Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Average Customer Rating: 4.5 out of 5 stars (22 Customer Reviews)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.Using primarily for a bike rack. Install is straight forward. An older (2012-16) Subaru Impreza sedan install video is out there on Utube. On the 2022 model, the frame hole for wire feed does not require enlargement, it all fits fine! Get a set of extra hands for raising the hitch to the frame mount bolts. I didn't have help or a suitable jack, so it was a very fiddly situation. I was able to thread a cpl bolts with just the nut to start and get the hitch in place for fastening. You want to be careful to not push fed bolts back up in the vehicle frame :) No major towing happens on a Subaru Imprezza sedan, but this will work great for a bike rack and cargo shelf. Trunk is accessible once the bike rack is mounted. A+++.
We received the trailer hitch which is a birthday gift for my son in law in a timely fashion. It was delivered when the company predicted. Also,an inquiry about the delivery was answered promptly and courteously. I will be able to further review the trailer hitch after my son in law uses it.
Just installed as a two person job. Took about 2 and half hours as we ran into some trouble removing the exhaust. Other wise easy to install and good directions and helpful video. Have not tested with Nike rack or trailer in it yet
Perfect fit and a easy install 20-30 min with basic hand tools . Instructions included with the package and if you need more info the website is a good place to get it . They also have amazing customer support .
Everything went perfect, installation video was extremely helpful. I couldn’t believe it took under an hour to install without any problems. We cannot wait for bike rack to come so we can use it.
Very easy to install especially with the video by etrailer. Shipped the same day as ordered. All around great experience.
Installed on 2020 Subaru Impreza sedan. Having experience working on cars all my life, it took me about 20 min by myself. If your a novice, get yourself an extra hand to help hold it in place "it's not as light as it looks trying to hold in place with one hand and installing nuts and bolts with the other while lying on your back reaching for sockets." Also, give yourself a little extra time. As far as quality; I've had other hitches on other cars that were crap. I recommend either a Draw-Tite or Reese.
did not install , way to much reciever for that make of car. would have only cleared the ground by a few inches.
Sierra K.
8/16/2021
I would not be too worried about installing this hitch on your vehicle. It sits 9.5 inches from level ground to the top of your receiver opening on your Impreza.
Good hitch but had to buy a hitch extention to attach a two bike rack because the inside bike was too close to the trunk.No one informed me of this problem.
Secure, sleek, and perfectly set for my bike rack.
I've been using this to mount my bike rack for the past year. Installation was simple, about an hour total. It's been reliable with no signs of loosening or damage. Excellent!
Pretty straight forward installation…video of the installation was a big help. Getting ready to put the bike rack in our new hitch and head to the trailhead…super stoked!
The hitch to that I purchased For my daughters car fit perfectly I highly recommend this product from this company E trailer
Easiest process to order. Delivery was very quick! I’ll take picture after Christmas as it’s a present
Just put it on tonight. Fits well.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
5/2/2019
Keep in mind that using the adapter shown in the photo will lower the hitch capacity by half. This means that the weight of the bikes plus the rack theyre carried upon cannot be more than 50 of the hitchs rated tongue weight capacity, which would be 100 lbs in this case.