Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(17 reviews)
Price: $233.56
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11329
Retail:$396.95
Our Price: $233.56
You Save: $163.39
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (17)
- Q & A (0)
- Photos
CURT Trailer Hitch - C11329
- Class I
- 1-1/4 Inch Hitch
- 2000 lbs GTW
- Concealed Cross Tube
- CURT
- 200 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Drawbar, pin and clip sold separately
- Hitches assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11329 Curt Class 1 Trailer Hitch Receiver
Compare to Draw-Tite 24775
Installation Details
This Product Fits The Following Vehicles
- 2006 - 2008 Mazda 6 Sedan and 5 Door Hatchback
- 2006 - 2009 Ford Fusion
- 2006 - 2009 Mercury Milan
- 2007 - 2009 Lincoln MKZ
- 2006 - 2006 Lincoln Zephyr
Customer Satisfaction Score:
84% were satisfied with this product
16% of customers were not satisfied
- Too difficult to install
- Arrived Damaged
- Wrong item was ordered
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11329
Average Customer Rating: 4.6 out of 5 stars (17 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Ben 04/26/2024
Most importantly the hitch fit our vehicle as promised. The receiver is high quality with strong welds and a nice paint job. I haven't had to use it much yet but is ready!
by: Velo F.10/07/2020
Installation was a bit difficult because for some reason the steel in the bumper was pretty tough. The first screw to be threaded through with the little threading tool went well. The second one was more difficult because the spiral that engages into the screw threads was no longer perfect. If I had two of those threading gizmo's it would have gone easier for threading the bolt through the bumper. But I did get it on.
Once in place, I have to say that the fit was perfect. The hitch was right below the bumper and having had it on the car now for about two, maybe three months, I haven't scraped it yet. So, it is up high enough to stay out of the way when coming out of steep aprons.
I am happy with it and would buy this or one made by Curt again.
You may notice from the picture that I did have this hitch modified so that I could put a 2" receiver in. I know this doesn't automatically make it a class III, I just did it to keep my bike rack from swaying so much. It does work.
by: John 06/26/2023
The kit was put together well, including the alignment of the welds. It include all necessary hardware and has been working well for a year now.
by: Keith08/15/2022
It took a long time to receive the hitch and I didn’t immediately mount it to the car. When I did try to mount it I found that it was bent and I have not attempted to bend it back to the correct shape which I think is difficult as it is a compound bend. I thought as the car is older (2007 Mercury Milan 6 cylinder/dual exhaust) , it was difficult to source and I thought I could fit it. I still have the original box and all the parts if you are interested in exchanging it.
by: Brennon09/23/2021
the difficulty of your install will depend on your vehicle. I have extensive rust on my vehicle so it made it harder than it needed to be. the product and hardware from etrailer was good quality. No problems one year later. I'll be buying hitches from etrailer in the future
by: James06/29/2018
2008 Ford Fusion
Well built hitch. The only thing I'll have to say is have "quality" drill bits if you are installing on a Fusion. The bumper steel must be harden to withstand a rear crash. I dulled 3 and broke 1. Other than that the install was very easy. I loved the fish wire that came with the pack. Don't think I could get the bolts to the hole from the side into the drilled holes if it was not for the fish wire. I am truly glad that I found etrailer on the web. They have my business.
Thanks
by: Mark 08/08/2018
2008 Mercury Milan
Very prominent shipping and of course a very nice hitch. Curt's make hitches better today than the other 2 did years ago when they were also made here.
Great hitch go USA
by: Craig 08/18/2020
2009 Ford Fusion
Very easy to install yourself if you have the tools(drill, and several different sized bits). I’ve never installed a hitch before, but I watched the video, and followed the instructions. Took me 65 minutes from start to finish, including clean up. My Kuat Sherpa slid right in and isn’t going anywhere lol.
by: Morris 03/26/2020
Very sturdy well built hitch, one problem though is interference with spare tire wheel well. Otherwise great product, fishing line was genius.
by: Laverne06/17/2020
Solid construction. Perfect fit. Works perfect. I am very happy with customer service and support.
by: Only used it a few times but so far is great09/15/2019
2006 Mazda 6
Live in dry hot climate and use it to toe a kayak with a small car. Install was easy enough. Fits well. Works as expected.
Best thing I recall was my customer service experience with the company. They went above & beyond what I consider average. They went to extra mile to make my shopping experience easy.
by: Terry V.10/19/2015
Unit was easy to install, was very happy with quality. Will definitely will order in future on next project.
by: Art 11/11/2021
Easy to install
No issues
by: Daniel 08/14/2023
by: Pat 09/17/2022
by: Peter 05/31/2023
by: Ed05/08/2021
17
17
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch and Wiring for a 2006 Ford FusionThat was a nice gift but Hidden hitch trailer hitch 60282 will not fit a 2006 Ford Fusion. It used to fit 2010 to 2012 Fusions, 2010 and 2011 Mercury Milans, and 2010 to 2012 Lincoln MKZs. But that hitch is now discontinued. The comparable trailer hitch for the 2006 Ford Fusion is the Curt # C11329. If you plan on doing some towing the correct ball mount is # 3592. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # 118422. I have linked a video...
view full answer... - Will the Curt Trailer Hitch, # C11308, Fit a 2007 Mazda 6 Hatchback And WagonThe Curt Trailer Hitch, item # C11308, will fit the 2007 Mazda 6 Sport Wagon models only. For the 2007 Mazda 6 five door hatch back, and the 4 door sedan, you would need to use the Curt Trailer Hitch, item # C11329. Some items you may need to complete your Class I towing setup are listed below. Wiring, item # C59496, for the 2007 Mazda 6 Sport Wagon Wiring, item # 118405, for the Mazda 6 4 Door Sedan and 5 Door Hatchback Drawbar, item # 3593, for the 2007 Mazda 6 Sport Wagon Drawbar,...
view full answer... - Enclosed Cargo Carrier And Trailer Hitch For A 2008 Lincoln MKZTo be able to use the 23x47 Carpod Walled Cargo Carrier w/ Lid # M2205-2201 with your 2008 Lincoln MKZ, you'll first need a trailer hitch like the Curt Trailer Hitch Receiver # C11329. This trailer hitch is a class I trailer hitch with a maximum towing capacity of 2,000lbs, and has a maximum tongue weight capacity of 200lbs. Since # M2205-2201 is designed to work in 2" x 2" trailer hitch receivers, you'll need to use the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver # HTAD. This will...
view full answer... - Trailer Hitch Recommendation for a 2006 Lincoln ZephyrAt this time there is not a Class III, or larger 2 inch receiver hitch available for your 2006 Lincoln Zephyr. I have included a link to the available hitches for you. The most popular option is the Curt hitch, # C11329. To look at the installation instructions, click the provided link. I have listed some items you may need to complete your towing setup. Drawbar # 3592 Hitch Ball # 19256 or # 19258 Hitch Lock # e98879 Pin and Clip # PC2 Wiring # 119176KIT
view full answer... - Parts Needed to Use Darby Kayak Carrier DTA944-968-924 on 2007 Ford FusionThe hitches that are made or your 2007 Ford Fusion are the 1-1/4-inch Class I type, such as the Curt # C11329 that I recommend, so in order to use a 2-inch hitch-mount kayak carrier like the Darby # DTA944-968-924 you'll need a hitch adapter # HT5R to give you the needed 2-inch hitch opening. This adapter not only gives you the larger receiver opening but it also will give you 5-inches of rise (height gain) which will improve your ground clearance when using the Darby carrier. All adapters...
view full answer... - Recommended Trailer Hitch Receiver and 2 Bike Rack for 2008 Ford Fusion with Rear SpoilerFor your 2008 Ford Fusion I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11329. This hitch is an easy installation that you can do or have any local mechanic you trust do for you. I've attached the installation details to assist. The 1-1/4 inch hitch is decently recessed under the bumper of your vehicle, so I recommend the Thule EasyFold XT 2 Bike Platform Rack # TH903202. This bike rack will give you 8 inches from the center of the hitch pin hole to...
view full answer...
- Curt Trailer Hitch # 11329 Vs. Hidden Hitch # 60846 for a 2008 Lincoln MKZBoth the Hidden Hitch Trailer Hitch # 60846 and the Curt Hitch # 11329 are quality hitches and neither have had any quality or fit issues for us. I attached a page that shows both of these products side by side for you to check out. The only noticeable difference in construction between the two hitches is that the Hidden Hitch has a larger welded on bracket for securing the stinger of the hitch to the cross tube. This might give the Hidden Hitch a slight advantage. I attached installation...
view full answer... - Swapping Hitch Between Different Generations of Same VehicleThe Draw-Tite Class I hitch you referred to, part # 24865 is a fit for the 2010-2012 Ford Fusion, 2010-2011 Mercury Milan and the 2010-2012 Lincoln MKZ only. It won't fit your 2006 Fusion. For the 2006, you'd want the Curt # C11329. If you look at both hitches, as well as their installation procedure, you can see that the two hitches are quite different. I've linked you to install instructions and videos for both hitches. Even if the same hitch fit both vehicles, the hitch hardware is...
view full answer... - Can the Foot-Activated Liftgate Still Work with Trailer Hitch Installed on a 2015 Ford EdgeI recommend going with the Draw-Tite Trailer Hitch # 75234 for your 2015 Ford Edge. This is a Class III trailer hitch with a 2" receiver that will not prohibit the use of your foot-activated tailgate although you may have to kick straight out in a different spot than you do now (see attached picture). If you let me know what you will be using this hitch for I can make additional recommendations if necessary. As far as towing with your 2008 Ford Fusion is concerned, I took a look at the...
view full answer...
- Hitch Availability for a 2009 Lincoln MKZWe do have hitches available that have been confirmed to fit your 2009 Lincoln MKZ, but if Lincoln says you can't tow with your vehicle then we can't recommend you do so. Basically the hitch manufacturers will make hitches for vehicles as long as there is a demand for them, regardless of what the vehicle manufacturer recommends. For your vehicle you may still be able to carry a bike rack like the Swagman XTC2 # S64670 so a hitch like the Curt part # C11329 would work well for this.
view full answer... - Tips for Installing Curt 1-1/4 Trailer Hitch C11329 on a 2007 Mazda 6 Sport WagonYou should be able to just pop out the two rubber plugs in the trunk pan of your 2007 Mazda 6 Sport Wagon, using a flat head screwdriver or trim removal tool. The Curt model # C11329 does not require you to lower your exhaust to complete the installation, as the entire hitch assembly runs along the center of the vehicle, between the exhaust. Once you have popped out the two plugs, move straight back from these holes, staying in the center of the vehicle. Once you reach the inner bumper...
view full answer... - Fit of Trunk Mounted Bike Carrier on 2006 Mazda 6 HatchbackYour best bet would be to install a receiver hitch like the Curt Class I receiver, part # C11329. The hitch can be used as an attachment point for a bike rack. Because of the limited weight bearing ability of the Class I receiver, you will be limited to carrying two bikes and would need to choose a rack that is compatible with a Class I receiver. None of our bike rack manufacturers recommend using trunk mounted racks on the Mazda 6 hatchback model, because the hatchback is not strong...
view full answer... - What is Weight of Curt Hitch # C11329 and How Long to Install by ShopThe Curt hitch part # C11329 weighs 22 lbs which wouldn't make any noticeable difference for traction on a front wheel drive car. We've sold quite a few hitches over the years and we've yet to have anyone come back and tell us that winter weather traction was ever effected. Curt lists this hitch as taking about 45 minutes for a shop to complete the install. So less than an hour at their current shop rate. Most shops would charge at least one hour to do the install.
view full answer... - Hitch & Bike Rack Recommendation For 2008 Ford FusionThe Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11329 is the correct hitch for your 2008 Ford Fusion. However, if cost is your primary concern and the only thing, you're looking to haul are bicycles, you might consider a trunk mounted bike rack instead, which could cost about half as much as the hitch. The Hollywood Racks Express 3Bike Rack # HRE3 is a fine product that will meet that specific need. If you're interested in a hitch bike rack, you first need to know that...
view full answer... - Trailer Hitch that Fits 2009 Ford FusionWe have the Curt trailer hitch # C11329 for the 2009 Ford Fusion that has a towing capacity of 2,000 lbs. This capacity though is independent of the capacity of your vehicle. I tried looking up the capacity for it online and most places say it wasn't listed or it's not rated for any towing. So I really wouldn't feel comfortable telling you that your vehicle could tow a 1,500 lb trailer. Especially on the hills you describe. If you really wanted to do it though I would recommend checking...
view full answer... - Hitch and Roof Cargo Carrying Options for 2008 Lincoln MKZGood for you for checking out your car's capabilities before you use it to tow. Not everyone does that! Lincoln includes the following statement on page 176 of their online owner's manual for your 2008 MKZ: "Never tow a trailer with this vehicle. Your vehicle is not equipped to tow." All is not lost, as there are still several ways to transport your cargo items on the MKZ; it just won't be with a trailer. If you were to install Curt Class I hitch # C11329 on the MKZ you could use a Class...
view full answer... - Trailer Hitch and 4 Bike Carrying Recommendation for 2009 Lincoln MKZThe Curt # C11329 is indeed a fit for your 2009 Lincoln MKZ. This would work great for you. You can use an adapter like # HTAD, but there's 2 problems with doing that. Both the hitch and bike rack manufacturers state that no more than 2 bikes should be carried in a bike rack used in a Class I hitch. Adding a 3rd and 4th bike moves too much weight too far away from the hitch receiver tube which can apply enough leverage to damage the hitch or cause the attachment points to the vehicle...
view full answer... - Trailer Hitch and Bike Rack Recommendations for a 2008 Ford FusionClass I trailer hitches such as # C11329 can hold bikes but are limited to 2 bikes and the rack has to be compatible with a Class I hitch. I recommend the Curt # C18085 which will hold bikes weighing up to 45 pounds each. I have linked a video review of this rack for you.
view full answer... - Is There a 2 Trailer Hitch Available for a 2009 Ford FusionI do have an option for you, but they do not make a 2" trailer hitch receiver for your 2009 Ford Fusion to my knowledge. Instead, you will want to choose from the Curt Trailer Hitch Receiver part # C11329 which has a 1-1/4" receiver tube opening. In order to get a 2" receiver tube opening on your Fusion you will need to use an adapter like part # HTAD but please keep in mind that this will reduce the hitch capacity by 50%. If you can tell me what you need a 2" trailer hitch for, I would...
view full answer... - Trunk Mounted Bike Rack Recommendation for a 2006 Mazda Speed 6 HatchbackThere are no hitches available that are confirmed to fit your Mazda Speed 6, but in case you are looking for a way to transport bikes there is a trunk mounted bike rack option available. The Hollywood Racks Over-the-Top 2 Bike Carrier # HRF2 has been confirmed to fit your vehicle and would work well. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Swagman Easy-Out Women's and Alternative Frame Bike...
view full answer... - Differences in Trailer Hitch Installation Between a 2008 and 2009 Ford FusionThe 2008 and 2009 Ford Fusions are from the same generation meaning that as far as installing a trailer hitch goes, the steps and attachment points are going to be the same. The Curt hitch # C11329 will fit both the 2008 and 2009 models of the Ford Fusions. I have included a link to the installation details for Curt Hitch Trailer Hitch, # C11329, below for reference.
view full answer... - Can a 2008 Ford Fusion Accept a Class II Hitch to Allow Use of Wheelchair CarrierThe only trailer hitch offered for your 2008 Ford Fusion (a great car - I used to own one until an East Coast blizzard took her away from me) is the light-duty Class I Curt Trailer Hitch Receiver - Custom Fit # C11329 with a 200-lb tongue weight capacity. This hitch does not have the capacity to transport a wheelchair and carrier and no Class II hitches are available for the vehicle. Your option then is to use a small trailer (which will work with one of these Class I hitches). Local outdoor...
view full answer... - Which Trailer Hitches and Wiring Will Fit on a 2009 Ford FusionWe do have several hitches available for your 2009 Ford Fusion, but part 60254 is not one of them and has been discontinued. The comparable hitch to the one you referenced is the Curt Trailer Hitch, # C11329. You might also be interested in adding the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, # 118422. This is a T-one style harness that plugs in line with your vehicles taillights and provides a 4-Way connector at the rear of the vehicle. The powered converter requires...
view full answer... - Can a 2009 Lincoln MKZ Pull a Pop-Up CamperIn order to tow a trailer with a 2009 Lincoln MKZ you'll need a trailer hitch, trailer wiring harness, and ball mount/hitch ball. I will attach a list below with each of these options. In regards to capacity and compatibility, you'll have to refer to your copy of the owner's manual for this which should be located in the glove box. We cannot recommend deviating from the manufactures instructions. Curt Trailer Hitch Receiver part # C11329 Hopkins Plug-In Simple Vehicle Wiring Harness with...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
8/24/2022
Thanks for reaching back out. I am sending this to our customer service team and they will be in touch with you soon.