Where is Draw-Tite Trailer Hitch Receiver For 2000 Dodge Ram Pickup Made

Question

Question:

where is this part made? thanks.

asked by: A Y

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver # 75101 you were looking at is designed in the USA but produced in Mexico.

If you are wanting a trailer hitch receiver made in the USA I have a few options.

I recommend the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25132 as it is the only USA made trailer hitch receiver for your 2000 Dodge Ram Pickup that does not require drilling and will fit both long and short bed models with the standard or step rear bumper.

If you are ok with an option that requires some drilling another great option is the Curt Trailer Hitch Receiver # 14001 which you can see being installed on a 2001 Dodge Ram Pickup. This hitch will also fit long and short bed models with the standard or step rear bumper.

expert reply by: Samuel C

0

Answer 1

I can get the hole dimensions for you of the B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit part #BWHDRH25132 but it is not meant to fit a 2000 spartan MM newmar RV chassis so it will most likely be too narrow since it is designed to fit pick…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 6

Looking at the BAL Retract-A-Spare it has a much different design than the Lippert Spare Tire Winch #LC159056 you found. You may be able to mount the new winch so it will still work on your trailer but as we do not have both the products here with…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

Yes we do! The Curt Front Mount Hitch #C73ZV will be the correct hitch for your 2024 Ram 3500 Diesel Mega Cab. I just double checked with my contact at Curt and they confirmed that it will indeed fit the Diesel Mega Cab models. It will be a no drill…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

There are going to be two parts to the handle that you will need to operate the Lippert Components Spare Tire Winch part #LC159056. The first of which is the intermediate shaft or what Lippert calls a Crank Extension part #LC1315411. This will be…

view full answer...

Answer 11

The difference between load ranges varies based on the tire size and brand. When comparing two tires of the same size and brand, a load range D tire will always have a greater weight capacity and psi rating than a load range C. However, when…

view full answer...

Answer 12

The Replacement Crank Extension for Lippert Components Spare Tire Winch Assemblies #LC1315411, which is a replacement for Lippert Components Spare Tire Winch with Offset Cable #LC159056, has an inside diameter of 0.50 inches and the hex has a 0.75…

view full answer...

Where is Draw-Tite Trailer Hitch Receiver For 2000 Dodge Ram Pickup Made

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching