Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(149 reviews)
Price: $163.86
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11555
Our Price: $163.86
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (149)
- Q & A (0)
- Photos
CURT Trailer Hitch - C11555
- Class I
- 1-1/4 Inch Hitch
- 2000 lbs GTW
- Visible Cross Tube
- CURT
- 200 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Drawbar, pin and clip sold separately
- Hitches assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11555 Curt Class 1 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2007 - 2016 Honda CR-V
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Manufacturer issue
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11555
Average Customer Rating: 4.7 out of 5 stars (149 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: James01/03/2024
2007 Honda CR-V
The hitch was mostly easy to instal on both cars and serves the purpose of carrying my bicycles! Bravo to etrailer!
by: Dennis 12/27/2022
Does the job I needed it to do, haven't had a problem. I had my mechanic install both the harness and hitch for a reasonable price. Overall very satisfied.
by: Boris G.02/01/2012
2012 Honda CR-V
I purchased 2012 Honda CR-V in December 2011. O.E. trailer hitch is $363 + $200 installation. At this time Curt trailer hitch #11555 is the only afetrmarket one to fit my car.
Instructions & installation:
Instead of enlarging the frame holes I filed down the 1x3 blocks to fit the holes.
Under body panel trim diagram is not for a redesigned 2012 CR-V.
It took moor then two hours of tinkering lying on my back, but the result is very satisfactory.
Sales people at "etrailer" have been very helpful in finding out which hitch fits my CR-V
Thanks
by: Gustav m03/21/2018
2007 Honda CR-V
This is the second Curt trailer hitch I have purchased and installed, earlier on my Mazda MX5 and now on my 2007 Honda CRV. Excellent products, perfect fit and very easy to install. I also purchased the Curt wire harness for both and they too were very easy to install.
E trailer has very good prices on their products and delivery was very fast.
I've also purchased in the past, wheels, tires and latches for my home built luggage trailer. E trailer is the best company, hands down, to do business with.
Thank you E trailer.
by: Michael08/26/2023
2014 Honda CR-V
Well, while the wiring harness went great, the hitch install did not. The overall quality of the hitch is good, except for ONE THING. As a tool and diemaker and a manufacturing engineer for over 40 years, I take issue with Curt for their design of the three short pieces to mount to the steel ring. They are too damn short. Should be at least a 1/4 inch per side (1/2 inch total) longer to ensure proper clamping pressure on the ring. The contact with the ring, due to how short they are, is marginal at best. Not a good design. I know, as I have been engineering workholding devices for CNC equipment for the past ten years. Sorry Curt, spend the extra few cents on some longer pieces of steel. Can't give it 5 stars. Sorry.
by: Tom K.02/20/2015
2009 Honda CR-V
Nicely made product, install went fairly smooth, I needed to file one of the spacer washers to fit into place. I have a 2009 Honda CRV and I didn't need to trim or remove body panel as was suggested in install instructions. Washer for tow loop ( muffler side ) could have been wider.
Tom K.
2/21/2016
Working out just fine, no issues. Good solid hitch.
by: David08/31/2022
I 1st ordered a draw tight hitch for the 2011 CRV and it did not fit.. After trying a second draw tight, which did not fit, I talked to Kaylin and we decided to try a Curt hitch. The Curt hitch fit perfectly. It is a 30 minute job to put this hitch in and it looks great! Great customer service!!!!!
by: Marlin06/11/2018
2014 Honda CR-V
Fit like it was made for it. Wait it was! My honda CR V is now a toy hauler, an 18.6 ft Hobie Tandem Island
by: Jeffrey05/28/2023
The trailer hitch works great. The only reason I am giving 4 stars instead of 5 was because there was something wrong with the installation but I can't remember exactly what it was.
by: Eric 04/19/2023
All parts fit as designed, were easy to install with two persons due to alignment and weight during install. A single installer would have made it more difficult.
The instructions were decent as long as you took your time to understand them, I had to review in order to comprehend as written.
Nice hitch for the price and install was done in my garage with basic tools. Will look to CURT if I need another towing product in the future.
by: Dennis E.03/03/2012
Seems to work well with our Hitch Bike Rack. This is a light duty Class I hitch; we'll see how this Hitch performs pulling a trailer load of spring mulch.
by: Allan06/07/2020
2011 Honda CR-V
The hitch fits perfect to our SUV. I've got pretty good deal on the sale price.
Product support team is very knowledgeable and they shipped my order so quickly. etrailer is highly recommended!
by: David C.09/23/2014
This is an excellent product. I got it due the cheapest installer wanted $325 plus tax including the light assembly. I never have put one on but got the product in the mail in two days with regular delivery and put it on the same day (with one helper). All you have to know how to do is drop the exhaust pipe (its easy with WD-40 on the rubber hangers). Took about one hour and I ordered the electric assembly (which again I had never done) and it took about 10 minutes. Great Product. Savings about $185 in 1 hour/ 10 minutes. Best of luck!!! 9/20/14
David C.
9/23/2015
year later and product just as satisfied with as when assembled.
by: Pedro10/23/2016
2009 Honda CR-V
Considering this was a first installing of this hitch it went pretty well for a learning curve. Everything lines up nicely. As other reviews have said there is no warning about installing the rubber muffler hanger (next to the hitch bar) BEFORE you install the hitch. Otherwise you'll be pushing, prodding and jamming it on past the hitch frame.
I used Dremel tool with metal cutting burr to cut the frame holes a little larger as per the instructions.
Pedro
10/23/2017
Still good after one year.
by: W. Dore 07/19/2016
2007 Honda CR-V
Nice product but the instructions and the pictures in my opinion were not very clear. This took longer than it should have because of the lack of clear and precise instructions. Once we got through the installation though the hitch works great.
W. D.
7/19/2017
Hitch working great just hope instructions were made easier to understand.
Rachael H.
7/19/2017
Thanks for the feedback. That is exactly why we shoot our install videos to show the process to our customers.
by: Eric 09/27/2022
Honda CRV comes with pre-drilled and tapped holes for mounting a hitch, not sure why but this one doesn't use those holes, rather it requires the modification of a larger pre-existing hole to pass hardware through the bottom with a fish wire. The tricky part is having a tool which will fit above the exhaust pipe to widen the hole. I will say eTrailer for the WIN because I was about to give up then I watched the install video which made it look easier. This requires some mechanical know how and ability to figure out how to cut through the steel frame. Hitch otherwise is solid and serves the purpose I needed, just wish I had purchased the one with the four hole attached which requires no vehicle mods. Extra star for eTrailer making a great video.
by: Brian T.05/19/2017
2009 Honda CR-V
etrailer did a nice job covering the installation if you choose to do it yourself. The hitch, proudly made in the USA, was reasonably priced and arrived in a matter of days. Well done etrailer!
Brian T.
5/19/2018
Great hitch overall for the price.
by: Scott R.07/29/2013
2010 Honda CR-V
Installation would have been better if I had read the instructions and understood them more clearly. Having the right tool to open up the holes in the frame is critical. If you don't have hand tool experience and a really good hole grinding tool this is not for you. If I didn't spend so much time figuring out how to open up the holes I would have been done in a half hour.
Scott R.
1/28/2015
All is good. We use it frequently with no issues. Thank you.
by: Dennis07/16/2021
Perfect for Thule bike rack. Very handy also for strapping my SUV tailgate down with my kayak sticking out beyond the bumper. This hitch beats all other prices for more expensive ones. I would highly recommend this to everyone who is looking for an aftermarket hitch.
by: SD08/05/2022
2007 Honda CR-V
The receiver fit perfect and was delivered quickly.
*This is a note about the product itself not etrailer*
Why do they make the plates just slightly larger than the manufactures holes on the frame?? I have installed 2 receivers now and each time you have to grind out the hole for the plate to fit. But its only like a 1/16" you need to remove?
by: John Robertson06/11/2011
2009 Honda CR-V
11555+S63360. Honda 2009 CRV + bike rack.
Delive packaging.
Hitch had punched 3 holes in the cardboard box. Thankfully the bolt kit was well secured to the hitch center, else it would have fallen out and got lost. The bike rack packaging was excellent.
Fitting the hitch.
Thanks for providing the fish wire, very easy to use per the instructions. Why are you asking the customer to damage their vehicles by filing? I ground chamfer edges on the 1" bar 'bolt washers' and they fitted thru the vehicle holes snugly.
Fitting the bike rack to the hitch.
Straight forward fitting but note that a 3/4" wrench is required to tighten the retaining bolt and undo it when you want to access to the trunk. My wife keeps a dedicated socket wrench in the car so this aspect of the rack is now a theft deterrent.
Straight forward fitting but note that a 3/4" wrench is required to tighten the retaining bolt and undo it when you want to access to the trunk. My wife keeps a dedicated socket wrench in the car so this aspect of the rack is now a theft deterrent.
" />
by: Bruce06/06/2018
2013 Honda CR-V
I had absolutely zero knowledge about trailer hitches and what I needed etc. What drew me to etrailer were all the helpful/educational YouTube videos they have produced. I called etrailer as a result, and had the good fortune to speak to Lacey. She was very helpful and knowledgeable. She coached me through everything I needed for my particular make and model of car. Most importantly, in my case, she asked (without pushing) if I wanted a hitch that required my frame to be drilled - or get a model that did not require me drilling the frame of my car. I definitely chose the latter and it was worth it to me. The product was shipped promptly and was very complete and very well made. The documentation was excellent including the exact measurements I needed to cut an access point in the panel underneath my car. The installation is very doable but you will need better than beginner skills I feel. But again, any video you might see of an installation, plus the instructions makes this worthwhile attempting. My only issue was I feel that the anchor bolts that went into the frame should have been engineered to slip right into place without requiring me to widen the holes. True, I did not have to drill into my frame, but the holes to receive the anchor bolts had to be bent wider or ground out larger to accommodate those bolts. The fit and finish of the hitch makes it look very professional. Overall a good experience.
by: Mark L.09/02/2011
Overall, product is as represented. Purchased to mount Thule 4 bike hitch mounted bike rack. Installation was a little more cumbersome than I expected. I needed a helper to hold the hitch in place so that the mounting bolts and rectangular washer were not pushed up into the mounting holes in the frame. The muffler had to be lowered from it's mounting blocks for the installation, and was a little difficult to get back in place because of the one arm of the hitch. Finally, a spacer block for the towing loop was missing, and had to be replaced by a 1/4" pc of aluminum stock that I had. On the plus side, I like the center support afforded by the tow loop bolt, more stability right near the load. The hitch looks great, doesn't protrude a lot from the bumper and has a neat appearance. I would appreciate stainless steel fasteners, using the hitch in the northeast U.S. there's lots of snow and salt in the winter. I would recommend this manufacturer to a friend.
25
149
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch with Trailer Wiring Mounting Tab Recommendation for a 2012 Honda CR-VThe Curt Mfg. Class I trailer hitch, # C11555, does not have a bracket welded to the cross tube for installation of a trailer wiring holder bracket, like part # 18144. You could install the # 18144 bracket on the hitch easily with the No Drill Mount Bracket, # 18140, see the video installation that I attached for you. If you are interested in a Class III trailer hitch like the Draw-Tite # 75547, that you mentioned, you could use the Draw-Tite Class III hitch, # 75742, which is the correct...
view full answer...
- Trailer Hitch and Wiring for a 2009 Honda CR-VSome vehicles may come with a factory tow package that includes other equipment or things may be tuned differently. But hitches can still be installed on models that do not have that factory tow package without having to add additional equipment or make any changes to the motor or transmission. That is why for some vehicles the owner's manual will state different capacities for models with and without the towing package. If you add a hitch to your 2009 Honda CR-V, such as # C11555, you...
view full answer... - Trailer Hitch Weight for a 2011 Honda CR-VI'd be happy to help! All of the hitches for your 2011 Honda CR-V weigh relatively the same when it comes to the different classes, and while the Class I hitches definitely weight lighter I recommend using a Class III hitch since they have a 2" receiver and can handle a wider variety of accessories. Out of the hitches listed below I recommend the Draw-Tite Hitch # 75547 since it's a Class III hitch with a weight of about 27 lbs. Here are the rest of the hitches: Class I Draw-Tite -...
view full answer...
- What Size Hardware is Used to Install a Trailer Hitch on a 2013 Honda CR-VFor the hardware used to install trailer hitches on your 2013 Honda CR-V it will depend on the hitch. Draw-Tite Class III hitch # 75742 and Class II hitch # 36520 use Hex Bolt M10X1.25X30 CL8.8 and a 3/8-16 U-Bolt. Curt trailer hitch # C11555 uses 1/2-13 x 2-1/2 LG and 2-7/16-14 x 1-1/2 carriage bolts along with matching block spacers. Curt hitch # C13119 uses a 7/16 - 14 x 1.75" x 1.00" C-C u-bolt and M10 - 1.25 x 30 hex bolts. If you have one of these hitches but not the hardware you...
view full answer... - Hidden Hitch Trailer Hitch # 87440 Recommendation for a 2008 Honda CR-V Towing a PWCIf your personal watercraft and trailer weighs less than 2,000 lbs and the tongue weight of the trailer weighs less than 200 lbs you could use a Class I hitch. For your 2008 Honda CR-V I would recommend you get a Class III hitch like the Hidden Hitch Trailer Hitch # 87440, as this hitch has higher towing capacities so it could tow your PWC trailer and if you decide to pull a heavier trailer down the road you would be able to that as well. You may also be interested in the following products...
view full answer... - Will Curt Hitch C11555 for a 2016 Honda CR-V Tow a Small TrailerIf the trailer weighs less than 2,000 lbs the Curt hitch part # C11555 that you referenced would be capable of towing it. This hitch has a 2,000 lb total trailer capacity and 200 lb tongue weight capacity. To complete your towing setup you would want the part # C45572 for a ball mount with a 2 inch ball or part # C45571 for a 1-7/8 inch hitch ball. For trailer wiring you would then want the Curt Harness part # C56158. I attached an install video for this plus one for the hitch as well.
view full answer... - Parts Needed To Tow Jet Ski on Trailer With 2007 Honda CR-VThe Class I Curt Trailer Hitch Receiver part # C11555 can be used to tow a jet ski if you can keep the tongue weight of your setup below 200 lbs. The tongue weight is 10-15% of the overall weight of the trailer and jet ski. It looks like you may have a 2007 Honda CR-V. I recommend Curt Class III trailer hitch receiver part # 13555 which is much more suitable for towing a small trailer because it has a 350 lb tongue weight rating. This option is much safer to use to tow the jet ski this...
view full answer... - Benefits Of Using A Class III Hitch For A 2014 Honda CR-VThe main reason you would use a class III hitch like the Draw-Tite Max-Frame Trailer Hitch Receiver # 75742 you referenced is because, the 2" x 2" receiver opening featured on a class III hitch is the most common size for hitch mounted accessories like the Thule T2 Pro XTR Bike Rack # TH83JV, and will give you more options versus a class I hitch. However, you can still absolutely use a class I hitch like the Curt Trailer Hitch Receiver # C11555.
view full answer... - Trailer Hitch, Ball Mount, Ball, and Wiring for a 2016 Honda CR-V to Tow a Northern Tool TrailerYes, ball mount # C45521 can be used for the Ironton trailer you plan to buy. That trailer has a 1-7/8 inch coupler meaning that you would need a 1-7/8 inch ball for the ball mount, # A-80. The ball mount fits a 1-1/4 inch trailer hitch receiver. If you do not have a 1-1/4 inch trailer hitch you would need one, # C11555. I have linked a video showing an example installation for you. And if you do not already have a trailer connector on your 2016 Honda CR-V you can add a 4-Way using #...
view full answer... - Install Instructions for Curt Trailer Hitch # C11555I attached a picture that shows the install instructions for the Curt hitch part # C11555 that you referenced for you to check out.
view full answer...
- Will the Thule Hitching Post Pro # TH934XTR Fit on a 2007 Honda CR-VThe Thule Hitching Post Pro # TH934XTR is compatible with Class I, II, and III trailer hitches that have 1-1/4" or 2" receivers and measures 13-1/2: from the center of the hitch pin hole to the back of the upright so you should have no problems fitting this on your 2007 Honda CR-V. Please note that if you have a Class I hitch, like part # C11555, installed on your CR-V then you can only carry 2 bikes. If you don't already have a trailer hitch installed then I highly recommend installing...
view full answer... - What Does Curt Trailer Hitch for 2011 Honda CR-V # C11555 WeighThe Curt trailer hitch part # C11555 that you referenced weighs a total of 17 lbs.
view full answer... - How is Hole Enlarged Typically on 2011 Honda CR-V to Install Curt Trailer HitchTo install the Curt hitch # C11555 you only need to shave down the edge of the holes slightly until you are able to slide in the 1 inch x 3 inch spacers. This can be done with a metal file or a rotary tool like a dremel like you mentioned would work as well.
view full answer... - How to Enlarge the Frame Access Holes on a 2007 Honda CRV When Installing Curt Trailer Hitch 11555You will not need to drill to enlarge the access holes on the frame of your 2007 Honda CRV. You only need to shave down the edge of the holes slightly until you are able to slide in the 1 inch x 3 inch spacers. This can be done with a metal file. The spacer will sit flat across the access hole once installed, so you will only need to make enough room to get the spacer and bolt in diagonally, so you can pull them back down and seat the spacer against the frame. Install the tow hook attachment...
view full answer... - Will The Curt Trailer Hitch # C11312 Fit My 2011 Honda CR-VI do have a hitch available that will fit your 2011 Honda CR-V, but the item you selected, Curt Hitch, part # C11312, will not fit. Part # C11312 is designed to fit the 2005 - 2009 Ford Mustang V6 Models. For a hitch similar to part # C11312, you will need the Curt Hitch, part # C11555, which is also a Class I 1-1/4 hitch and does not require any drilling to install on your 2011 CR-V. Part # C11555 has a tongue weight capacity of 200 lbs and a towing weight capacity of 2,000 lbs. If you...
view full answer... - Is Yakima HoldUp EVO 2 Bike Rack Compatible with 1-1/4 Hitch on 2013 Honda CR-VYes and yes! The Yakima HoldUp EVO # Y02480 is compatible with any 1-1/4 hitch receiver (Class I and II), like the Curt # C11555 and Draw-Tite # 36520. If the hitch on your 2013 Honda CR-V is a factory hitch, as long as it's not recessed more than 9 inches behind the bumper ( which is unlikely), it will fit without a problem. Because the HoldUp EVO secures your bikes by the wheels, the frame of your bikes won't make a difference, so it can easily accommodate bikes with step through or...
view full answer...
- Will My Curt Class 1 - 1-1/4 Hitch Work With 2 E-Bikes And Carrier On 2011 Honda CR-VI do have a great option for you, however since your 2011 Honda CR-V is equipped with the Curt Class 1 Trailer Hitch Receiver # C11555, you will need to use a Class I compatible carrier. The Swagman Current # S64678 that you were looking at will only work with Class II and above hitch receivers. With that in mind, your best option is the Thule EasyFold XT Bike Rack # TH903202, which is Class I approved, features a 65 pound per-bike capacity, and also includes an integrated ramp for easy...
view full answer... - Is there a Class III, 2 Inch Trailer Hitch Available for a 2012 Honda CR-VYes. There is one Class III, 2 inch trailer hitch available for a 2012 Honda CR-V. Take a look at Draw-Tite trailer hitch # 75742. I have included a link to the installation instructions for you as well. If you plan on doing some towing, I recommend the etrailer ball mount kit, # EBMK4. It comes with a ball mount, interchangeable ball set, a hitch pin and clip, and a carrying bag. For trailer wiring, use # 118561. I have included a link to the installation details and a link to a video...
view full answer... - Under Body Panel Trimming Location for Curt Trailer Hitch Installation on a 2012 Honda CR-VI spoke with my contact at Curt about the trimming diagram in the instructions for hitch # 11555. He stated that the instructions are specifically for the 2012 model so you should not need a different diagram when it comes time to trim the panel. I was able to obtain a picture, which I have attached, that shows where Curt had taped down the panel to trim for reference. I have also included a link to the installation details for you. If you are planning on doing some towing, the hitch...
view full answer...
- Hitch Extender Limitations For Bike RackIf you have a class III hitch receiver like # 75547 on your 2011 Honda CR-V then you'll be able to use an extension # C45795. Extensions will cut your hitches weight capacity in half so if you have a class I hitch like # C11555 you shouldn't use the extension. If you wanted to get more out of your extension, I would recommend getting the Kuat pivot 2 # PVP20B. This will give you FULL access to your back hatch whenever your parked getting ready for your ride or relaxing after a day on the trails.
view full answer... - Hitch Recommendation For 2012 Honda CR-V - Lighter LoadsIt sounds like you're wondering if a Class III hitch might be too strong for your 2012 Honda CR-V's towing towing application, or perhaps not the most ideal hitch. That's a great question to ask! You should always use a trailer hitch product that was engineered from the beginning with your 2012 Honda CRV's frame and specifications in mind, regardless of what you might be towing. But it's still a good idea to know why hitches have different classes and what they mean, especially if you...
view full answer... - Can Trailer Hitch Receiver and Wiring Harness From a 2011 Honda CRV Be Used on 2014 Honda CRVThe ability to use the hitch from your 2011 Honda CRV on the 2014 model is going to depend on which hitch you have. For example, I spoke with my contact at Curt and Trailer Hitch, # C11555, will fit multiple years of the CRV including the 2011 and the 2014 yet the other hitches we carry are not compatible with the newer model. If you happen to have a hitch that will work on the 2014, you will want to order new hardware before installing the hitch. Hardware is meant for one time installation...
view full answer... - Replacement Hardware to Install Curt Class I Hitch # C11555 on 2014 Honda CR-VThe Curt Class I hitch you referenced, part # C11555 is indeed compatible with your 2014 Honda CR-V. A replacement hardware kit is available. You would use part # RHK. Use the provided link, and when you get to the product page, type in C11555 in the field for item number and Curt in the field for hitch manufacturer.
view full answer... - Will a Trailer Hitch from a 2010 Honda CR-V Fit on a 2015 Honda CR-VThere is just one trailer hitch that fits both a 2010 Honda CR-V and a 2015 CR-V. It is Curt hitch # C11555. If you have a different hitch on your 2010 then it will not fit the 2015. I have included a link to the trailer hitches that fit a 2015 Honda CR-V for you.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Video by:
Andrew K
Video by:
Joshua S
Video by:
Andrew L
Written by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Patrick B
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dennis N.
12/30/2023
Excellent hitch. No problems whatsoever.