To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded Ford Crown Victoria trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Drilling required for installation , Models with dual exhaust require exhaust modification , An extra long drawbar is recommended
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (23 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.Turned my 2010 CVPI into a real workhorse. Prolly towed more than I should have a few times and everything is holding strong.
So my biggest complaint is how the product was handled and arrived. It was definitely not handled properly and banged up. I realize being in the manufacturing industry that this is not a result of etrailer, so I’m not upset with them whatsoever. As for the product it needed a little persuasion in order to fit my 2006 Ford Crown Victoria. The product overall is good quality and did fit my car, but required a little adjustment and tweaking in order to bolt right up. I chose this option because I didn’t want to make my own trailer hitch. I just want others to know that if you’re not an experienced person with fabrication skills this installation could be challenging. The hitch is installed, looks good and works well. I probably would have given a higher rating if it wasn’t for the condition that the product arrived on my doorstep. I will definitely use etrailer again… their customer service is top notch.
Fit perfectly on a 2001 mercury grand marquis Worked great had to drill two holes. Wasn't bad at all I've used it quite a bit since then with no trouble
Pretty happy, perfect fit for my 2010 Crown Vic and the best price I could find. Also received it lightning fast. Installed it myself, had to drill only two 1/2" holes in the rear of the frame (it uses two already present frame holes in front). Did not have to do anything with the tail pipes or their mounts (I have two pipes, it is PI model). The hitch does not touch the bumper cover in any way. Also the wire tool to insert the bolts into the frame was included.
Installation was as easy as i could imagine. This hitch is very heavy duty.The car most likely wont tow the amount of weight needed to break this hitch. The only thing that i dislike is that it is so high that the bumper rests on it. Not a huge problem but just something that i noticed. . Overall i am very happy with the hitch, Great quality and easy installation. Etrailer shipped fast and before i knew it my hitch was at my door.
I installed this by myself in about 40 minutes. I only had to drill 2 Holes in my frame to match The Holes in the hitch. It fit perfect. The lead wire for the bolt made it really easy. NO fighting to get The bolts and washers in place. I would do this again.
Trailer hitch was delivered damaged. Mounting brackets were severely bent. Customer service recommended bending them back myself!?!?!? How about NOT shipping damaged items to people?
Sierra K.
9/3/2021
I understand how frustrating it must be to receive a product that needs a little tweaking. We do sometimes reship highly flexed items but I fear that the next hitch may arrive slightly flexed as well. They are made to flex in case of an accident. Here is a help article explaining more tips on how to fix this:
Helpful Links
Purchased for a 2010 Crown Vic. no issues with installation.
Excellent purchasing experience through etrailer. Plenty of information online and any questions can be answered by their knowledgeable staff.
Will definitely recommend to others.
Thanks
the product is grate sturdy construction but its not just bolt on you have to drill the holes in the frame so if your not an expert mechanic like myself you will have to pay someone to mount it for you. but it is the same one thy mount on trucks so very sturdy unit the wire harness plugs right in no problem but you will have to cut off the head and replace it or drill a bigger hole
the hitch head you will have to use upside down because thy send you the step down instead of the step up
This worked out so well for my 2010 Mercury Grand Marquis. It took about 1.5 to 2 hours to install myself. It would have gone quicker with another set of hands. I put the car on four jack stands all the way around. (If you are going to wire in a light kit, this is a great time to run a hot wire from the battery.)
I used my floor jack to take the weight of the hitch so I could mark the rear holes. The front holes were already there and the "fish wire" was really nifty. I used brand new drill bits (1/8", 3/16" and finally 1/2") some WD-40 and a cordless 18v drill.
MAKE SURE TO WEAR SAFETY GLASSES!!!!
I was on my back, drilling straight up. I had my glasses on and got a ton of shavings in my hair and all over my face and neck, not fun. I imagine it would be worse without glasses.
That said, the hitch works great. I got it for a bike rack and to tow a utility trailer. A class III hitch is a bit of overkill for that application; however, I would rather have a little too much than a little to little.
The online videos were a great help. Just take your time, drink plenty of water and have a few Lemonheads.
The hitch fit up great. I do wish they had added a second fishing spring though, as the 1st 2 bolts went in pretty easy, but then I couldn't get the spring off the second two very easily. Also was not thrilled with the shipping box. It was ripped completely in half and taped back together also the anchor pcs inside were ripped away also. Resulting in many paint scratches and dents in the steel. I was impressed with the great fit up though. Did not have to move any pipe hangers either, my Crown Victoria is a P71 Police Interceptor.
Shopped around and found the best deal and instruction videos on etrailer! I ordered it Feb 13th (Tuesday), received and email confirmation saying your had has been received and will be delivered on Feb 16th (Monday). Next morning Wednesday morning I receive a tracking number and says it will be delivered Feb 15th! And it was! Quick service!! Very happy with the hitch, thank you etrailer
You promised it would arrive on Friday or Saturday but it came on Thursday which was even better. Instructions for installation were clear and we installed it in 30 minutes today (Friday) Thank you Susan for the great service. All the parts were there. Now the hitch is on and we can go trailering.
Installation was great, once I had two holes drilled it was much easier than expected. The whole apparatus is custom fitted yet very forgiving for a first timer. And customer service is great as well. I received a link to a detailed tracking history, which is a nice touch. Highly recommend if you're looking to tow with your 2008 Crown Victoria as well.
Installation was a breeze, and only took about 45-60 minutes. Seamless fit, and the receiver is very sturdy. The order processing and shipping was extremely fast, and the customer service was great!
it has been great and was easy to insta ll
Iv'e ordered multiple times from etrailer, and as before fast service. I don't even shop for prices anymore. Plus the videos are very helpful.
Thanks etrailer.
Just what I expected, excellent quality and excellent service
Drilled two holes tightened it up. Done. I did not have to move tail pipes on my 97 Mercury Grand Marquis.
Great Product, third one I have purchased, all went on well with no problems.
Just what I needed!
Already Installed . Great Product Great Price Fast Shipping
Happy Happy
Products and service that I received was Great!!
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Richard
8/16/2023
Works great 2001 mercury grand marquis towed a trailer from ca to NC did surprising well its full size hitch