Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
(96 reviews)
Price: $178.91
In Stock
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Item # 36642
Retail:$286.36
Our Price: $178.91
You Save: $107.45
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (96)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 36642
- Class II
- 1-1/4 Inch Hitch
- 3500 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 350 lbs TW
- Custom Fit Hitch
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Drawbar, pin and clip sold separately
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class II
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 350 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
36642 Draw-Tite Class 2 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2020 - 2024 Chevrolet Equinox
- 2018 - 2019 Chevrolet Equinox excluding Diesel
- 2021 - 2024 GMC Terrain
- 2018 - 2020 GMC Terrain excluding Diesel
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36642
Average Customer Rating: 4.7 out of 5 stars (96 Customer Reviews)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.by: John 03/20/2024
etrailer ROCKS! They have great products at an even better price, a super website and fast shipping. I purchased my previous hitch from them and knew not to bother looking anywhere else. Being a visual learner I LOVE their video tutorials. The hitch and wiring harness were easy to install, though it always seems to take me longer than their estimate given I am not using air tools, etc.
by: Stuart 01/21/2023
Hitch was a perfect fit and just right for my little boat trailer. Very satisfied with it.
by: Chuck 02/12/2024
The hitch works as I had hoped, My bike rack fits well.
by: Darren04/05/2024
2022 Chevrolet Equinox
Shipping was fast, product fitup great, but it looked used or slid around during or before shipping. Powder coating flaked off, and weld beads were very poor.
by: Jesse10/06/2022
2022 GMC Terrain
Very easy to order on website. Fast shipping stop. And I like the videos that give you a ideal of installing the hitch. I was very happy to see that the hitch fit perfect with clearance for the touchless hatch operation.
by: Bob08/06/2018
2018 GMC Terrain
Why doesn't the tube extend the 2" or 3". You have to use the extender to use a simple bike rack
Heather A.
8/7/2018
The design of the draw-tite hitch part 36642 is a bit recessed under the vehicle. An extender will cut your tongue weight capacity by 50 percent. If you do not want to cut your tongue weight the best solution is to get a bike rack with a longer shank. The Thule hitching post pro is designed with 13-1/2 inches from the center of the hitch pin hole and the closest part of the carrier. This will give you enough clearance to use it on your GMC Terrain without an extender.
by: Camron09/01/2020
The video with step-by-step instructions worked out perfectly with no hiccups everything was as described in the description before purchase and installing the hitch and wiring harness was very easy and done in a timely manner highly recommended!
by: Thomas02/16/2018
GMC
After reading instructions and watching the video it took about 1hour to install the hitch and trailer hitch
It was the easiest trailer hitch and wireing kit I have used
installed on a 2018 GMC Terrain
by: Dennis07/27/2018
2018 Chevrolet Equinox
The shipping was very prompt,,the product is of a very good quality and installed very easily. I was/am very satisfied and would recommend this to anyone considering a trailer hitch.
by: Tim 06/15/2023
The Draw-Tite hitch installation went just like the video. Very happy that there were no surprises.
TM
by: Steve02/09/2023
The hitch was very dusty like it's been in warehouse a long time and in a beat up semi open box. I was worried it was damaged but lucky it was not. It had all bolts and parts. It seems like over kill on a heavy hitch for a class II hitch.
by: Leland07/17/2021
2021 Chevrolet Equinox
Installation was exactly as shown on the instruction video. SWEEET!
by: Ricardo06/03/2019
Excellent product, 5 stars seller
Watch YouTube video for installation.
Will buy again
by: Richard08/17/2019
2019 Chevrolet Equinox
My hitch arrived within a few days of placing order. Was very easy to install. Watched a very good YouTube video on the install. This is on a 2019 Equinox. The hitch is a bit lower than the one I had on a 2017 Equinox, but works with my bicycle rack fine.
Richard
8/18/2020
My hitch is used primarily to hold my bicycle rack and is working fine after one year
by: Bill P04/14/2019
2018 Chevrolet Equinox
I ordered and installed the 1 1/4 inch trailer hitch on my 2018 Equnox mainly to tow my 16 ft. Bass boat. I did this because I have had several cars in the past and have always used a 1 1/4 inch hitch and have never had any trouble. All of my inserts are 1 1/4 inch. Now I am reading all the specs for the hitch I installed and find that it is barely heavy enough to fit my towing needs. For the same price I could have installed a 2 inch hitch and not had the light towing restrictions. My only option is to purchase and install the heavier hitch and try to resell my present one.
by: Billy03/06/2022
The tow package arrived in a timely manner and in good condition. Installation went well thanks to the videos the company provided. The only issue I had was that the muffler rattled against the hitch no matter what I did. I rechecked my installation and followed suggestions from the retailer. I ended up using a universal muffler hanger that allowed me to lower the exhaust 1/2". This solved the problem, and the hitch has performed well over the last year and still looks great. I have bought from this company before and will buy from them again in the future.
by: David 03/10/2020
Trailer hitch was just what I needed. This is the second hitch purchased from etrailer. The first one I installed. This one I had a mechanic install as I had health issues. It works well with my bike rack. The kit was complete and easy to install. Best done with a helper to hold it in place while you get the bolts started.
by: David 02/22/2023
The complete order was timely and as expected. Very good experience as I have always had with E trailer purchases.
by: Sandra03/06/2021
I bought this hitch for a new vehicle to use with a bike rack I already owned. I bought that from you, also. When the hitch was delivered I called because the box was open. Someone stayed on the line with me while I checked to make sure nothing was missing. Great service. When my friends asked where I got my bike rack and hitch, I always tell them trailer.
by: G. McMinn12/21/2022
The hitch is used on a fleet of cars for use as an attachment for a bicycle rack.
by: Thomas 04/21/2021
Hitch was so easy to Install with the detailed instructions I got. I did it myself- with no helper! After using it for a 2-bike rack about 30 times in the past year, it’s still doing great. I use the long bolt instead of the cotter/linchpin and I have no rattle or excel movement. Very satisfied with this purchase.
by: Joe B05/19/2020
2018 Chevrolet Equinox
This is a very solid trailer hitch. It fit my 2018 Equinox perfectly and it was easy to install. It only took about 45 minutes to do the complete job and its hidden profile easily keeps the receiver away from obstructions. After one year, it's still in prime condition.
by: TDWM08/15/2022
Almost all hitch receivers were damaged/bent and required straightening in order to fit on the vehicles, which took a lot of time and effort to make them usable.
by: Jim 10/05/2017
2018 Chevrolet Equinox
The hitch is very solid and easy to install. It fits quite well and much of it is concealed so it looks good too. Shipping was very fast and the service at etrailer has always been good. My only issue is it was very scratched and there was peeling paint on arrival (I uploaded one picture showing some of the scratching). It wasn't due to shipping but packaged that way. I had to buy some spray paint and paint it myself because there was a fair amount of bare metal showing that I didn't want rusting. On the underside of the hitch there was also a lot of slag from welding. Not a huge deal but it shows that not a lot of care was taken when it was welded. I'm sure the hitch will work just fine but I'd be a lot happier if it hadn't arrived all scratched up and have welding slag all over the bottom of it.
by: Frank 06/16/2023
We the hitch also every weekend. It works great.
25
96
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- What Vehicles Do The Draw-Tite Trailer Hitch Receiver # 36642 Fit? The Draw-Tite Trailer Hitch Receiver # 36642 fits the following vehicles. 2020 - 2024 Chevrolet Equinox 2018 - 2019 Chevrolet Equinox excluding Diesel 2021 - 2024 GMC Terrain 2018 - 2020 GMC Terrain excluding Diesel
view full answer... - Replacement Hardware for Draw-Tite Trailer Hitch Receiver For 2018 Chevrolet EquinoxI have great news, we offer a complete replacement hardware kit for the Draw-Tite Trailer Hitch Receiver part # 36642. In order to obtain this you will need to order Replacement Hardware Kit for Trailer Hitches part # RHK. For the manufacturer drop down you'll need to enter "Draw-Tite" and then for the hitch item number you'll need to enter "36642".
view full answer... - 2 inch Trailer Hitch Recommendation for 2018 GMC Terrain without DrillingThe 2 inch hitches we offer for your 2018 GMC Terrain don't require any drilling to install. The Draw Tite part # 76419 is a great fit for your vehicle if you have the gas engine. If instead you have a diesel engine you'd want the part # 76217. Both require no frame drilling but the diesel engine version does require some fascia trimming that's not noticeable. I attached a picture that shows the trimmed area.
view full answer...
- What's The Inside Diameter Of The Replacement Nylon Cap For Greaseless Hardball AM3664-2I went out and measured all of our stock of the Replacement Nylon Cap # AM3664-2 and all of them measure 1.755". It sounds like your ball will just need to be completely replaced, but as there's a few that use this cap just send me a picture of what you have and I can find you a complete replacement.
view full answer... - How to Replace the Cap on an Andersen Greaseless HardBall Hitch BallI went out to the warehouse and pulled greaseless ball to see how exactly the nylon cap is held on. It is not glued on or held on with a fastener. It is pressed on the ball. When it comes time to replace the cap, you would use some channel locks or large vise grips and pull off the old cap and then press on the new one. It is understandably difficult to remove the cap on a brand new ball. After enough wear and tear it would come off a little easier.
view full answer... - Will Trailer Hitch from 2017 Chevy Equinox Fit 2019 EquinoxWe have hitches for the 2019 Chevrolet Equinox but the # 36408 Draw -Tite is not a fit because there's a generation change after 2017. Instead, if you want to keep a 1-1/4 inch receiver the only option is part # 36642 If you'd rather upgrade the hitch size to the 2 inch receiver I recommend the Draw-Tite # 76419 which has a concealed crosstube so all you see is the receiver opening under the bumper. That's it in the picture I attached. Be aware neither of these hitches are confirmed to...
view full answer...
- Recommended Class II Hitch for a 2023 GMC TerrainThe best hitch for your 2023 GMC Terrain is going to be the Draw-Tite Trailer Hitch item # 36642. This hitch is custom fit and bolts to your GMC with included hardware. This is a class II hitch with a 1-1/4" receiver. It has a 3,500 lbs towing capacity, and a 300 lbs maximum tongue weight. I have linked a couple of pictures below along with an installation video so you can see what this hitch looks like when installed. If you are planning on towing you will also need the Draw-Tite Drawbar...
view full answer...
- Curt or Draw-Tite Class II Trailer Hitch for 2020 GMC TerrainBetween the Curt Trailer Hitch Receiver # C98CR and Draw-Tite Trailer Hitch Receiver # 36642 that fit your 2020 GMC Terrain, I would go with the Curt Trailer Hitch Receiver # C98CR These are very similar hitches, but the deciding factor here is that the Curt does have the significantly higher tongue weight capacity, 525 lbs vs. 350 lbs for the Draw-Tite. While this may not come into play often, it certainly can make a difference if you need to carry heavier cargo on a cargo carrier, for...
view full answer... - Is There a 1-1/4" Hitch for a 2020 Chevrolet EquinoxThere is a 1-1/4" Class II receiver that fits on the 2020 Chevy Equinox with the Draw-Tite # 36642. This hitch has the 1-1/4 receiver that you're looking for. If you're going to be towing anything with your Equinox you may need a few other items to complete your towing setup. If you don't already have a wiring harness for a 4 way trailer connection, you'll want to use the Tekonsha T-one # 118750 (for models excluding the Premier), which tees into your vehicle's electrical system with...
view full answer...
- Replacement Nylon Cap for 2 inch Greaseless HardBall Hitch Ball The part number you are looking for is the # AM3664-2 which is the replacement nylon cap for the Greaseless Hardball Hitch Ball in the 2 inch size.
view full answer... - Trailer Hitch and Wiring for a 2018 GMC Terrain 1.5 LiterDraw-Tite trailer hitch # 36642 is a fit for your 2018 GMC Terrain. But I recommend the Class III hitch # 76419 because it is a more stout hitch and the 2 inch receiver is compatible with many hitch accessories. For the Class III hitch, if you plan on doing some towing, I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin...
view full answer... - Replacement Cap for 2" Greaseless HardballThe part you are looking for is the Replacement Nylon Cap for Greaseless HardBall Hitch Ball with 2" Diameter part # AM3664-2
view full answer... - Replacement 2 Inch Nylon Cap for Greaseless HardBallYes, the replacement cap for the Rapid Greaseless Alumiball Combo part # AM3436 you have on your Rapid Hitch Adjustable Aluminum Ball Mount part # AM3411 is the Replacement Nylon Cap for Greaseless HardBall Hitch Ball with 2" Diameter part # AM3664-2.
view full answer... - Hitch Height of Draw-Tite Trailer Hitch When Installed on a 2018 Chevy EquinoxWhen we installed the Draw-Tite Trailer Hitch Receiver # 36642 on a 2018 Chevy Equinox we found that from the ground to the top inside of the hitch receiver measured 11". Since you are looking to use a cargo carrier I recommend using the 2" hitch receiver # 76419 instead because it gives you a lot more options when it comes to using a cargo carrier. The ground clearance for this was 10-7/8" when we installed it on a 2018 Equinox. These are your best options for ground clearance with a trailer...
view full answer...
- Is the Andersen Greaseless Ball Cap Compatible with a Regular Hitch Ball?The Replacement Nylon Cap for Greaseless HardBall Hitch Ball with 2" Diameter # AM3664-2 is not a fit for a regular 2 inch ball. There is not a Greaseless ball that measures 2 inch diameter with a 1-1/4 inch shank. My recommendation is to use the 2" Hitch Ball # A-90 and then use White Grease Hitch Ball Lube # 58117 to reduce friction and noise. Your option to get that greaseless ball is only in a ball mount like the Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Greaseless Balls...
view full answer... - Replacement Nylon Ball Cap for Greaseless Rapid Hitch 2-5/16 Ball AM3435Both Replacement Caps for Rapid Hitch greaseless hitch balls like the # AM3435, parts # AM3664-2 and # AM3664-2516, are rated to match their respective hitch ball sizes. Since the nylon cap does not really bear the towed weight load (the shank does that) the caps are to be selected just based on ball size. Part # AM3664-2516 fits the 2-5/16-inch ball and part # AM3664-2 fits the 2-inch.
view full answer... - Replacement Rubber Tops for Rapid Hitch Double HitchYes, we have the replacement nylon covers for the Rapid Hitch with the part # AM3664-2516 for the 2-5/16 inch ball and part # AM3664-2 for the 2 inch balls.
view full answer... - Availability of Replacement Nylon Caps For Rapid Hitch Ball Mount, # AM3405The replacement nylon caps for the greaseless Rapid Hitch balls are available separately. They do not come in a kit. The Replacement 2 Inch Nylon Cap, part # AM3664-2, is the 2 inch size cap and the Replacement 2-5/16 Inch Nylon Cap, part # AM3664-2516, is the 2-5/16 inch cap. I am including the links to both part numbers.
view full answer... - Is Replacement Nylon Cap For Greaseless HardBall Hitch A Universal FitThe Replacement nylon caps we offer come in three sizes for different sized Andersen Greaseless HardBall. If you have a 1-7/8 inch hitch ball you would use part # AM3664-178. For a 2 inch ball you can use part # AM3664-2, and for a 2-5/16 inch ball you would need part # AM3664-2516.
view full answer... - Recommended Trailer Hitch Receiver Compatible with 2018 Chevy EquinoxThe trailer hitch for your 2014 Chevy Equinox, will fit models from 2005 through 2017. 2018 models had a different frame, so I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76419 or the 1-1/4 inch # 36642 which is a confirmed fit for the 2018 model year. For your wiring, I recommend # C94FR if you get the tow package or # 118750 if you don't have the tow package. I've linked some videos to assist. If you get the 1-1/4 inch receiver, you will...
view full answer... - Replacement Nylon Caps for Andersen Greaseless Hardball Hitch BallsThe 2 inch and 2-5/16 inch greaseless balls require different replacement caps. The 2-5/16 inch version is # AM3664-2516. The 2 inch is # AM3664-2. And the 1-7/8 inch is # AM3664-178.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video by:
Kathleen M
Video by:
Jonathan Y
Video by:
Aidan B
Video by:
Thomas T
Updated by:
Wilson B
Updated by:
Isabelle B
Written by:
Alexander C
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Jacob H
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Stuart
1/21/2024
Still working perfectly. No issues.