122, is the only hitch that does not require drilling for installation. I spoke with my contact at B & W and he said they do not recommend their hitches be installed upside down because they are not designed and tested that way. An adjustable ball mount, like # RP21141, could...
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Jared G
Test Fit:
Jared G
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video by:
Andrew K
Employee Lindsey S
Written by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Chris R
Video Edited:
Chris R
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Jenny M
Updated by:
Jenny M
Employee Kristina F
Updated by:
Kristina F
Employee Manda E
Updated by:
Manda E

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.