Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
(242 reviews)
Price: $239.17
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
Item # 14001
Retail:$386.95
Our Price: $239.17
You Save: $147.78
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (242)
- Q & A (0)
- Photos
2001 Dodge Ram Pickup - Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Class IV
- 2 Inch Hitch
- 10000
- Concealed Cross Tube
- 1000
- CURT
- 1200 lbs WD TW
- 12000 lbs WD GTW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Dodge 's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class IV
- Maximum gross trailer weight: 10,000 lbs
- Maximum GTW when used with weight distribution: 12,000 lbs
- Maximum tongue weight: 1,000 lbs
- Maximum TW when used with weight distribution: 1,200 lbs
- Maximum gross trailer weight: 10,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
14001 Curt Class 4 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
12,000 lbs.
Tongue Weight (TW):
1,200 lbs.
Gross Towing Weight (GTW):
10,000 lbs.
Tongue Weight (TW):
1,000 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
12,000 lbs.
Tongue Weight (TW):
1,200 lbs.
Tech Tip
Bumper may need to be loosened and repositioned upward. Spare tire may need to be repositioned. Drilling required for installation , Does not fit models with rollpan bumper , Does not fit Cab and Chassis or vehicles with 34 inch frame
Complete Towing Package for 2001 Dodge
Retail:$489.90
Package Price:$347.59
2001 Dodge Ram Pickup Owners Who Purchased This Trailer Hitch Also Bought...
Popular Trailer Hitch Accessories
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 14001
Average Customer Rating: 4.8 out of 5 stars (242 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Eric02/24/2023
The packaging was solid and so was the fast delivery. Good fit only a couple of modifications to miss one of the factory rivets. Pushed to one side Against the leave spring bracket the hole used to miss the rivet fell in line with the rolled ninty of the hitch. A grinder and cutoff wheel did the trick. I would have to drop my gas tank down out of the way if I want to through bolt the rest of the hitch plate. The edge of the tank is in line and next to the frame. I'm thinking on drilling and taping and using some lock tight and call it good. It was fairly easy to install once you tie one end up and then hold the other end and mark your holes with a sharper. Through bolt the side you just drilled and then repeat. Very well fabricated I would recommend this style of hitch to anyone.
by: Ben02/15/2020
1973 Ford F-100, F-150, F-250, F-350
Installed on a 1973 Ford F-250 with 37-3/4" frame. Installation was straight forward. Product fit well. I put the second hole on the last riveted frame cross member, everything lined up perfectly. Make sure to allow enough room for the washers on top of the frame rail, I had to use a die grinder to open up one hole because I made the hole too close to the frame and could not get the washer to sit on the frame rail. A second person and C - Clamps helped a lot. We lifted the receiver into position, clamped it in place. I drilled one hole on each side, installed the bolts, then removed the clamps and drilled/installed the rest of the hardware. Contrary to the instructions, I did not have to remove my spare tire (thank Jesus!).
Great product, shipped fast. This is my third Curt hitch and one of many times I've used etrailer.
by: Tony07/05/2021
1993 Ford Bronco
This hitch appears very well make and was fairly easy to install on my Bronco. Even at 70 I had no issues and it took about an hour at a slow pace. First thing I did was wire it to a floor jack and jack it in place to mark the holes, step drilled as recommended and fished the bolts through as is necessary on the Bronco due to the fuel tank position. I didn't see any Bronco install pic here so here are a couple of pics. Very similar to the F150 type install except for the fuel tank.
Tony
7/6/2022
Still secure and working exceptionally well.
by: Dean 05/12/2024
Product arrived earlier than expected and install instructions were perfect. Great. Alue
by: Michael L10/16/2023
This hitch was the perfect replacement for my truck, Great product and service ,the price was very fair. I received my new hitch and had it back on the truck in a day, would recommend etrailer to everyone and will use again if needed in the future.....
by: Noe 03/16/2024
1999 Dodge Ram Pickup
Fits perfect on my 1999 Dodge Ram 1500 and easy to install.
by: Michael 09/18/2023
Installed Curt hitch class 4 2” and after a year here in Mn still has a gloss finish on black paint. Well made and installed fairly easily and had all hardware required.
by: Ron11/27/2018
Ram 3500
I'm 75 years old and not getting around like I used to. The Curt class IV hitch aligned perfectly with frame existing holes. Center hole needed to be drilled, easy enough to do. The existing 3500 lb.bumper hitch was removed. Some wiring was attached to frame and needed to be relocated. My son stopped by to help with installation, but we found a floor jack could be used to position hitch without need for extra muscle. Once lifted, we used clamps to hold in place for hole enlargement and drilling. Looks like it will tow much more than truck is certified to pull
by: William Mayhew 10/11/2019
The product was an easy install just as they said. The wiring was also simple to install. It works perfectly and also increases the value of my truck because it’s equipped to haul trailers or campers with an taillight / brake lights hook up.
I was very impressed with this and will definitely contact etrailer again if I need anything else.
by: Scot05/02/2020
1977 Ford F-100, F-150, F-250, F-350
Fit my 1977 Ford F250 Super Cab Camper Special with step bumper. The guide holes fit right over the rivets on the frame rails. Leaves adequate room for my spare tire to continue to be carried by the undermount system. Just what I was looking for. Still mulling over where and how to place my trailer wiring receptacle. Might put a six-pin round in the left license plate light hole.
by: Cameron07/24/2021
Product quality is exactly like every other Curt part, no problems. Packaging and shipping from etrailer was lacking. Albeit quick, but the product was outside the box on my doorstep. Hitches get beat up and rusty over time so not worth complaining, but still a bit disappointing.
by: timothy02/02/2021
It was indeed a perfect match to my F-350's rear end. It tows large trailers well, and as of last month, survived a rear-end colission "without a hitch," pardon the pun. It is still perfectly straight. Good product!
by: George B.06/05/2012
1980 Ford F-150
I ordered the Curt Trailer Hitch Receiver on the Memorial Day weekend and it was delivered on Friday, the same week. I found the Curt Trailer Hitch Receiver fit my 1980 Ford F150 Pickup without any problems. Other places I checked did not have Trailer Hitch Receivers for vehicles this old. It took a little over an hour to install. The extra time was needed to drill six 1/2" holes in the bottom flange of my truck frame.
by: Derek10/25/2023
Fitment wasnt perfect it was a little narrow for my frame but still bolted up and has hauled good, no problems, was put in a 1995 f150 4.9 rwd 5 speed single cab long bed
by: Mr. Bill03/05/2017
1990 Ford F-150, F-250, F-350
The hitch arrived in 3 days in great condition. Good packaging. My installation took a little longer than most I am sure. My bumper mounts have a "C" shaped cross section that covered the areas on both sides of the frame where toe rear most bolts needed to be installed. Had to remove the bumper.
I have purchased several items from ETrailer over the years. All have been high quality and the prices can't be beat.
I will always dream with etrailer when I need towing components.
by: Richard 06/08/2024
1987 Ford F-150, F-250, F-350
Great service and quick shipping.
by: Kevin08/10/2021
2nd curt hitch I've installed, had it done in 35 minutes. Didn't have to move the spare or rear bumper. Really easy install. Good shopping by etrailer too.
by: Scott02/25/2022
awesome hitch,super easy install,great price.have worked great for towing my car trailer.curt hitchs are the best.
Scott E.
2/26/2023
this hitch is still awesome.would recommend to anyone who needs a quailty hitch.
by: William 11/30/2021
item looks great . It will be quite some time before I will be able to get it installed .First off the truck has a home made hitch welded on it now . I will have to get it off first . My shop is working outside and with winter coming it will take time . I'll try and send you some pictures of the one I have to cut off , And in time send you one with it installed on truck .
Regards
William
12/1/2022
Dont know yet . I have had a few health issues last year . The hitch looks great and in my mind Im sure it will work as it should . Number one is the person that owned the 1985 Ford F350 dually had someone weld a make shift hitch on it , and I will have to grind it off to put this nice hitch on .
by: Deidre04/15/2021
1996 Dodge Ram Pickup
I am Soo happy with how easy this hitch receiver was to install. Everything fit perfectly and was well packaged.
by: Luke03/23/2023
The box was delivered split in half and the hitch hanging out of it. Paint damaged, scratched and missing hardware.
Jenny N.
3/24/2023
Wow, it certainly did not make to you undamaged. I will have our Customer Service team contact you so that it can be replaced.
by: Cesar F. 10/13/2017
Dodge Durango
Arrived on time. Perfect fit. No issues. Will definitely order from you guys again.
Cesar F.
10/18/2018
Works great
by: Henry 09/02/2020
2015 Dodge Ram Pickup
The hitch receiver was beautifully finished in gloss black, well made and bolted precisely to my 1994 Dodge Ram 1500. Each of the six bolts enclosed with the receiver, when inserted in the holes in my truck's frame made the receiver absolutely, perfectly aligned. You can be proud of the welds and metal were solid and smooth professional fabrication. Install time took me 1 hour. I spent 15 minutes of the hour balancing the receiver on my floor jack and chaining it to the jack, since I was doing the job by myself. I got the bolts finger tight then applied my 1/2 inch impact wrench with a 3/4 inch socket to finish the job. I would buy this again.
Henry H.
9/6/2021
The hitch continues to meet all my original expectations!
by: Troy06/06/2022
Good quality hitch. Fits as it should. Sits low on my lowered truck but does the job.
by: Seth M.06/03/2015
This is the second CURT mfg. class 4 hitch that I've purchased from etrailer.com; each for two different trucks. The website is easy to navigate, the product arrived on time in a sensibly packaged box, and most of all they are made in the USA - which is something I take seriously. No room for improvement here, I'll be back for other items.
Seth M.
6/18/2016
All is well with the second hitch, Ive used it numerous times with no issues. The first one was on an older truck that I sold. Thank you again for selling American made products.
25
242
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Will The TorkLift Frame-Mounted Camper Tie-Downs Fit On My Ford F-250Yes. The TorkLift Custom Frame-Mounted Camper Tie-Downs # TLR3500 is confirmed for the 1997 Ford F-150 and F-250 Light Duty 8 Foot Bed - without board or step underneath truck bed and with a non-Torklift aftermarket hitch. The TorkLift tie-downs are designed to be mounted to your frame for better weight distribution and to lower the center of gravity. Here is a link to our turnbuckles as you will need these if you do not have some already.
view full answer... - Recommended Front Mounted Trailer Hitch For A 1984 Ford F-150For your 1984 Ford F-150 I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41990-07. This universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44" with 7" tall, weld-on mounting brackets included. It has a maximum gross trailer weight capacity of 16,000lbs and maximum tongue weight capacity of 1,600lbs. There is not a confirmed fitting front mounted hitch for your vehicle and a rear mounted trailer hitch...
view full answer... - Recommended Hitch for a 1995 Ford F-150All available hitches for a 1995 Ford F-150 require drilling to install. Thank you for the information but I am sorry there are no other options. The Curt Trailer Hitch item # 14001 you were looking at is a great hitch. It fits the 1995 F-150's that have a standard or step bumper. This hitch is made in the USA and has a 10,000 lbs towing capacity that can be increased to 12,000 lbs when used with a weight distribution system. I have linked an installation video below. If your truck...
view full answer... - Recommended Trailer Hitch for 2002 Dodge Ram 1500 PickupWe do have a Class lll trailer hitch that will fit your 2002 Ram. I recommend the Draw-Tite Max Frame Hitch, part # 75135. This hitch has a 2-inch receiver opening. No drilling is required for installation. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and...
view full answer... - Receiver Hitch Recommendation for 1993 Ford F150The Curt Class IV Trailer Hitch Receiver, # 14001, is just one of the hitch receivers that has been specially designed to fit a 1993 Ford F150 with a standard or step bumper. This fully welded trailer hitch receiver bolts onto the F150's frame with no welding required. I am including a link to all of the hitches that we have available for a 1993 Ford F-150. Just select your bumper style and you will see a list of the hitches that are available for your truck. Each of those listed will...
view full answer... - Trailer Hitch Recommendation for 2001 Dodge Ram 1500 to Tow 4,700 lb Travel TrailerI would install a hitch on your 2001 Dodge Ram 1500 like the Curt # 14001 which has more than enough weight capacity, installs easily, and would be much better than towing with a bumper ball. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If...
view full answer... - High Capacity Trailer Hitch for a 1995 Ford F-150 XLT with Regular Step BumperThe 2 Curt hitches you referenced are not a fit for a 1995 Ford F-150. Hitch # C15845 is for Super/Heavy duty cab and chassis models, not regular pickups, and # C15810 is for F-250 and F-350 models. For your F-150 with the regular step bumper you can use Curt hitch # C15300 or # 14001. I have linked some videos showing how these hitches install.
view full answer... - Does the Curt Multi-Fit Hitch C13900 Fit a 1992 Ford F-150I have a solution for you, but the Curt Multi-Fit Hitch # C13900 is not a confirmed fit on your 1992 F-150. If you have a standard bumper on your F-150 you can use the Curt # 14001 and if you've got a deep-drop bumper you'll want to use the Curt # C13099. Both of these hitches will require drilling into the frame of the vehicle during installation, but that is going to be required with all of the hitches that are confirmed on your vehicle.
view full answer... - Recommended Trailer Hitch for 1993 Ford F-150The Curt Class IV Receiver Hitch # 14001 referenced in your question is indeed confirmed to fit your 1993 Ford F-150 Pickup if it has a standard or step bumper. I spoke with my contact at Curt and he stated that the 1993 Ford F-150 did not have a model with a factory tube bumper. I recommend verifying the type of bumper that is on your truck to ensure that this will work. If it is an aftermarket item, then this particular hitch is not confirmed to fit. Keep in mind that some drilling...
view full answer...
- Does Curt Hitch # 14001 Fit 1996 Ford F-150 XLYes, the Curt hitch part # 14001 is a confirmed fit for your 1996 Ford F-150 XL that has a 37 inch outside to outside trailer frame.
view full answer... - Class III Hitch Receiver Recommendation for 1987 Ford F-150 with 37-1/4 Inch FrameI do have a Class III hitch that fits your 1987 Ford F-150 with a 37-1/4 inch frame, however, it's not a Curt. Take a look at the Draw-Tite Max-Frame Trailer Hitch Receiver Class III # 75038. This hitch receiver has a towing capacity of 5,000 lbs and a tongue weight rating of 500 lbs, which is more in line with the towing capacity of your F-150. It also features a concealed crosstube design, just like the Curt # 14001. That being said, Draw-Tite hitches are not manufactured in the USA. If...
view full answer... - Replacement Parts for Hitch on1992 Ford F-150We sell complete hardware replacement kits for any hitch, part # RHK. You simply input your hitch number and select the manufacturer of the hitch and we will ship the exact kit for your hitch. Note: We strongly recommend using the hardware provided by the manufacturer to ensure the safety and reliability of the product, and to keep the tow ratings valid.
view full answer... - Does Same Curt Class IV Hitch Fit 1991 and 1994 Dodge RamThe Curt Class IV hitch part # 14001 does fit your 1994 Dodge Ram 1500. It also does fit a 1991 too since it's the same design! I attached an install video for this hitch on a 1995 Dodge Ram which would be more similar to what you have.
view full answer... - Trailer Hitch Recommendation for 1989 Ford F-250For your 1989 Ford F-250 the Curt hitch part # 14001 is a confirmed fit and would work well for towing a trailer. You will need to start with a 4-way (if you do not have one). For that you would want the # C55316. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire...
view full answer... - Will the Draw Tite Hitch # 41004 fit a 1992 F-Super Duty/F450 W/LiftgateI do not have a confirmed fit for your 1992 Ford F450 with the Eagle Lift liftgate, but I spoke to my contact at Draw Tite and he informed me of a way for you to determine by taking a few measurements on your vehicle. He said that from the rear most mounting hole to the end of the receiver tube is 10-7/8 inches. So if you can find that hole and then measure out 10-7/8 inches and that distance is not too far for your lift gate to still work you should be good. My contact did say that most...
view full answer... - Installing Curt Class IV Receiver Hitch # 14001 on 1995 Ford Bronco with 3 Inch LiftIf the lift kit does not interfere with or obstruct the bottom of the frame members where the hitch attaches to the vehicle, the fact that your Bronco is lifted should in no way affect the hitch installation. Due to the lift, you will need to choose a ball mount that places the trailer ball at the correct height so that your trailer is level when towed. I will link you to our ball mount FAQ article that shows how to measure for the correct rise or drop needed. I have also linked you to...
view full answer... - Recommended Trailer Hitch for a 1992 Ford F-150 FlaresideThe Curt Trailer Hitch Receiver part # 14001 is a fit for a 1992 Ford F-150 Flareside and it's what I recommend using. It has a class IV rating with 2" receiver tube opening that will work great for towing, exceeding the capacity of the truck so you don't have to worry about weight capacity. If you don't already have a trailer wiring harness, you'll need to add the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118316.
view full answer... - Availability of Class IV Hitch for 1996 Dodge Ram SportAssuming your truck has the factory bumper, we offer the Curt Class IV # 14001. You'll want to ensure that your truck is rated to tow up to the capacity of the hitch. If the truck capacity is lower, you'll need to abide by the lower capacity. To complete your towing system, you might also need the following: Ball mount, part # 40331 2-5/16 inch trailer ball, part # 19286 2 inch trailer ball, part # A-90
view full answer... - What Grade Bolts are Used for the Curt Trailer Hitch Receiver # 14001 for a 1999 Dodge Ram PickupThe bolts that are used are Class 5 if they are Silver and Class 8 is they are a Gold color. If you are looking for replacement hardware for your Curt # 14001 Trailer Hitch, you can use the Replacement Hardware Kit, part # RHK. All you need to do is type in your hitch number on the # RHK product page and we will send you the correct replacement hardware.
view full answer... - Hitch Recommendation for a 1976 Ford F150 with a Deep Drop BumperA roll pan bumper is a bumper that basically makes the rear bumper look as if it does not stick out further than the rest of the truck and that is molded into the rear of the truck. Its basically a cosmetic modification that you see on a lot of lowered and/or show trucks. What you have is definitely a deep drop bumper. Check out the FAQ article I attached on bumper types for you to check out. With that being said, you will need a hitch designed for trucks with deep drop bumpers like the...
view full answer...
- Curt Hitch Recommendation for a 2001 Dodge RamYes the Curt Trailer Hitch # 14001 that you referenced will work on your 2001 Dodge Ram 1500 with an 8 foot bed because it is confirmed to fit all model Dodge Rams from 1981-2001. Since the bumper you replaced yours with is the same dimensions it should not pose a problem either. To complete your towing setup you may be interested in the following products also: Tow Ready Custom Fit Vehicle Wiring # 118329 (instructions and installation video attached) etrailer Ball Mounts # EBMK2416
view full answer... - Where is Draw-Tite Trailer Hitch Receiver For 2000 Dodge Ram Pickup MadeThe Draw-Tite Max-Frame Trailer Hitch Receiver # 75101 you were looking at is designed in the USA but produced in Mexico. If you are wanting a trailer hitch receiver made in the USA I have a few options. I recommend the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25132 as it is the only USA made trailer hitch receiver for your 2000 Dodge Ram Pickup that does not require drilling and will fit both long and short bed models with the standard or step rear bumper. If you are ok with an...
view full answer... - Reciever Tube Depth from Frame on the Curt Class IV Trailer Hitch for a 1985 Ford F-150From the bottom of the vehicle frame, where the hitch will mount, to the top of the receiver tube the distance is 5-1/2 inches. There is no additional spacer kit needed and the Curt Class IV Trailer Hitch, item # 14001, comes with installation hardware included.
view full answer... - Recommended Trailer Hitch Receivers for a 1986 Ford F-150 w/ Standard or Step BumperFor your 1986 Ford F-150 truck with the standard factory or step bumper we carry many trailer hitch receiver that will fit and work well for your application. For a heavy duty hitch, I recommend the B&W Heavy-Duty Trailer Hitch Receiver, # BWHDRH25122. The B&W hitch is designed to bolt-on to your vehicle's frame. There will be no need for welding. There will be a need for drilling holes into the frame of the vehicle to mount the hitch. The B&W hitch has a 1,600 lbs tongue weight and 16,000...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Sarah H
Video Edited:
Zack K
Video Edited:
Joshua S
Video by:
Andrew K
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ben
2/16/2021
After a year and several 10,000 tows. Still going strong and the finish is holding up nicely.