Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
(229 reviews)
Price: $175.24
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Retail:$313.85
Our Price: $175.24
You Save: $138.61
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (229)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch
- Class II
- 1-1/4 Inch Hitch
- 3500 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 300 lbs TW
- Custom Fit Hitch
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers a-coat base for superior rust protection
- Sturdy, square-tube design
- Drawbar and pin and clip sold separately
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class II
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 300 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
36540 Draw-Tite Class 2 Trailer Hitch Receiver
90031 Hidden Hitch Class 2 Trailer Hitch Receiver
Replaces 36514
Item # 36540
Installation Details
This Product Fits The Following Vehicles
- 2013 - 2018 Toyota Avalon
- 2012 - 2017 Toyota Camry
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.
Tongue Weight (TW):
300 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Gross Towing Weight (GTW):
3,500 lbs.
Tongue Weight (TW):
300 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Tech Tip
Drilling required for installation , Exhaust must be temporarily lowered for installation , Minor heat shield modification may be required , Trimming or removal of underbody panel required for installation
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Alternate product found
Customer Reviews
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36540
Average Customer Rating: 4.8 out of 5 stars (229 Customer Reviews)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.by: Austin08/12/2021
2012 Toyota Camry
While the hitch appears to be built very solidly, I am disappointed in the quality of the powder coated finish. The product was received with multiple chips in the powder coating. Also, the weight label was applied crooked resulting in a very sloppy appearance. Now, instead of installing my hitch today, I have to research the best way to protect the exposed metal. It's unreasonable to have to repair a product straight out of the box.
by: Ned 02/14/2023
Toyota Camry
Rugged. Exactly what I wanted. CLear instructions on YouTube on installation. Went perfectly. Use it all the time on my Camry.
Ned
2/15/2024
Still love the Draw-Tite hitch. Is perfect and we use it all the time to tranport our bikes wtih a Kuat rack. WOrks perfectly.
by: Christian 04/24/2024
Great price, excellent videos to help with the installation.
by: Spencer12/19/2023
My hitch was easy to install. Everything fit as expected. And my trailer follows me wherever I go. The electronics installed per the instructions without a hitch. (No pun intended.)What more could I ask for?
by: Valentino03/09/2024
Perfect fit for my 2014 Camry. Very happy with my purchase. I took to my local body shop and only took them less than 3 hours to install. Very sturdy and doesn’t stick out. Looks clean.
by: James V04/14/2017
2017 Toyota Camry
I got a new 2017 Camry and an avid cyclist. Before getting the hitch, I would have to take apart my wheels just to fit it in the trunk. This got old and annoying really quick. I found the Draw-tite trailer receiver hitch on etrailer.com. I made sure it would fit and got it. I had my local mechanic shop install it watching the video vs the manual, because that was confusing. It fit perfectly flushed and clean. I put a hitch mounted bike rack and now my life is that much happier!
James V.
4/17/2018
I love how convenient it is for hauling my bikes. It definitely beats having a roof rack.
by: iggibar09/09/2022
Very glad I ordered this hitch. Installation was a little complicated due to my 2018 Avalon Limited's exhaust setup and little rust getting in the way. The hitch itself has been phenomenal in every way. What I love the most is that it's SUPER flush with the lower bumper. I hate other hitches that extend too low past the bumper! It's strong, and never once did I question its integrity. I have 2 mountain bikes that I carry on it, and it's been fantastic. I will definitely purchase another one for my other cars.
by: Alvin07/17/2021
2014 Toyota Camry
The hitch came with chipped powder coat out of the box. Not from shipping because it was already rusted. etrailer reimbursed me xx dollars to purchase a bottle of spray paint and do it myself...
Just a bit disappointed. I paid for a new hitch not one that can potentially rust more in the future. This is the 2nd hitch for a 2nd vehicle within the year -first one was flawless.
The hitch itself fit well. Bumper gap was a bit larger than I like. Bike rack bottomed out on a not so steep driveway my lowered 2004 wrx had no issues with
Sierra K.
7/21/2021
Thank you for your review. I apologize about the chips in your product. I am glad Customer Service addressed it. If you would like to raise your bike rack to avoid bottoming out, take a look at product # 3593.
by: Joshua10/28/2021
2013 Toyota Camry
The trailer hitch appears to be of good quality. I'm giving this 2 stars because, my Trailer Hitch arrived scuffed up, there is paint missing and scuffed up. Now I have to find some paint and buff out the damage and paint it before installing it or it's gonna rust right away when winter comes and the salt contacts it. Not impressed.
Jenny N.
10/29/2021
I will have our customer service team reach out to you. I would suggest touching up the hitch with a rust resistant paint that you will have on hand for regular hitch maintenance.
Helpful Links
by: Brenton08/14/2021
2014 Toyota Camry
Great hitch and my 2014 Camry SE did not require any trimming. I installed this myself with ease. I used a jack and a piece of 2x4 and the hitch balanced perfectly on the wood and I was able to maneuver it into position without a problem. Shipping was great. One trick, leave the fish wire on until after you get the hitch up to the car to ensure the bolt doesn’t go up into the frame rail. Everything took less than 2 hours and was very simple.
by: Mark W.06/30/2012
2012 Toyota Camry
etrailer delivered everything quickly and the instructions were very good. Installed this on my 2012 Camry to carry a bike rack only, so this hitch was perfect since it doesn't include a ball mount or ball. Figuring out how to drill the one inch holes in each frame rail was the hardest part - there are not a lot of metal bits that big available - my solution was to use a Harbor Freight #96275 step drill. All in all a great experience with etrailer.
by: L.d.07/18/2018
2012 Toyota Camry
I bought a trailer hitch and wiring harness for a 2104 Camry. The delivery was fast and efficient. The hitch and wiring was as advertised and installed as the etrailer videos portrayed. The bottom trim panel did not need as much adjustment or cutting as expected. Only had to cut out a piece 2 inch wide by 12 inch long and the panel fit nicely.
Was easy to install. Took approximately 4 hours total due to not having a lift
to raise the car to a better working height.
I have bought previously from etrailer and always a pleasant experience.
by: Maria05/16/2018
2014 Toyota Camry
I am a 52 year old female 5 feet tall and 120 lbs and I installed this product on my 2014 Camry SE V6 with dual exhaust and I did it alone with the help of a 1/2 ton jack and some ramps. I used the jack to hold the exhaust and then to raise it back up to refasten it. This was so easy to do and I couldn’t be happier. I also installed the wiring to lights and ran it through the inside of vehicle and then through the firewall. Great product.
by: Wilfredo08/19/2022
So I installed this by myself except needed a pair of hands when lifting to screw the bolts. I used the your video and written instructions to do install. Instructions said it would take 1 hr. I took approx 3 hrs. Jack up car, prep, tools, and clean up metal shavings. Once installed it’s solid.
by: Comfort 4 Life07/07/2015
2014 Toyota Camry
I just got my hitch installed on my 2014 Camry and it fits & looks perfect.
I also bought the Yakima Bike Rack and it fits the hitch perfectly.
Erika was very helpful and my items arrived in 3 days...
A M A Z I N G!!!
by: Patrick03/02/2013
Installation process was just as described! Buy a step bit; it makes drilling the holes for the carriage bolts easy. Pictures show lowered exhaust by 1/2" and use with Kuat Beta
by: Dale05/23/2020
Hitch was well designed.
I appreciared the installatiob videos. Thanks!
I used a floor jack to raise the hitch (balanced) into place, after drilling appropriate holes.
I used Camry jack to raise the car.
Wiring system works fine after installation.
by: Wolfgang 01/17/2024
Great product - holds up well through all kinds of weather. bikes fit great@!
by: Eric10/03/2020
2015 Toyota Camry
Overall this was a easy process. Great price and quick shipping. Videos on etrailer were very helpful. My only complaint is the stickers on the hitch. The weight label was poorly applied and really sticks out.
by: David10/08/2020
Installation was easy. Lucky for me on my 2012 Camry SE no trimming of any panel was necessary as the stock one that came on my camry only covered the spare tire compartment. I am the original owner so I can confirm this is the way it came.
by: Michael06/11/2018
2016 Toyota Camry
Very fast shipping thanks. The video helped out a lot for the install. Only problem was the box was damaged and the hitch was sticking through the box. The hitch was missing a little paint. Hope it doesn't rust. Hopefully etralier can secure the hitch in the packaging a little better in the future.
by: Clay G06/28/2019
2012 Toyota Camry
Got this yesterday and put it on today myself with the help of the tutorial video specific for my vehicle. It is exactly what I need and for a fraction of the $300 the trailer rental place quoted me. Looks great too, thanks!
by: William 06/13/2023
Good product. Toughest part of installation was drilling the 2 big holes. No modifications were required.
by: Adam 06/15/2023
The hardware works exactly as described. No doubt I would order from them again thank you!
by: Colby 04/04/2023
2012 Toyota Camry
The installation of the hitch went very smoothly with the help of the videos included on the site (don’t expect much clear direction with the included instructions in the box). Fit up was extremely nice and the overall quality of the hitch exceeded my expectations.
25
229
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Do Holes have to be Drilled in 2014 Toyota Camry if Trailer Hitch is Just for a Bike RackI cannot recommend installing Draw-Tite trailer hitch # 36540 on your 2014 Toyota Camry in any other way other than what is specified in the instructions. If you do it will void the hitch warranty and actually makes the capacity unknown (since it isn't tested in that manner). You also have to consider stability of the hitch. Without all of the fasteners the hitch could move and flex more than it is supposed to and that could damage the hitch and vehicle. The instructions state that a 1...
view full answer... - How Far Apart Should the Bolt Holes to Mount a Hitch on a 2013 Toyota Camry BeYour best bet is going to be to confirm the part number on the spec sticker of the hitch; the Draw-Tite # 36540 and Curt # C12107 are the confirmed hitches we offer for your 2013 Toyota Camry. The distance between the bolt holes on these hitches are all different depending on their positions but they are: 38" apart center on center for holes closest to engine 38-1/4" apart center on center for holes closest to bumper 37-1/4" apart center on center for the middle holes I've also linked...
view full answer...
- Trailer Hitch Option for 2014 Toyota Camry for Bike RackTrailer hitches with 2 inch openings are typically only available for vehicles that have higher towing capacities like trucks and SUVs. For lighter duty vehicles like your 2014 Toyota Camry there are only 1-1/4 inch hitches like the Draw Tite part # 36540. Your best solution would be a new bike rack like the Hollywood Racks RV Rider # HR200Z but there are also hitch adapters like # HTAD you could use as well but these cut the capacity of the hitch they are used in by 50 percent.
view full answer... - Hitch Recommendation for a 2014 Toyota CamryBoth the Draw-Tite Hitches # 36540 and # 36514 will fit your 2014 Toyota Camry whether it is a hybrid or not. The two part numbers are the same hitch. Either would work well for you since they both will fit your vehicle. If you go with the # 36514 because you want the ball mount and the pin and clip you may also be interested in purchasing a 1-7/8 inch hitch ball part # 19256. I attached an install video for you to check out also.
view full answer... - Trailer Hitch Receiver Installation On 2017 Toyota AvalonThe Curt Trailer Hitch Receiver Class II - 1-1/4" # C12107 or the Draw-Tite # 36540 will fit the same way on your 2017 Toyota Avalon. You can either cut a hole for the hitch in the underbody panel or you can leave it off, but there isn't a trailer hitch receiver option that will allow you to leave the underbody panel on without trimming.
view full answer... - Will Draw-Tite Trailer Hitch # 36540 Fit a 2012 Toyota Camry SE and Can the Car be Used for TowingFirst, if the owners manual states that you cannot tow with the vehicle, then I cannot recommend going against that. If the owners manual is unclear, you will need to contact your Toyota dealer or Toyota directly to determine if the car can be used for towing and, if so, what the capacity is. The Draw-Tite trailer hitch, # 36540, is listed as a fit for all models of the 2012 Toyota Camry, including the SE. It also fits hybrid models. I have included a link to the installation instructions...
view full answer... - Recommended Trailer Hitch and Adapter for 2013 Toyota CamryThe trailer hitches that are available for your 2013 Toyota Camry are Class II hitches with 1-1/4 inch receiver openings. This is most likely because the Camry simply does not have the towing or tongue weight capacity that a higher rated trailer hitch (and larger receiver opening) will provide. I recommend installing the Draw-Tite Class II Frame Receiver Hitch # 36540 over the Curt model that is also confirmed to fit your vehicle. This is because unlike Curt, Draw-Tite does not require...
view full answer... - Recumbent Trike Carrier Recommendation for a 2014 Toyota AvalonWe have a solution for you. The Hollywood Racks Trike Carrier part # HR1000Z-R-TRKADP will carry a recumbent trike and can fit the Class II hitches like what are available for your 2014 Toyota Avalon. For a hitch you then would want the Draw Tite part # 36540 which is a confirmed fit. Carrying a bike rack is different from towing a trailer so you might check with Toyota to see if they recommend carrying a bike rack.
view full answer... - Recommended Trailer Hitch For A 2012 Toyota Camry For Holding A Cargo CarrierThough I am not familiar with the ECOTRIC brand as it is not one that we carry, it does look to need a hitch to be able to install on your 2012 Toyota Camry. With that said, we do have a few hitch options available for your car and the Curt # C12107 is a good one. This is American made and I included an install video for you to check out. However, this, as well as the Draw-Tite # 36540, are Class II hitches which means they have a 1-1/4" receiver. This is due to your 2012 Camry having...
view full answer... - What is Towing Capacity of 2014 Toyota Camry V6I looked up the towing capacity of your 2014 Toyota Camry with a V6 and it can tow up to 1,225 lbs so as long as the Tracker boat and trailer weighs less than that you'd be fine. You'll need a few things to complete your towing setup. First you'll need a hitch and for that I recommend the Draw Tite part # 36540 as it has plenty of towing capacity and has the shortest install time of the options available. I attached an install video as well. Then for trailer wiring the best option is...
view full answer...
- Bike Rack for a 2014 Toyota Avalon with Draw-Tite Class II Trailer HitchYou can certainly use a bike rack in your Draw-Tite trailer hitch # 36540 on your 2014 Toyota Avalon. Just make sure that it is compatible with a 1-1/4 inch trailer hitch. If you need a bike rack I recommend the Swagman XTC-2, # S64670. This is a platform style carrier that will prevent the bikes from touching. I have included a link to a video review of this carrier for you.
view full answer... - Is Swagman XTC2 Bike Rack Good Option for 2017 Toyota Camry and 2006 Toyota CorollaThe Swagman XTC3 part # S64670 that you referenced is a very popular bike rack because of how well it fits a variety of vehicles like your 2006 Toyota Corolla and 2017 Toyota Camry but also because it's a really great bike rack at a very reasonable price tag. My dad has had this bike rack for about 8 years now and he still really likes it. I attached a review video for this rack for you to check out as well. You will need to have a hitch installed on both vehicles to allow the rack to...
view full answer... - What Type of Trailer Hitch Fits 2014 Toyota AvalonFor your 2014 Toyota Avalon we have Class II trailer hitches with 1-1/4 inch openings like the part # 36540 as a confirmed fit which would work great. I attached an install video for this for you to check out as well.
view full answer... - Hitch Recommendations For 2014 Toyota Camry HybridFor your 2014 Toyota Camry Hybrid, I recommend the Draw-Tite Trailer Hitch, part # 36540. This is a Class ll hitch and has a 1-1/4 inch receiver opening. This hitch is a bolt-on installation and requires no welding. You will want to check your owner's manual or with your dealership to see if your Camry is capable of towing, and if so what the towing and tongue weight capacity is for your vehicle. If your Camry is capable of towing, I recommend a ball mount like part # 36071. For hitch...
view full answer... - What Vehicles Does the Draw Tite Hitch 36514/36540 FitThe Draw Tite hitch part number 36514 that you referenced has been replaced by the # 36540 and fits the 2012-2015 Toyota Camry non-hybrid 4 doors and the 2013-2015 Toyota Avalon non-hybrids. Both numbers fit the same vehicles.
view full answer... - Why Is There Hitch for 2015 Toyota Camry If it is Not Rated for TowingWe can verify that the Draw Tite hitch part # 36540 that fits your 2015 Toyota Camry has the towing capacities of 3,500 lb trailer weight and 350 lb tongue weight but as far as the vehicle you'd have to go with what a Toyota dealer or your manual states. We do have quite a few hitches for vehicles that technically are not rated for towing and how that happens is that if there's a demand for a hitch to be made for a vehicle our manufacturers will make it as there are plenty of people who...
view full answer... - Best Bike Rack for a Trek Marlin 6 Mountain BikeI would be happy to help you find a hitch and a bike carrier for your daughter's 2015 Toyota Camry. I would recommend the Draw-Tite Trailer Hitch Receiver item # 36540 you referenced. This hitch is custom fit and bolts directly to your Camry with included hardware. I have linked an installation video below. The Swagman Trailhead 2 Bike Rack for 1-1/4" and 2" Hitches item # S63360 you were looking at would be a great option for your Trek Marlin 6 mountain bike but you would need the Swagman...
view full answer... - Recommended Bike Rack for Fat Tire Bikes on 2014 Toyota CamryThe Thule OutWay 2-Bike Platform Rack - Trunk Mount - Adjustable Arms # TH65JV is not compatible with your 4 inch wide fat tires. There is not currently an adapter to make it compatible. Because your Salsa Bucksaw full suspension bike has a carbon fiber frame, I recommend adding a trailer hitch receiver like # 36540 and then adding a platform bike rack that mounts to the wheels. I've attached a video of the installation of the Draw-Tite trailer hitch to assist. Then for your bike...
view full answer... - Trailer Hitch and Cargo Carrier Recommendation for 2017 Toyota CamryFor a hitch for your 2017 Toyota Camry you would want the Draw Tite hitch part # 36540 which is a confirmed fit. I like this hitch over the Curt for you as it does not require the stabilizer strap when carrying a cargo carrier like you said you were interested in doing. The most popular hitch cargo carrier to use that is a confirmed fit then would be the part # 63155 which is 20 inches by 47 inches and fits 1-1/4 inch hitches like this.
view full answer... - Best Way to Carry 4 Bikes with 2012 Toyota CamryThe best way to transport bikes is with a hitch mounted bike rack. This is the safest and most secure solution that is also the easiest to load. So first you need a hitch on your 2012 Toyota Camry like the Draw Tite part # 36540. Then for a 4 bike rack the Yakima Ridgeback part # Y02458 would be a really great option. It has cushioned frame cradles, can tilt and is overall a really high quality rack that's easy to use. If you plan on carrying any womens or alternative framed bikes without...
view full answer... - Trailer Hitch and Bike Rack Recommendations for a 2013 Toyota AvalonI will be happy to get you set up for a hitch and bike rack. For the 2013 Toyota Avalon, all of the available hitches, see link, are Class II hitches. The most popular hitch is currently Draw-Tite, # 36540. This hitch will not fit a hybrid model Avalon. I have incldued a link to the installation instructions. For a bike rack, the Swagman XTC2, # S64670, is one of the most popular platform style bike racks available. It would be a good choice for the vehicle, especially if you are looking...
view full answer... - Trailer Hitch Recommendation for 2016 Chevy Malibu HybridDraw-Tite trailer hitch # 36540 will fit the 2016 Toyota Camry Hybrid. I have included a link to a video in which we install the hitch on a 2016 Toyota Camry Hybrid. The Curt hitch has not been test fit on a Hybrid model at this time (January 2017).
view full answer... - Recommended Trailer Hitch for Bike Rack on 2016 Toyota Avalon HybridThere is a hitch that will fit your 2016 Toyota Avalon Hybrid, the Draw-Tite # 36540, which is a Class II hitch with a 1-1/4" receiver; I checked with Draw-TIte to confirm this. Keep in mind you will need a bike rack which fits in a 1-1/4" receiver and is Class II compatible such as the Kuat Transfer # KU74FR. I've added a link to our selection of our bike racks that have a 1-1/4" shank for you to check out or if you let me what type of rack you are looking for I'd be happy to make a recommendation...
view full answer... - Recommended Ball Mount for Draw-Tite Class II Hitch 36540 on 2012 Toyota CamryWhen installed on your 2012 Camry, the receiver of the Draw-Tite # 36540 isn't recessed very far under the vehicle so the Draw-Tite # 36071 ball mount will work perfectly in the rise position. The hitch pin is also included. For a trailer ball, use # 19256 for a 1-7/8 or # 19258 for a 2 inch trailer ball. For a trailer wiring harness, I'd recommend the # 118405 from Tekonsha. To see install videos for the # 36071 hitch and the wiring harness I recommended, click the provided links.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Laura H
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Ryan G
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sierra K.
8/18/2021
I am so sorry about the damage to your hitch. Customer Service will be reaching out to you as soon as possible.