To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your Chevrolet Equinox's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Center section of fascia must be removed for hitch installation. No drilling required for installation , Access holes may need to be enlarged by drilling, filing, or rotary tool
Complete Towing Package for 2007 Chevrolet Equinox
2007 Chevrolet Equinox Owners Who Purchased This Trailer Hitch Also Bought...
Popular Equinox Trailer Hitch Accessories
Average Customer Rating: 4.9 out of 5 stars (864 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.They keep you updated on where it is in the shipping process. From the time I ordered it to when it arrived on my doorstep. And how great the quality of the hitch and wiring harness I ordered is. Factory holes lined perfectly! All around a GREAT company to order from. I HIGHLY recommend this company !!!
Hitch arrived in only three days. Instructions were great and easy to follow. Hitch installed with no problems. Highly recommend this hitch and company.
First time ordering from Etrailer. I had never heard of the company so I asked my daughters boyfriend, who is a mechanic. He said excellent company and he uses them for his customers.
This trailer hitch fit perfectly in my 2016 Equinox LT. It took 45 minutes for me to install it cause I used my daughters boyfriends lift. I tried lying on the ground on my back and lifting it in place but it was too heavy. If you go that route have someone help.
I even trimmed the plastic pop out cover to finish off the installation. Great product. Great company. Great price. Fast free shipping. Thank you.
John O.
7/31/2017
Fantastically
Carrieann was great helping me with my purchase. They are the reason Etrailer is great. The hitch and hitch rattle silenser I was able to install by myself with no trouble at all. It was a perfect fit. I would not buy from anyone but Etrailer, A very satisfied customer, Richard
Richard
8/26/2017
Its working out great. I installed it by myself with no problem using the help of my hydraulic jack.
Great hitch! Was easy to install. Would purchase again.
This hitch installed "without a hitch" - except I wish there was some magic rust remover for the frame nuts. That was the only difficult part. The parts fit exactly, and even though I anticipated a tough time fishing the center bolts through the bumper frame that was the easiest part! They came right through and dropped right into place. It looks like it was installed at the factory and I'm very happy with the product.
John T.
5/8/2015
still working great, no problems. Thanks!
Super easy install. Used the helpful videos. Would highly recommend to anyone looking for a hitch.
Kristin C.
8/24/2016
We still love it! We use it all the time to pull our trailer. Never had an issue it.
It would have been a five if I would have received the right hardware. The bolts I got were not the right ones for my car. Once I got the right bolts and ran them through the rust and crap it went on super easy. The Hitch was perfect except the hardware problem.
Hans
6/12/2023
Still going strong. Have had zero issues with the hitch
I really like this hitch. It was easy to install and has a nice finish. The instructions with my hitch as well as the etrailer video didn't indicate that my 2012 equinox may not have the two center weld nuts sense it didn't already have a factory hitch installed. I was a little confused at first but called etrailer and had an answer in minutes. Be sure to watch the video for the 2013 equinox if your 2012 doesn't have the center weld nuts. Etrailer has great customer service! I ordered it on a Monday night and had it by Thursday. What more can you ask for?
I also used the Curt wiring harness and I modified a Curt rubber tube cover to hold the harness. This gave everything a very clean, finished look.
The hitch is great, very well made. Installation was easy only had one problem with the last bolt on the drivers side, this might have been that the spacing of the threaded holes in the car frame might have been a little off. Fishing the carriage bolts went very easy with the supplied wire, no drilling required. I placed the hitch on a floor jack, rolled it into place, raised it, and it made it very easy to align to the center 2 carriage bolts and hold into place while I installed the nuts. The hardest part was torquing the bolts and nuts, wish I had a lift. This will be perfect for our bike rack and I really like the fact that you don't see anything but the center receiver. Great job Etrailer and Curt.
Etrailer could use a better packing box and some foam over the ends. Mine came with the ends sticking out of the box and were a little scratched.
The hitch arrived in good shape and on time. My 2004 Vue had very rusted frame nuts, so preparing them took patience and Rust blaster. I bought a tap as recommended for the do it yourselfer, but I made a superior thread cleaner from the included M12 bolt.
I first threaded a nut all the way on the shank, then cut a vertical slot 1/2 inch long in the threaded end. I ground the slot end at a slight angle to help it grab.I then backed the nut all of the way off to smooth the cut threads. Because of the close quarters on the frame, the hex headed tool allowed me to use my 19mm ratcheting box wrench to clean the threads.
The fishwire worked great!
All in all a doable project- clear instructions, correct hardware, and good fit!
Package was received with some damage but the hitch was not damaged. Installation went great once I cleaned out the weld nuts from 15 years of Minnesota dirt and salt. End result looks and works great.
Joe
6/27/2021
The hitch is working great. I pull a small enclosed trailer and I have had no problems. Great hitch and a great price.
This product is excellent in all ways.. shipped promptly and arrived ahead of schedule.
Install video was great and made it easy to do.
Product itself is high quality and especially the powder coat finish.
Good quality hardware and the wire tool to install it.
Cant say anything negative about the product or company.
I made a template out of cardboard and transferred cut out to the original cover then trimmed the plastic cover, installed it around the receiver hitch to clean up the rear valance.
dr bob's hot rods in Tempe AZ
Needed a trailer hitch for my bikes after trading in car that had hitch. Had option of 13 edge or 07 torrent which, had easier install rating and instructions. As warned in the 07 the holes had quite a bit of rust but the hitch installed easily and only would strongly recommend you have a 19MM socket for your ratchet.
Ordered Curt Trailer Hitch part number 13591 and Curt T-Connector part number 56094 on Friday afternoon. Received via UPS shipping Monday afternoon days ahead of schedule. Well pleased with fit and finish of products, will definitely recommend etrailer.com to my friends.
Ken ,.
9/25/2013
Gigot the trailer hitch and a bike rack, hitch took 20 min. To install, I give them an ,aaa rating highly recommend them fast shipping,great price, thank you.
Product fitment and ease of installation was perfect. The reciever hitch showed up in excellent condition and took me about 20 minutes to install. The instructions and videos on etrailer.com provided all the info I needed to install this product. Definitely heed thier advice about cleaning out the factory weld nuts. That was the only issue I had but it was quickly resolved with a nylon 3/4 inch bottle brush.
I installed this Curt Trailer Hitch on my 2017 Equinox today .. I did the work by myself , so I used a floor jack to raise the hitch into place .. Fit was perfect , working off the driveway took me about 45 minutes to complete ..
The product is a perfect fit for my 2012 GMC Terrain. The 2" looks so much better than that rinky dink 1 1/4 hitch from the factory (WHY GM?). I replaced the 1 1/4" because I was getting tired of putting 2 - 3 attachments on the hitch extending it out 2-3 feet when connecting a trailer.
This hitch is beefier than the factory hitch for sure. I had to use zip-ties to attach the wiring harness. It took me about 30-40 minutes.
I definitely recommend this product for your vehicle. Shipping was FAST. I ordered on a Friday afternoon and it arrived Tuesday the following week.
Just recieved my hitch with fairly quick free delivery. Install by a completely inexperienced person, who only watched the video posted on the site, took only about 30 min. And mostly that because how blistering hot is was outside with no cover. Literally if you can turn a wrench you can instal this hitch. I'm very pleased with both the product and the price.
The only thing I would note is that it was a pretty tight fit on a 2015 Chevy Equinox and I had to use a rubber mallet to line the holes up a little bit. ... And really that was my only issue.
I needed the trailer hitch for my bike rack. After I finished the installation I put the bike rack in the hitch and it work perfectly.
First, I would like to thank Rebecca N for her response to my question, which was "My car didn't have weld bolt for the top two center bolts, what can I do?". Rebecca N suggested that I use the same method to place the two center bolts as the Saturn Vue. I watched the installation video for the Vue, followed the instructions and it worked great.
I received the hitch late yesterday. Per the Vue video, I had to fish the top two bolts and spacers through the end of the bumper support so I did that last night. One of the spacers turned which caused it to hang up inside of the bumper support. I took a clothes hanger and bent it to made a 1 inch flat tip then pushed on the spacer until it worked free. The spacer and bolt moved right in place.
This morning I finished the installation and there was no one to assist. I used a vehicle jack on a rolling platform to manuver the hitch into place then jacked it up to allow me to put the nut on the top carriage bolts, then I fastened the bolts on the driver's side into the weld nuts attached to the vehicle.
There was a slight bind on the passenger's side so I pulled the jack over and jacked up the hitch and with just a little effort the hitch popped in place.
Hitch looks great and fits perfect on my 2012 Equinox. I was hung up a bit during the install: The way I perceived the Curt instructions that came with the hitch demonstrated the bolts going up through the hitch and in to the bumper bar (see picture). On this Equinox, The bolts, with the square spacers, need to drop down from the bumper bar, and the nut placed from below. Knowing this ahead of time would be a good time saver.
Excellent communication from etrailer staff. Product shipped immediately, as was installed quickly. Video instructions are excellent. The hitch was likely dropped during shipment, as it was delivered with two holes in the box with the outer flanges sticking out. There was minimal damage to the finish, but it would be nice to see more padding around the ends of the hitch. A tighter box may have helped as well.
The Receiver hitch looks well made and It appears all the parts are here. But, the packaging didn't do so well. If not for the assembly kit being taped extremely well directly to the hitch it most likely would have been lost. I will mount the hitch in a few days and will update this if any problems arise.
Priced this unit locally and saved $xxx on price and installation. Video was very helpful. Used floor jack and extra pair of hands to hold hitch in place for install. Took about 45 minutes using a ratchet but faster if you can use an impact gun. Like that the actual hitch is hidden. Liked that the fish wire was included.
Saturn Vue Redline hitch installSometime last month you were helping me with info for my 2006 Saturn Vue Redline Edition. I ordered last week, got the part in a day and a half later (way fast). Just got to install it today. It actually doesn't require cutting however I'm probably going to do it anyway. In the pictures attached you can see that the part installs just fine without cutting the bumper fascia as recommended by your tech's, but it does rest on top of the hitch and I dont like that so I'm going to do minor cutting. Anyway, here are a few pictures that you may use on your site. I am greatful for the service you provided otherwise I wouldn't have gone out of my way to take photo's, upload them, and write this email.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Don
5/28/2023
This site is such a blessing! Had EVERYTHING I needed. Bought the receiver and wiring harness! And both products are wonderful! Perfect fit and exactly made for my pontiac. The instructional videos they have on YouTube are easy to do and priceless!! Now I can haul our motorcycles without any issues! My son and I are having a blast this summer!!