Do I Need a Tow Package To Install 4-Way Trailer Wiring on 2012 Chevrolet Equinox

Question

Question:

I will be recieving my 2012 EQUINOX soon and want to order a Hitch And wire set, My question is, does my vehicle need to have a tow package from the OEM in order to use the basic flat wire 4 pin connector or do I have to buy the harness that must be wired through to the battery? thanks in advance for your guideance.

asked by: Ron P

0

Expert Reply:

We do have wiring kits, that will work with your 2012 Chevrolet Equinox, that do not require the vehicle have a tow package. However, the item you selected, Tow Ready T-One Vehicle Wiring Harness, part # 118264, will only fit the 2010-2012 Equinox models that are equipped with the factory tow package.

If your 2012 Chevrolet Equinox will not be equipped with a factory tow package, you could use either the Tow Ready Custom Fit Vehicle Wiring, # 118494, or the Curt Custom Fit Vehicle Wiring, # 56094. However, I would recommend the Tow Ready # 118494, as it is a circuit protected wiring harness, which will protect your vehicles electric system. The Tow Ready system will require you to run a power wire to the battery, but the trailer harness will be directly powered from the battery versus drawing power from the sensitive electrical system.

For a hitch, I would recommend the Curt Trailer Hitch, part # 13591, which is a Class III 2 inch hitch.

To complete your towing setup, you will need the following:
Curt Ball Mount, part # D-4
Hitch Pin and Clip, # PC3
1-7/8 Hitch Ball, part # 19260
2 Hitch Ball, part # 19247

I have linked instructions and a video installation of the Tow Ready Custom Fit Vehicle Wiring, # 118494. Also linked is a video installation of the Hidden Hitch Trailer Hitch, part # 87572, and an FAQ on trailer hitch installation tips.

expert reply by: Reno H

0

Answer 1

If your 2013 Chevy Equinox came with the factory trailer hitch and there is trailer wiring present you have the tow package and the correct trailer wiring harness you'd need is the #118264. Otherwise if you do not have the tow package you'll…

view full answer...

Answer 2

If your 2014 Chevy Equinox did not come with the factory tow package, then the factory connection point is probably not functional. You can test it with a circuit tester such as #PTW2993 while someone runs through the lighting functions on the…

view full answer...

Answer 3

The T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector #118264 is a great option for a wiring harness on your 2013 Chevy Equinox for use with your cargo carrier's light strip. I have added a link to a video…

view full answer...

Answer 4

I spoke with a local Chevrolet dealer and activating the tow package on your 2010 Chevrolet Equinox is more involved than having the fuses in place. They said depending on your specific vehicle, a few additional components may need to be added and…

view full answer...

Answer 5

It means that the vehicle, when properly equipped, can tow a trailer that weighs up to 3,500 pounds. If your 2012 Chevy Equinox is a model that is rated for 3,500 pounds then you will not have a problem towing a trailer weighing up to 3.052 pounds.…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...